Massachusetts licensing guide

How to Get a Journeyman or Master Electrician, Plumber, Gas Fitter or Construction Supervisor License in Massachusetts

How trade licensing works in Massachusetts: Division of Occupational Licensure boards, PSI two-part exams (70% to pass) for journeyman and master electricians, plumbers and gas fitters, sheet metal workers, and the BBRS Construction Supervisor License. Fees, open and closed book rules, and next steps.

Massachusetts exams we cover

Plumbing

Plumbing

Journeyman Plumber

Part 1 of the Massachusetts journeyman plumber exam: 80 questions in 160 minutes on gas piping, venting, drain, waste and vent, water supply and the plumbing and gas rules in 248 CMR. Closed book, 70% to pass.

80 Q · 160 MIN · 70% TO PASS

Plumbing

Journeyman Gas Fitter

Part 1 of the Massachusetts journeyman gas fitter exam: 60 questions in 120 minutes on gas piping, equipment, appliances and venting under 248 CMR and NFPA 54. Closed book, 70% to pass.

60 Q · 120 MIN · 70% TO PASS

Plumbing

Master Plumber

Part 1 of the Massachusetts master plumber exam: 80 questions in 160 minutes on gas piping, venting, drain, waste and vent, water supply and the plumbing and gas rules in 248 CMR. Closed book, 70% to pass.

80 Q · 160 MIN · 70% TO PASS

Plumbing

Plumber Part 2

Part 2 of the Massachusetts journeyman and master plumber exams: 40 written questions on isometric analysis, trade calculations, gas piping and gas venting. Closed book, 70% to pass.

40 Q · 160 MIN · 70% TO PASS

Plumbing

Master Gas Fitter

The Massachusetts master gas fitter exam, Part 1 and Part 2 combined: 80 questions on gas piping, equipment and appliances, venting, combustion, dilution and ventilation air under 248 CMR and NFPA 54. Closed book, 70% to pass.

80 Q · 200 MIN · 70% TO PASS

Plumbing

LP Gas Installer

The Massachusetts LP gas installer exam, Part 1 and Part 2 combined: 65 questions on liquefied petroleum gas piping, equipment, venting and the 248 CMR and NFPA 58 rules. Closed book, 70% to pass.

65 Q · 160 MIN · 70% TO PASS

Electrical

Electrical

Journeyman Electrician

Part 1 of the Massachusetts journeyman electrician exam: 80 questions in 180 minutes on the NEC and Massachusetts amendments, covering services, grounding, wiring methods, motors, alarm systems, solar and battery storage. Open book, 70% (56) to pass.

80 Q · 180 MIN · 70% TO PASS

Electrical

Master Electrician

Part 1 of the Massachusetts master electrician exam: 90 questions in 240 minutes on the NEC and Massachusetts amendments, including state-specific requirements and advanced electrical theory. Open book, 70% (63) to pass.

90 Q · 240 MIN · 70% TO PASS

Electrical

Journeyman Electrician (Applied)

Part 2 of the Massachusetts journeyman electrician exam, the Applied exam: 30 questions in 60 minutes on Ohm's law circuit calculations, schematics and plans, materials, troubleshooting and testing, Massachusetts amendments and licensing laws. Open book, 70% (21) to pass.

30 Q · 60 MIN · 70% TO PASS

Electrical

Systems Technician

The Massachusetts systems technician (fire alarm and low-voltage systems) exam, Part 1 and Part 2 Applied combined: 90 questions on NEC alarm requirements, fire detection and notification, electrical theory, circuit calculations, troubleshooting and licensing laws. Open book, 70% to pass.

90 Q · 180 MIN · 70% TO PASS

Electrical

Systems Contractor

Part 1 of the Massachusetts systems contractor exam: 70 questions in 180 minutes on advanced electrical theory, NEC alarm requirements, intrusion detection and notification, and fire detection and notification. Open book, 70% (49) to pass.

70 Q · 180 MIN · 70% TO PASS

General contractors

HVAC, refrigeration & gas

Need more than one exam? Exam packs from $29, or get all 15 Massachusetts exams for $49.See bundles

Which license do I need?

