Rhode Island licensing guide
How to Get an Electrician, Plumber or Contractor License in Rhode Island
How Rhode Island licensing works: the Department of Labor and Training's Division of Professional Regulation licenses electricians, plumbers and the mechanical trades (pipefitter, refrigeration, sheet metal, sprinkler fitter) by examination, and the Contractors' Registration and Licensing Board uses PSI for commercial roofing, well driller, pump installer and underground utility exams. General building contractors are registered, not tested.
Rhode Island exams we cover
Electrical
Electrical
Journeyman Electrician
The Department of Labor and Training's written exam for a Rhode Island journeyman electrician (Certificate B). The DLT publishes no question count, time or topic weights, so this practice bank follows the NEC and Rhode Island electrical law. An average of 70% is needed to be licensed.
70% TO PASS
Electrical
Master Electrician
The Department of Labor and Training's written exam for the Rhode Island electrical contractor license (Certificate A), the master level. The DLT publishes no format, so this bank follows the NEC, Rhode Island electrical law and contractor rules. An average of 70% is needed.
70% TO PASS
Plumbing
Plumbing
Journeyman Plumber
The Department of Labor and Training's written exam for a Rhode Island journeyman plumber. The DLT application lists 50 multiple-choice questions based on the 2018 IPC (Rhode Island adopted the 2021 IPC effective December 1, 2025; confirm with the DLT). Pass is 70.
50 Q · 70% TO PASS
Plumbing
Master Plumber
The Department of Labor and Training's written exam for a Rhode Island master plumber. The DLT application lists 50 multiple-choice questions based on the 2018 IPC (Rhode Island adopted the 2021 IPC effective December 1, 2025; confirm with the DLT). Pass is 70. This practice bank covers the plumbing code, design and sizing, and Rhode Island plumbing law and business rules.
50 Q · 70% TO PASS
Roofing
Water & wastewater
Water & wastewater
Well Driller
The CRB's PSI exam for a Rhode Island well driller license: 50 open-book questions in 2 hours on drilling methods, wells and pumps, casing, grouting, contamination prevention and safety. 70% to pass.
50 Q · 120 MIN · 70% TO PASS
Water & wastewater
Pump Installer
The CRB's PSI exam for a Rhode Island pump installer license: 40 open-book questions in 100 minutes on pump installation and repair, electrical, water chemistry, piping and tanks. 70% to pass.
40 Q · 100 MIN · 70% TO PASS
Water & wastewater
Water Filtration
The CRB's PSI exam for a Rhode Island residential water-filtration/treatment-system contractor license: 35 open-book questions in 90 minutes, mostly water conditioning, piping and Rhode Island rules. 70% to pass.
35 Q · 90 MIN · 70% TO PASS
General contractors
Need more than one exam? Exam packs from $29, or get all 9 Rhode Island exams for $49.See bundles
Which license do I need?
Find the work you do. In Rhode Island, the Department of Labor and Training's Division of Professional Regulation licenses electricians, plumbers and the mechanical trades by its own written exams. The Contractors' Registration and Licensing Board uses PSI for commercial roofing, well driller, pump installer, underground utility and water-filtration exams. General building contractors are registered, not tested. The pipefitter, refrigeration, sheet metal, sprinkler and oil burner exams aren't covered here yet.
| If you want to… | You need | Exams | Apply |
|---|---|---|---|
| Work as a journeyman electrician | Journeyman Electrician (Certificate B) | Department of Labor and Training page (opens in a new tab) | |
| Run an electrical contracting business | Electrical Contractor (Certificate A, master level) | Department of Labor and Training page (opens in a new tab) | |
| Work as a journeyman plumber | Journeyman Plumber | Department of Labor and Training page (opens in a new tab) | |
| Run plumbing work as a master plumber | Master Plumber | Department of Labor and Training page (opens in a new tab) | |
| Do commercial or industrial roofing | Commercial Roofing Contractor | Contractors' Registration and Licensing Board page (opens in a new tab) | |
| Drill water-supply wells | Well Driller | Contractors' Registration and Licensing Board page (opens in a new tab) | |
| Install and service well pumps and pressure tanks | Pump Installer | Contractors' Registration and Licensing Board page (opens in a new tab) | |
| Install underground sewer, storm drain and water lines outside buildings | Underground Utility Contractor | Contractors' Registration and Licensing Board page (opens in a new tab) | |
| Install and service residential water-filtration and treatment systems | Residential Water-Filtration Contractor | Contractors' Registration and Licensing Board page (opens in a new tab) |
How a Rhode Island trade license works
STEP 1
Qualify
Electricians and plumbers need years of experience and related instruction (for example 4 years for a journeyman electrician, 5 for a journeyman plumber) under RIGL 5-6 and 5-20; see the DLT application. The CRB trade exams have no prerequisite to sit.
STEP 2
Apply or schedule
For electrician and plumber exams, file with the Department of Labor and Training ($75). For CRB trades, register with PSI directly ($180).
STEP 3
Take the exam
The DLT gives its exams on paper and mails the date. The CRB exams are open book on computer with PSI, 70% to pass.
STEP 4
Get licensed
The DLT issues electrician and plumber licenses. For CRB trades you pass the exam first, then apply to the CRB.
The DLT application says the plumber exams have 50 multiple-choice questions and that 70 passes. The DLT doesn't publish a time limit, open-book rule or topic weights for the plumber exams, or a question count for the electrician exams (our electrician length is an estimate), so the practice banks are built from the statutes and adopted codes. Exact requirements are on each exam page.
Watch the code editions
Rhode Island adopted the 2023 NEC and the 2021 IPC with state amendments effective December 1, 2025. The electrician exam rule says questions follow the NEC edition adopted at the time of the exam, and the DLT study list names the current NEC (latest state-approved edition) plus general trade knowledge. The plumbers application says the exam is based on the 2018 IPC, which predates the 2021 adoption, so confirm the edition with the Division (401-462-8580) before you buy books. The PSI contractor exams list their own editions (for example the 2017 NEC for pump installers) and the bulletin says code questions use only the listed edition.
See the exam pages for electricians and plumbers.
Who to contact
Electrician and plumber licensing: DLT
(401) 462-8580, Cranston
Trade license study materials (opens in a new tab)Applications (opens in a new tab)
CRB exams: PSI
(855) 746-8173
test-takers.psiexams.com/ricon (opens in a new tab)Contractors' Board (opens in a new tab)