Alaska licensing guide

How to Get an Electrician, Plumber, Mechanical or Residential Contractor License in Alaska

How Alaska licensing works: the Division of Corporations, Business and Professional Licensing approves applicants, then PSI gives the residential contractor endorsement exam and the electrical and mechanical administrator exams; the Department of Labor Mechanical Inspection section gives journeyman certificate of fitness exams, using the 2020 NEC, 2018 UPC and 2012 IMC.

Alaska exams we cover

General contractors

Electrical

Plumbing

HVAC, refrigeration & gas

Need more than one exam? Exam packs from $29, or get all 15 Alaska exams for $49.See bundles

Which license do I need?

Find the work you do. In Alaska, two agencies split the trades. The Division of Corporations, Business and Professional Licensing (CBPL) licenses electrical and mechanical administrators, who supervise the work of an electrical or mechanical contractor, and gives the residential contractor endorsement. The Department of Labor's Mechanical Inspection section issues certificates of fitness to journeyman electricians and plumbers.

Alaska has no statewide general contractor trade exam: a general contractor registers with insurance, a bond and a business license, and only the residential endorsement (one to four units) needs an exam.

If you want to…You needExamsApply
Build or alter privately owned homes of one to four units as a general contractorGeneral Contractor Residential EndorsementCBPL page (opens in a new tab)
Supervise commercial electrical wiring for an electrical contractorElectrical Administrator: Unlimited Commercial WiringCBPL page (opens in a new tab)
Supervise residential wiring or low-voltage controls wiringElectrical Administrator: Residential Wiring; Controls and Control WiringCBPL page (opens in a new tab)
Supervise commercial or industrial plumbing, or residential plumbing and hydronic heatingMechanical Administrator: PlumbingCBPL page (opens in a new tab)
Supervise heating, ventilation, air conditioning, sheet metal, refrigeration, boilers or temperature controlsMechanical Administrator: HVAC, Refrigeration, Process Piping, Temperature ControlCBPL page (opens in a new tab)
Work as a journeyman or residential wireman electricianElectrician Journeyman or Residential Wireman Certificate of FitnessMechanical Inspection page (opens in a new tab)
Work as a journeyman plumber or install fuel gas pipingPlumber Journeyman or Plumber Gas (PG) Certificate of FitnessMechanical Inspection page (opens in a new tab)

How an Alaska license works

  1. STEP 1

    Qualify

    Administrators meet the experience rules in 12 AAC 32 or 39. Journeymen log hours as a trainee in a registered program (8,000 hours for a journeyman).

  2. STEP 2

    Apply

    Administrators apply to the CBPL and get an eligibility letter. Journeymen send an application packet to Mechanical Inspection.

  3. STEP 3

    Test

    Administrator exams are PSI exams at $150. Certificate of fitness exams are state-run. All are open book and 70% to pass.

  4. STEP 4

    License

    Administrator licenses run 2 years, expiring December 31 of odd years. Journeyman certificates run 2 years with 16 hours of continuing education.

Exact requirements are on each exam page. Mechanical Inspection publishes no question counts or topic weights for its exams, so those pages use a practice length of our own.

Watch the code editions

Alaska's exams are open book but pinned to specific editions: the 2020 NEC, the 2018 UPC, the 2012 IMC, NFPA 54 (2018) and the 2018 IRC. You may highlight and add permanent tabs, but not write in your books.

Try the free questions on any exam page.

Who to contact

Administrator licenses: CBPL

Juneau · 907-465-2550

commerce.alaska.gov CBPL (opens in a new tab)

Certificates of fitness: Mechanical Inspection

Anchorage · 907-269-4925

dol.alaska.gov testing info (opens in a new tab)

Administrator exam scheduling: PSI

855-746-8173