North Carolina licensing guide

How to Get an Electrical, Plumbing, Heating or General Contractor License in North Carolina

How North Carolina contractor licensing works: three boards (Electrical Contractors, Plumbing, Heating and Fire Sprinkler Contractors, and General Contractors), PSI open-book exams, Business and Law exam, classifications, fees and next steps.

North Carolina exams we cover

Electrical

General contractors

Plumbing

HVAC, refrigeration & gas

Need more than one exam? Exam packs from $29, or get all 11 North Carolina exams for $49.See bundles

Which license do I need?

North Carolina licenses contractors, not individual journeymen or masters. Three boards run the licensing and PSI gives every exam: the Board of Examiners of Electrical Contractors, the Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors, and the Licensing Board for General Contractors (required for projects of $40,000 or more).

If you want to…You needExamsApply
Run an electrical contracting business (Limited, Intermediate or Unlimited)Electrical ContractorNCBEEC page (opens in a new tab)
Build or manage commercial, industrial, institutional or residential buildings of $40,000 or moreGeneral Contractor: BuildingNCLBGC page (opens in a new tab)
Build homes and other residential units of $40,000 or moreGeneral Contractor: ResidentialNCLBGC page (opens in a new tab)
Run a plumbing contracting business (Class I or II)Plumbing ContractorPHFS Board page (opens in a new tab)
Install steam, vapor or hot-water (hydronic) heating (Group 1)Heating Group 1 ContractorPHFS Board page (opens in a new tab)
Install forced-air heating and cooling of 15 tons or less, including all single-family systems (Group 3)Heating Group 3 ContractorPHFS Board page (opens in a new tab)
Install forced-air systems over 15 tons (Group 2)Heating Group 2 ContractorPHFS Board page (opens in a new tab)
Install fuel piping only, without a plumbing or heating licenseFuel Piping ContractorPHFS Board page (opens in a new tab)
Run a single-family detached dwelling electrical business (SP-SFD)Special Restricted Electrical: SP-SFDNCBEEC page (opens in a new tab)

How a North Carolina contractor license works

  1. STEP 1

    Pick your board

    Electrical contractors apply to the NCBEEC, general contractors to the NCLBGC, and plumbing, heating and fire sprinkler contractors to the PHFS Board.

  2. STEP 2

    Get approved

    Each board reviews your application and experience, then releases you to PSI: a 90-day approval (electrical), a 120-day letter (general contractor) or a PSI email (plumbing and heating).

  3. STEP 3

    Pass the open-book exam

    Every exam is open book through PSI, 70% to pass (plumbing and heating pass scores are not published). Bring your own tabbed books.

  4. STEP 4

    Get licensed

    After you pass, the board completes your license. General contractors need Business and Law as well as the classification exam.

Other classifications (other electrical special classes, fire sprinkler, code inspectors) have their own exams and are not covered yet. Exact requirements are on each exam page.

Watch the code editions

North Carolina exams use the 2018 NC State Building Code (2015 ICC codes with NC amendments) and, for electrical, the 2020 NEC with the 2013 NFPA 72. The 2024 NC codes are delayed to no earlier than May 1, 2027, so the 2018 books are still the ones on the exams. Our questions follow the editions on the boards' reference lists.

Try the free questions on any exam page.

Who to contact

Electrical: NCBEEC

Garner · (919) 733-9042

ncbeec.org (opens in a new tab)

General contractors: NCLBGC

Raleigh · (919) 571-4183

nclbgc.org (opens in a new tab)

Plumbing and heating: PHFS Board

Raleigh · (919) 875-3612

nclicensing.org (opens in a new tab)

Exam scheduling: PSI

(855) 746-8173