Maryland licensing guide

How to Get an Electrician, Plumber, HVACR or Home Improvement License in Maryland

How Maryland licensing works: the State Board of Electricians, Board of Plumbing, Board of HVACR Contractors and the Home Improvement Commission approve applicants, then PSI gives the open-book trade exam (70% to pass), based on the NEC, the International Plumbing, Fuel Gas and Mechanical Codes, and the Maryland home improvement law.

Maryland exams we cover

Electrical

Plumbing

HVAC, refrigeration & gas

HVAC, refrigeration & gas

Master HVACR Contractor

The PSI exam for the Maryland master HVACR contractor license: 100 questions on refrigeration and air conditioning, electrical controls, heating, piping and air distribution. Open book, 70% to pass.

100 Q · 240 MIN · 70% TO PASS

HVAC, refrigeration & gas

HVACR Journeyman

The PSI exam for the Maryland HVACR journeyman license: 100 questions on refrigeration and air conditioning, electrical controls, heating, piping and air distribution. Open book, 70% to pass.

100 Q · 240 MIN · 70% TO PASS

HVAC, refrigeration & gas

Limited HVACR Contractor

The PSI exam for the Maryland limited HVACR contractor license: 50 questions on electrical controls, piping, refrigeration and air conditioning, heating, air distribution and safety. Open book, 70% to pass.

50 Q · 120 MIN · 70% TO PASS

HVAC, refrigeration & gas

Restricted Air Conditioning

The PSI exam for the Maryland master restricted and journeyman restricted air conditioning licenses: 50 questions on electrical controls, piping, refrigeration and air conditioning, and safety. Open book, 70% to pass.

50 Q · 120 MIN · 70% TO PASS

HVAC, refrigeration & gas

Restricted Refrigeration

The PSI exam for the Maryland master restricted and journeyman restricted refrigeration licenses: 50 questions on electrical controls, piping, refrigeration and air conditioning, and safety. Open book, 70% to pass.

50 Q · 120 MIN · 70% TO PASS

HVAC, refrigeration & gas

Restricted Ventilation

The PSI exam for the Maryland master restricted ventilation license: 40 questions on electrical controls, air distribution and safety. Open book, 70% to pass. The journeyman restricted ventilation exam is air distribution and safety only.

40 Q · 90 MIN · 70% TO PASS

General contractors

Need more than one exam? Exam packs from $29, or get all 14 Maryland exams for $49.See bundles

Which license do I need?

Find the work you do. In Maryland the Department of Labor runs separate boards: the State Board of Electricians, the Board of Plumbing, the Board of HVACR Contractors and the Home Improvement Commission. PSI gives every exam. Maryland has no state general contractor license for commercial work, which is handled locally, and some counties, Baltimore City and WSSC also license trades.

If you want to…You needExamsApply
Run an electrical business or supervise electrical workMaster ElectricianState Board of Electricians page (opens in a new tab)
Do electrical work under a master electricianJourneyperson ElectricianState Board of Electricians page (opens in a new tab)
Run a plumbing and gas fitting businessMaster Plumber/Gas FitterState Board of Plumbing page (opens in a new tab)
Do plumbing and gas fitting under a master plumberJourney Plumber/Gas FitterState Board of Plumbing page (opens in a new tab)
Install and service natural gas piping and appliancesNatural Gas Fitter (master or journey)State Board of Plumbing page (opens in a new tab)
Run a heating, ventilation, air conditioning and refrigeration businessMaster HVACR ContractorState Board of HVACR Contractors page (opens in a new tab)
Do HVACR work under a master contractorHVACR JourneymanState Board of HVACR Contractors page (opens in a new tab)
Maintain or repair (not install) HVACR systems as a contractorLimited HVACR ContractorState Board of HVACR Contractors page (opens in a new tab)
Install or service one HVACR specialty (air conditioning, refrigeration or ventilation)Master Restricted or Journeyman Restricted HVACRState Board of HVACR Contractors page (opens in a new tab)
Remodel, repair or add onto homes as a contractorHome Improvement ContractorHome Improvement Commission page (opens in a new tab)
Sell home improvement work for a contractorHome Improvement SalespersonHome Improvement Commission page (opens in a new tab)

How a Maryland license works

  1. STEP 1

    Qualify

    Each board sets its own experience rules, for example 7 years for a master electrician, 4 years for a journey plumber and 2 years of trade experience for a home improvement contractor.

  2. STEP 2

    Apply to PSI

    Submit the exam application online at PSI. After the board approves it, PSI emails how to pay and schedule.

  3. STEP 3

    Pass the exam

    Every trade exam is open book and needs 70% to pass. You bring tabbed copies of the listed references.

  4. STEP 4

    Get licensed

    After you pass, the board sends you the license application. Master HVACR owners and permit holders also file liability insurance.

Exact experience rules, fees and waiting periods are on each exam page.

Watch the code editions

Maryland's PSI exams are open book, but their reference lists are older than the state codes. The bulletins list the 2020 NEC, the 2018 IPC and IFGC, and the 2012 or 2018 IMC. The Board is preparing 2026 NEC questions and plumbing questions are being updated for the 2024 codes, so check the current PSI bulletin for your test date before you buy books.

Try the free questions on any exam page.

Who to contact

Licensing questions: Maryland Department of Labor

Baltimore · (410) 230-6231

labor.maryland.gov licensing (opens in a new tab)

Exam scheduling: PSI

(855) 898-0715 (plumbing: (855) 746-8173)

test-takers.psiexams.com/mdelec (opens in a new tab)