Montana licensing guide

How to Get an Electrician or Plumber License in Montana

How Montana trade licensing works: State Electrical Board PSI exams for journeyman, master and residential electricians, Board of Plumbers IAPMO exams for journeyman and master plumbers, fees, experience and next steps.

Montana exams we cover

Electrical

Plumbing

Need more than one exam? Exam packs from $29, or get all 5 Montana exams for $49.See bundles

Which license do I need?

Find the work you do. In Montana the State Electrical Board, part of the Department of Labor and Industry, licenses residential, journeyman and master electricians, and PSI gives the exams. Montana has no state general contractor license; contractors register with the department without an exam.

Plumbers are licensed separately by the Montana Board of Plumbers, with written exams from IAPMO. Montana has journeyman and master plumber licenses only.

If you want to…You needExamsApply
Install, repair and supervise electrical work in any building, and run an electrical businessMaster ElectricianMontana State Electrical Board page (opens in a new tab)
Do electrical work as a licensed journeymanJourneyman ElectricianMontana State Electrical Board page (opens in a new tab)
Do electrical work in residential buildings onlyResidential ElectricianMontana State Electrical Board page (opens in a new tab)
Install, repair and supervise plumbing work and run a plumbing businessMaster PlumberMontana State Electrical Board page (opens in a new tab)
Do plumbing work as a licensed journeymanJourneyman PlumberMontana State Electrical Board page (opens in a new tab)

How a Montana electrician license works

  1. STEP 1

    Apply

    Send the State Electrical Board your application with documentation of your experience.

  2. STEP 2

    Admission letter

    When the Board approves you, it mails or e-mails an admission letter. You can't schedule before then.

  3. STEP 3

    Take the PSI exam

    Pay and schedule with PSI. The exams are open book: 70% to pass for journeyman and residential, 75% for master.

  4. STEP 4

    Get licensed

    After a second failure you need an 8-hour Board-approved code seminar before a third try.

Experience requirements and license fees are set by the Board. Exact exam details are on each exam page.

How a Montana plumber license works

  1. STEP 1

    Apply

    Send the Board of Plumbers your application with documentation of your experience. You need Board approval before you can register.

  2. STEP 2

    Register with IAPMO

    After approval, register with IAPMO. The written exam is online proctored and open book: 70% to pass.

  3. STEP 3

    Practical (journeyman)

    The journeyman license also has a separate practical exam of three virtual diagrams. We don't cover the practical.

  4. STEP 4

    Get licensed

    After three failed written attempts in a year you need 20 hours of continuing education before a fourth.

The Board does not publish a topic outline or weights for the plumbing exams, so ours are estimates. The Board's exam sheets still say the 2021 UPC, while Montana adopted the 2024 UPC effective September 26, 2026 and IAPMO has not confirmed which it tests. Our questions follow the 2024 UPC with the proposed Montana amendments (MAR Notice 2026-95). Confirm the year with IAPMO (certifications@iapmo.org, 708-995-3000) before you buy a book.

Montana Board of Plumbers (opens in a new tab)

Watch the code edition

Montana's PSI electrician exams are open book. The PSI bulletin lists the 2020 NEC and the Montana Building Codes Amendments, but Montana's code list shows the 2023 NEC taking effect September 26, 2026. Check the current bulletin for the edition on your test date.

See the details on the journeyman exam page.

Who to contact

Licensing questions: State Electrical Board

(406) 444-5711

electrician.mt.gov (opens in a new tab)

Exam scheduling: PSI

(855) 746-8173

test-takers.psiexams.com/maseb (opens in a new tab)