Georgia licensing guide

How to Get an Electrical, Plumbing or Conditioned Air Contractor License in Georgia

How Georgia licensing works: the Construction Industry Licensing Board licenses electrical contractors (Class I and II), conditioned air contractors (Class I and II), master plumbers (Class I and II), journeyman plumbers and low voltage contractors through PSI exams with a scaled passing score of 70. The 2023 NEC and the 2024 Georgia plumbing, mechanical and gas codes are the main references.

Georgia exams we cover

Electrical

HVAC, refrigeration & gas

Plumbing

General contractors

Need more than one exam? Exam packs from $29, or get all 12 Georgia exams for $49.See bundles

Which license do I need?

Find the work you do. In Georgia, the Construction Industry Licensing Board licenses electrical contractors (Class I restricted and Class II unrestricted), conditioned air contractors (Class I and II), master plumbers (Class I and II), journeyman plumbers and low voltage contractors. PSI gives all of the exams.

Residential and general contractors are licensed by a separate board and take the Georgia Business and Law exam plus a trade exam. Electricians below the contractor level and HVAC technicians are licensed locally, not by the state.

If you want to…You needExamsApply
Run an electrical contracting business (single-phase, 200 amps or less)Electrical Contractor Class I (restricted)Georgia CILB page (opens in a new tab)
Run an electrical contracting business of any sizeElectrical Contractor Class II (unrestricted)Georgia CILB page (opens in a new tab)
Install and service heating and air conditioning systemsConditioned Air Contractor Class I or IIGeorgia CILB page (opens in a new tab)
Work as a plumber for a plumbing contractorJourneyman PlumberGeorgia CILB page (opens in a new tab)
Run a plumbing business (single-family, small two-family and commercial up to 10,000 sq ft)Master Plumber Class I (restricted)Georgia CILB page (opens in a new tab)
Run a plumbing business of any sizeMaster Plumber Class II (unrestricted)Georgia CILB page (opens in a new tab)
Install alarm, telecommunications or other low voltage systemsLow Voltage Contractor (Alarm, General, Telecommunications or Unrestricted)Georgia CILB page (opens in a new tab)
Build or remodel homes as a residential contractorResidential-Basic ContractorResidential and General Contractors board page (opens in a new tab)
Build residential and light commercial projectsResidential-Light Commercial ContractorResidential and General Contractors board page (opens in a new tab)
Build commercial buildings as a general contractorGeneral Contractor (or General Contractor Limited Tier)Residential and General Contractors board page (opens in a new tab)
Manage water, sewer and other underground utility constructionUtility ManagerGeorgia CILB (Utility Contractors) page (opens in a new tab)

How a Georgia contractor license works

  1. STEP 1

    Qualify

    Meet the experience and reference rules for your license (Rules 121-3). Electrical contractors must be 21.

  2. STEP 2

    Apply

    Send the Board your application and the $40 fee. PSI cannot schedule you until the Board approves you.

  3. STEP 3

    Test

    Register with PSI and pass a scaled exam with a score of 70. Most are open book; the master plumber exams are closed book.

  4. STEP 4

    License

    Send your results and the license fee to the Board. Georgia has no statewide journeyman or master electrician license.

If you fail an exam twice, the PSI bulletin requires a Board-approved review course before the third try. Exact requirements are on each exam page.

Watch the code editions

Georgia's exams use the 2023 NEC for electrical and low voltage, and the 2024 Georgia Plumbing, Mechanical and Gas Codes (2024 IPC, IMC and IFGC with Georgia amendments) for plumbing and conditioned air. The 2018 editions were accepted only until May 1, 2026. Our questions follow the editions on the Board's reference lists.

Try the free questions on any exam page.