Ohio licensing guide

How to Get a Contractor License in Ohio

Which Ohio Construction Industry Licensing Board license you need and the PSI exams for commercial electrical, plumbing, HVAC, hydronics and refrigeration contractors, plus the required business and law exam.

Ohio exams we cover

General contractors

Electrical

HVAC, refrigeration & gas

Plumbing

Water & wastewater

Need more than one exam? Exam packs from $29, or get all 10 Ohio exams for $49.See bundles

Which license do I need?

Find the work you do. In Ohio, the Construction Industry Licensing Board (OCILB) licenses contractors in five commercial trades: electrical, plumbing, HVAC, hydronics and refrigeration. Each license has a qualifying individual who passes the Business and Law exam and the PSI trade exam. Ohio has no state license for general contractors, and residential work is licensed locally.

Operators are licensed separately: Ohio EPA certifies water and wastewater plant operators (WPI exams at PSI), the Division of Industrial Compliance licenses boiler operators (PSI exams), and home inspectors take the national NHIE for a license from the Ohio Department of Commerce.

If you want to…You needExamsApply
Run a commercial electrical contracting businessElectrical ContractorOCILB page (opens in a new tab)
Run a commercial plumbing businessPlumbing ContractorOCILB page (opens in a new tab)
Install heating, ventilation, air conditioning and ductwork in commercial buildingsHVAC ContractorOCILB page (opens in a new tab)
Install or service steam, hot-water heating or chilled-water systems and boilersHydronics ContractorOCILB page (opens in a new tab)
Install or service commercial refrigeration for food and product preservationRefrigeration ContractorOCILB page (opens in a new tab)
Operate a public drinking water treatment plantWater Supply Class I Operator (Ohio EPA)Ohio EPA page (opens in a new tab)
Operate a wastewater treatment plantWater Reclamation (Wastewater) Class I Operator (Ohio EPA)Ohio EPA page (opens in a new tab)
Operate a steam boiler of 15 psi or less with more than 360 sq ft of heating surfaceLow-Pressure Boiler OperatorIndustrial Compliance page (opens in a new tab)
Operate a steam boiler over 15 psi with more than 360 sq ft of heating surfaceHigh-Pressure Boiler OperatorIndustrial Compliance page (opens in a new tab)
Inspect homes for a feeHome InspectorOhio Commerce page (opens in a new tab)
Renovate or paint pre-1978 homesEPA Lead-Safe Certified Renovator (federal)EPA page (opens in a new tab)

How an Ohio contractor license works

  1. STEP 1

    Qualify

    Be 18, a U.S. citizen or legal resident, with 5 years as a tradesperson in the trade (3 years of business experience for registered engineers).

  2. STEP 2

    Apply

    Send the OCILB your exam application. After approval, get a state and federal background check before you test.

  3. STEP 3

    Two exams

    Pass the Business and Law exam and your PSI trade exam, both 70% and open book. Business and Law is good for three years.

  4. STEP 4

    Insure

    Send your results, the license fee and proof of contractor's liability insurance. Licenses renew yearly with 10 hours of continuing education.

The OCILB can license out-of-state contractors without an exam under a reciprocity agreement. Exact requirements are on each exam page.

Watch the code editions

Ohio's PSI trade exams are open book, but they use specific editions: the 2023 NEC for electrical, the 2024 Ohio Plumbing Code (2021 IPC with Ohio amendments) for plumbing, and the 2024 Ohio Mechanical Code (2021 IMC with Ohio amendments) for HVAC, hydronics and refrigeration. Our questions use the editions and Ohio amendments on PSI's outlines.

Try the free questions on any exam page.

Who to contact

Licensing questions: OCILB

Reynoldsburg · (614) 644-3493

com.ohio.gov OCILB (opens in a new tab)

Exam scheduling: PSI

(855) 257-1621

test-takers.psiexams.com/ohconst (opens in a new tab)