Arizona licensing guide

How to Get a Contractor License in Arizona

Which Arizona ROC license classification you need, the Statutes and Rules Exam (SRE) and the PSI trade exams for general, electrical, plumbing, HVAC, roofing and landscaping contractors.

Arizona exams we cover

General contractors

Electrical

Plumbing

HVAC, refrigeration & gas

Roofing

Landscaping & lawn care

Need more than one exam? Exam packs from $29, or get all 10 Arizona exams for $49.See bundles

Which license do I need?

Find the work you do. In Arizona, the Registrar of Contractors (ROC) licenses contracting businesses by classification, from B general contractors to C-11 electrical, C-37 plumbing and CR-42 roofing. Each license has a qualifying party who passes Arizona's Statutes and Rules Exam (SRE) and, for most classifications, a PSI trade exam. Arizona doesn't license journeyman electricians or plumbers statewide.

If you want to…You needExamsApply
Build or remodel housesB General Residential (or B-3 Remodeling and Repair, CR-61 Carpentry, Remodeling and Repairs)ROC page (opens in a new tab)
Build commercial buildingsB-1 General Commercial (or B-2 Small Commercial, KB-1/KB-2 dual)ROC page (opens in a new tab)
Run an electrical contracting businessC-11 Electrical (commercial), CR-11 (dual) or R-11 (residential)ROC page (opens in a new tab)
Run a plumbing businessC-37 / CR-37 Plumbing, or R-37R (residential; R-37 adds solar)ROC page (opens in a new tab)
Install and service heating, air conditioning and refrigerationC-39, CR-39 or R-39R Air Conditioning and RefrigerationROC page (opens in a new tab)
Install or repair roofsCR-42 Roofing (or C-42 / R-42)ROC page (opens in a new tab)
Install patios, pavers, low walls, irrigation and landscape lightingCR-21 Hardscaping and Irrigation SystemsROC page (opens in a new tab)
Inspect homes for buyers and sellersCertified Home Inspector (Board of Technical Registration)BTR page (opens in a new tab)
Renovate or paint pre-1978 homesEPA Lead-Safe Certified Renovator (federal), plus your ROC licenseEPA page (opens in a new tab)

How an Arizona ROC license works

  1. STEP 1

    Classification

    Pick your ROC license classification and name a qualifying party with the required trade experience.

  2. STEP 2

    SRE

    The qualifying party passes the online Statutes and Rules Exam ($61 through GMetrix, 70% to pass).

  3. STEP 3

    Trade exam

    Pass the PSI trade exam for your classification ($66, open book, 70%). Some classifications have no trade exam.

  4. STEP 4

    Apply

    Send the ROC your application, passing scores, license bond and fees within two years of passing.

The ROC can waive the trade exam if the qualifying party held the same classification in the last five years. Exact requirements are on each exam page.

Watch the code editions

Arizona's PSI trade exams are open book, but they use older code editions: the 2017 NEC for electrical and the 2018 IPC, IMC, IFGC, IRC and IBC for the other trades. A newer code book can lead you to the wrong answer, and every exam has a safety section from OSHA's 29 CFR 1926. Our questions use the editions on PSI's outlines.

Try the free questions on any exam page.

Who to contact

Licensing questions: Arizona ROC

(877) 692-9762

roc.az.gov (opens in a new tab)

Trade exam scheduling: PSI

(855) 744-0310

test-takers.psiexams.com/azcon (opens in a new tab)