Virginia licensing guide

How to Get an Electrician, Plumber, HVAC, Gasfitter or Contractor License in Virginia

How Virginia trade licensing works: DPOR Board for Contractors tradesman exams (PSI, open book) for journeyman and master electrician, plumber and HVAC, residential plumber and HVAC, gasfitter and backflow, plus the Class A/B contractor exam, fees and next steps.

Virginia exams we cover

Electrical

Plumbing

Plumbing

Journeyman/Master Plumber

The PSI exam for Virginia's journeyman and master plumber licenses (one shared exam): 80 open-book questions on drainage, water supply, backflow, storm drainage and the Board's rules, using the 2021 IPC.

80 Q · 210 MIN · 75% TO PASS

Plumbing

Residential Plumber

The PSI exam for Virginia's residential plumber license: 50 open-book questions on drainage, water supply, backflow, storm drainage and the Board's rules using the 2021 IPC. 35 correct to pass.

50 Q · 120 MIN · 70% TO PASS

Plumbing

Journeyman/Master Gasfitter

The PSI exam for Virginia's journeyman and master gasfitter licenses (one shared exam): 50 open-book questions on natural and LP gas piping, pipe sizing, LP-gas tanks, controls, testing and the Board's rules.

50 Q · 150 MIN · 70% TO PASS

Plumbing

LP Gasfitter

The PSI exam for Virginia's LP gasfitter license: 50 open-book questions on natural and LP gas piping, pipe sizing, LP-gas tanks, controls, testing and the Board's rules.

50 Q · 150 MIN · 70% TO PASS

Plumbing

Natural Gasfitter

The PSI exam for Virginia's natural gasfitter license: 50 open-book questions on natural gas piping, pipe sizing, controls, testing and the Board's rules, based on the 2021 IFGC.

50 Q · 150 MIN · 70% TO PASS

Plumbing

Backflow

The PSI exam for Virginia's backflow prevention license: 40 open-book questions on testing and troubleshooting assemblies, devices, maintenance and repair, cross-connection knowledge and the Board's rules. 30 correct to pass.

40 Q · 150 MIN · 75% TO PASS

HVAC, refrigeration & gas

General contractors

Need more than one exam? Exam packs from $29, or get all 11 Virginia exams for $49.See bundles

Which license do I need?

Find the work you do. In Virginia, the Department of Professional and Occupational Regulation (DPOR) Board for Contractors licenses electricians, plumbers and HVAC mechanics as tradesmen (journeyman, master and residential levels) and licenses contractors in Classes A, B and C. PSI gives the exams, and all of them are open book. The Board approves your application before you can register.

Virginia also has elevator mechanic exams and Class C specialty contractor exams; we do not cover those yet. Exam fees may change: a rule effective 3/11/2026 raised the Board's exam fee caps, though DPOR still lists $100 (journeyman) and $125 (master). Confirm the fee with PSI when you register.

Contractor classes (Va. Code 54.1-1100, as amended effective 7/1/2025): Class A is $150,000 or more per project or $1 million or more in 12 months; Class B is $30,000 to under $150,000 per project or $250,000 to under $1 million in 12 months; Class C is over $1,000 to under $30,000 per project or under $250,000 in 12 months.

If you want to…You needExamsApply
Work as a journeyman electricianJourneyman ElectricianDPOR page (opens in a new tab)
Work as a master electricianMaster ElectricianDPOR page (opens in a new tab)
Install or repair plumbing in any buildingJourneyman or Master PlumberDPOR page (opens in a new tab)
Install or repair residential plumbingResidential PlumberDPOR page (opens in a new tab)
Install or service heating, ventilation, air conditioning and refrigerationJourneyman or Master HVACDPOR page (opens in a new tab)
Install or service residential heating and cooling systemsResidential HVACDPOR page (opens in a new tab)
Install or repair gas piping (natural gas, LP gas or both)Gasfitter, LP Gasfitter or Natural GasfitterDPOR page (opens in a new tab)
Test, maintain and repair backflow prevention assembliesBackflow PreventionDPOR page (opens in a new tab)
Run a contracting business (Class A or B)Class A or Class B ContractorDPOR page (opens in a new tab)
Renovate or paint pre-1978 homesEPA Lead-Safe Certified Renovator (federal)EPA page (opens in a new tab)

How a Virginia tradesman license works

  1. STEP 1

    Qualify

    Be 18 and document your training and experience. Journeyman: 8 years alone, or school hours plus 4 to 7 years. Master: 1 year as a journeyman or 9 years.

  2. STEP 2

    Apply

    The Board for Contractors reviews your application and approves you to take the exam.

  3. STEP 3

    PSI exam

    Register and pay PSI. Every exam is open book. Eligibility lasts one year, with unlimited retakes in that year.

  4. STEP 4

    License

    Send your passing result and the fee ($150 original). Trade licenses run three years with 3 hours of continuing education per designation (1 hour for gas fitter, LP gas fitter and natural gas fitter licenses).

Reciprocity and exam exemptions for out-of-state licensees are in 18VAC50-30-50. Exact requirements are on each exam page.

Watch the code editions

Virginia's PSI exams are open book but use specific editions: the 2020 NEC for electrical and the 2021 IPC, IMC and IFGC (the Virginia Plumbing, Mechanical and Fuel Gas Codes) for plumbing, HVAC and gas. That matches the 2021 Virginia USBC now in force. The 2024 cycle (NEC 2023 and the 2024 I-codes) is tentatively scheduled to take effect in October 2027, and PSI will likely update its bulletin then. Ten items on every journeyman and master exam come from the Board's own rules, 18VAC50-30. Check PSI's current bulletin for changes before you test.

Try the free questions on any exam page.

Who to contact

Licensing questions: DPOR Board for Contractors

Richmond · (804) 367-8511

dpor.virginia.gov Board for Contractors (opens in a new tab)

Exam scheduling: PSI

(855) 340-3910

test-takers.psiexams.com/vacon (opens in a new tab)