South Carolina licensing guide

How to Get a Contractor, Electrical, Plumbing or HVAC License in South Carolina

How South Carolina licensing works: the LLR Contractor's Licensing Board (commercial general and mechanical contractors) and the Residential Builders Commission (residential builders and specialty contractors) approve applicants, then PSI gives the open-book Business Management and Law exam plus a trade exam, based on the 2021 or 2024 South Carolina codes and the 2020 or 2023 NEC.

South Carolina exams we cover

General contractors

Electrical

Plumbing

HVAC, refrigeration & gas

Renovation

Roofing

Need more than one exam? Exam packs from $29, or get all 15 South Carolina exams for $49.See bundles

Which license do I need?

Find the work you do. South Carolina has two licensing boards under the Department of Labor, Licensing and Regulation (LLR). The Contractor's Licensing Board licenses commercial general and mechanical contractors (electrical, plumbing, air conditioning, heating and others). The Residential Builders Commission licenses residential builders and specialty contractors. PSI gives every exam, and all contractor exams are open book.

South Carolina has no statewide journeyman or master electrician or plumber exam; those are handled locally.

If you want to…You needExamsApply
Build commercial buildings up to three stories (Groups 1 to 3)Commercial General Contractor: Limited BuildingContractor's Licensing Board page (opens in a new tab)
Run an electrical contracting businessMechanical Contractor: ElectricalContractor's Licensing Board page (opens in a new tab)
Run a plumbing contracting businessMechanical Contractor: PlumbingContractor's Licensing Board page (opens in a new tab)
Install air conditioning, heat pumps and ductwork in commercial buildingsMechanical Contractor: Air ConditioningContractor's Licensing Board page (opens in a new tab)
Build, remodel or repair homes and small apartment buildings (up to three stories and 16 units)Residential BuilderResidential Builders Commission page (opens in a new tab)
Install or service residential heating and air conditioningResidential Specialty Contractor: HVACResidential Builders Commission page (opens in a new tab)
Install or service commercial heating systems and boilersMechanical Contractor: HeatingContractor's Licensing Board page (opens in a new tab)
Install or service commercial refrigeration systemsMechanical Contractor: RefrigerationContractor's Licensing Board page (opens in a new tab)
Install packaged air conditioning and heat pump equipmentMechanical Contractor: Packaged Equipment-Heat PumpContractor's Licensing Board page (opens in a new tab)
Interior and exterior remodeling and finish work that does not alter load-bearing structureSpecialty Contractor: Non-Structural RenovationContractor's Licensing Board page (opens in a new tab)
Install and repair roofingSpecialty Contractor: RoofingContractor's Licensing Board page (opens in a new tab)
Do electrical work in homes and small apartment buildings (up to three stories and 16 units)Residential Specialty Contractor: ElectricalResidential Builders Commission page (opens in a new tab)
Do plumbing work in homes and small apartment buildings (up to three stories and 16 units)Residential Specialty Contractor: PlumbingResidential Builders Commission page (opens in a new tab)

How a South Carolina contractor license works

  1. STEP 1

    Qualify

    Commercial: a primary qualifying party with 2 of the last 5 years of full-time experience in the classification. Residential builder: 1 year of experience under a licensed builder.

  2. STEP 2

    Apply

    Apply to the Contractor's Licensing Board or the Residential Builders Commission first. Approval gives you an eligibility letter to register with PSI.

  3. STEP 3

    Two exams

    Pass Business Management and Law and your trade exam with PSI. All are open book; the Board requires 70% on each.

  4. STEP 4

    License

    Send your results, the fee and a financial statement or bond (builders: $15,000 bond). Commercial work above $10,000 in job cost needs a license.

Commercial trade exams: two attempts in 12 months, then one every six months. Residential exams: three attempts in 12 months, then a 12-month wait. Exact requirements are on each exam page.

Watch the code editions

South Carolina is moving from the 2021 ICC codes and 2020 NEC (with state modifications) to the 2024 ICC codes and 2023 NEC. From November 1, 2026 PSI's exams accept either set. After July 1, 2027 only the 2024 codes and the 2023 NEC apply. Our questions are written to be correct under both editions, and we note any item that turns on one edition.

Try the free questions on any exam page.

Who to contact

Commercial licensing: Contractor's Licensing Board

Columbia · (803) 896-4686

llr.sc.gov/clb (opens in a new tab)

Exam scheduling: PSI

(855) 340-3701

test-takers.psiexams.com/sccon (opens in a new tab)test-takers.psiexams.com/scrb (opens in a new tab)