Massachusetts licenses individuals, not contractor firms, through boards in the Division of Occupational Licensure: electricians, plumbers and gas fitters, and sheet metal workers. PSI gives the exams. Builders take the Construction Supervisor License exam from the Board of Building Regulations and Standards (BBRS). Home improvement contractors register with the state and do not take an exam.

If you want to…You needExamsApply
Do electrical work for hire as a journeymanJourneyman ElectricianBoard of Electricians page (opens in a new tab)
Run an electrical contracting business or supervise electriciansMaster ElectricianBoard of Electricians page (opens in a new tab)
Install, test and service fire alarm and low-voltage systemsSystems TechnicianBoard of Electricians page (opens in a new tab)
Run a fire alarm and low-voltage systems contracting businessSystems ContractorBoard of Electricians page (opens in a new tab)
Install or repair plumbing as a journeymanJourneyman PlumberBoard of Plumbers and Gas Fitters page (opens in a new tab)
Run a plumbing business or supervise plumbersMaster PlumberBoard of Plumbers and Gas Fitters page (opens in a new tab)
Install or repair gas piping and appliances as a journeymanJourneyman Gas FitterBoard of Plumbers and Gas Fitters page (opens in a new tab)
Run a gas fitting business or supervise gas fittersMaster Gas FitterBoard of Plumbers and Gas Fitters page (opens in a new tab)
Install LP gas salamanders and space heaters in buildings under constructionLP Gas InstallerBoard of Plumbers and Gas Fitters page (opens in a new tab)
Fabricate and install ductwork and sheet metal as a journeypersonUnrestricted Journeyperson Sheet Metal (J-1)Board of Sheet Metal Workers page (opens in a new tab)
Run a sheet metal business or supervise sheet metal workersUnrestricted Master Sheet Metal (M-1; M-2 Restricted has the same outline)Board of Sheet Metal Workers page (opens in a new tab)
Supervise construction, alteration or demolition of buildingsConstruction Supervisor License: Unrestricted (buildings under 35,000 cubic feet and 1-2 family) or Restricted (1-2 family only)BBRS page (opens in a new tab)

Our practice exams cover the exams listed above and the Unrestricted Construction Supervisor exam. The Restricted and Metal Roofing sheet metal exams, the pipefitter, refrigeration and sprinkler fitter exams and the CSL specialty exams are not covered yet.

How a Massachusetts trade license works

  1. STEP 1

    Qualify

    Electricians need a high school diploma, 600 hours of journeyman education and 8,000 hours of work. Plumbers and gas fitters need apprenticeship hours under 248 CMR 11. Construction supervisors need 3 years of construction or design experience.

  2. STEP 2

    Apply

    Apply to your board (online through eLIPSE). Review can take up to 30 days, and approval lasts 12 months.

  3. STEP 3

    Pass the exams

    Plumber, gas fitter and electrician exams have two parts, each scored separately at 70%. Retake only the part you fail. Sheet metal exams are a single exam.

  4. STEP 4

    License

    After you pass, pay the license fee in eLIPSE. Construction supervisors apply to the Division of Occupational Licensure within one year of passing.

Exact requirements are on each exam page. Check your PSI bulletin for the current rules.

Open book or closed book

The electrician exams are open book: bring the NEC, the Massachusetts amendments (527 CMR 12.00) and NFPA 72. Massachusetts adopted the 2026 NEC effective 4/24/2026, and the PSI bulletin adds code items about seven months after adoption. The sheet metal exams are open book: the 2009 IMC, NFPA 96 and 90A, the SMACNA manuals and 271 CMR for journeypersons, and the NASCLA business guide and 271 CMR for masters. The plumber and gas fitter exams are closed book and follow 248 CMR (2021 and 2023 editions), NFPA 54 (2012) and NFPA 58 (2011). The Construction Supervisor exams are open book on the 2021 IBC, IRC and IECC with the 10th edition Massachusetts amendments (780 CMR), 521 CMR and OSHA 29 CFR 1926: the Unrestricted exam is 75 questions in 240 minutes.

Try the free questions on any exam page.