Georgia licensing exam

Georgia Journeyman Plumber Exam: Practice Test & Licensing Guide

The PSI exam for Georgia's statewide journeyman plumber license: 100 questions on plumbing installation, testing, repair and safety under the 2024 Georgia plumbing and gas codes. Open book, 70 to pass.

Questions
100
Time limit
5 hours
Passing score
70%

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10General Laws

What is the minimum amount of plumbing experience an applicant must document to qualify for the Georgia statewide Journeyman Plumber examination?

Requirements at a glance

AgencyGeorgia Construction Industry Licensing Board (Division of Master and Journeyman Plumbers); exams by PSI
Experience1 year of plumbing experience; 3 references from licensed plumbers
Exam100 questions, 5 hours in two 2.5-hour parts, open book, 70 to pass
Books allowed2024 Georgia Plumbing Code and Gas Code, Mathematics for Plumbers and Pipefitters 8th Edition, Plumbing Technology 4th Edition, ADA Standards (2010), GA 811 Excavator Manual (2025), the NASCLA Georgia guide and IRS Circular E
Fees$40 application fee ($30 plus a $10 processing fee) per the Secretary of State form. The PSI exam fee and license fee are not published in the candidate bulletin; confirm them with PSI and the Board.

Plumbers applying for a Georgia journeyman plumber license from the Construction Industry Licensing Board. Applicants need 1 year of experience and 3 references from licensed plumbers.

How to get licensed, step by step

  1. Apply to the Board

    Submit the application, three references on the Board's form and the $40 fee to the Construction Industry Licensing Board (Macon; (404) 424-9966). The Board must approve you before you can register with PSI.

    Georgia Division of Master and Journeyman Plumbers (CILB) (opens in a new tab)Georgia Rules 121-3 (CILB license requirements) (opens in a new tab)

  2. Register with PSI

    After approval, register and pay PSI online or at 855-898-0711. Bring the allowed references and a silent, non-programmable calculator.

    Schedule with PSI (Georgia CILB exams) (opens in a new tab)PSI bulletin: Georgia plumbers (opens in a new tab)

  3. Take the exam

    Scaled score, 70 to pass. If you fail twice, the PSI bulletin requires a Board-approved review course before a third attempt.

    PSI bulletin: Georgia plumbers (opens in a new tab)

  4. Finish licensing

    Send your results and the license fee to the Board.

    Georgia Division of Master and Journeyman Plumbers (CILB) (opens in a new tab)

How to prepare

  • Georgia's exams are scaled with 70 to pass. The Board's 2026 reference lists apply to exams through December 31, 2026; check for the updated list if you test later.
  • Tab your books with permanent tabs before exam day. Highlighting and underlining are allowed; notes, sticky flags and loose papers are not.
  • Installation (21) is the biggest section, followed by regulations, maintenance and repair, and safety (15 each). Tab IPC Chapters 3 through 9.
  • The journeyman exam is the only Georgia plumbing exam that is open book.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

Books for this exam

This is an open-book exam: you can bring the references below, and most questions come from the Georgia Plumbing Code and the Georgia Gas Code. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.

Official reference list (as published by the testing agency)
  • 2024 Georgia Plumbing Code (2024 International Plumbing Code with Georgia amendments)
  • 2024 Georgia Gas Code (2024 International Fuel Gas Code with Georgia amendments)
  • Mathematics for Plumbers and Pipefitters, 8th Edition (Lee Smith)
  • Plumbing Technology, Design and Installation, 4th Edition (Smith and Joyce)
  • Contractors Guide to Business, Law, and Project Management, Georgia Construction Industry Licensing Board, 5th Edition (NASCLA)
  • ADA Standards for Accessible Design (2010), GA 811 Excavator Manual (2025) and IRS Employer's Tax Guide

What's on the exam

Official content outline from PSI Services (number of questions per topic):

TopicQuestions
General Laws5
Regulations15
Work Planning7
Pipe Cutting and Joining10
Installation21
System Testing7
Maintenance and Repair15
Safety15
Calculations5

Exam day details

  • Administered by PSI Services for the Georgia Construction Industry Licensing Board.
  • Fee: The Board's initial application fee is $40 ($30 plus a $10 processing fee). The PSI exam fee and the license fee are not published in the candidate bulletin, so check PSI and the Board before you apply.
  • 100 scored questions plus 20 unscored pretest questions in 5 hours, split into two 2.5-hour parts.
  • The journeyman exam is open book: you may use the references on the Board's list (for exams through December 31, 2026). Highlighting and permanent tabs are allowed; notes and extra papers are not.
  • Since May 1, 2026 the code questions are based only on the 2024 Georgia Plumbing Code and Gas Code.
  • The Board must approve your application before you can register with PSI. Scores are scaled and you need 70 to pass.
  • The time limit includes the unscored beta (pretest) questions mixed into the exam.
  • If you fail twice, the PSI bulletin requires a Board-approved review course before a third attempt.
  • Georgia has no statewide journeyman or master electrician exam and no statewide HVAC technician exam; local jurisdictions license those workers.

Frequently asked questions

What's on the Georgia journeyman plumber exam?

100 scored questions: installation 21, regulations 15, maintenance and repair 15, safety 15, pipe cutting and joining 10, work planning 7, system testing 7, general laws 5 and calculations 5.

Is the Georgia journeyman plumber exam open book?

Yes, with the references on the Board's list. The master plumber exams are closed book.

Which plumbing code does it use?

The 2024 Georgia Plumbing Code (2024 IPC with Georgia amendments) and the 2024 Georgia Gas Code (2024 IFGC with Georgia amendments).

Free questions with answers

Show all 10 free questions and answers
  1. What is the minimum amount of plumbing experience an applicant must document to qualify for the Georgia statewide Journeyman Plumber examination?

    Answer: One year of experience in plumbing work covered by the Georgia State Plumbing Code

    Rule 121-3-.02(5) requires a minimum of one year of experience in plumbing work covered by the Georgia State Plumbing Code, and the experience may be primary or secondary. The two- and five-year figures are master plumber requirements (five years with two as a journeyman).

    Reference: Ga. Comp. R. & Regs., Rule 121-3-.02(5)

  2. Under Section 300.1 of the Georgia Plumbing Code, which code regulates fuel gas piping and fuel-gas-fired water heaters and their venting systems?

    Answer: The International Fuel Gas Code as adopted in Georgia

    Section 300.1 states that fuel gas distribution piping and equipment, fuel-gas-fired water heaters and water heater venting systems are regulated by the International Fuel Gas Code. A plumber installing a gas water heater therefore turns to the Georgia Gas Code, not IPC Chapter 5, for gas piping and venting.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Section 300.1

  3. The nameplate on a storage water heater shows a heat input of 76,000 Btu/h. The relieving capacity of its temperature relief valve must be at least:

    Answer: Equal to or greater than the 76,000 Btu/h heat input

    Section 504.5 requires the relieving capacity of each pressure relief valve and each temperature relief valve to equal or exceed the heat input to the water heater or storage tank. The input in Btu/h is read from the nameplate when planning the valve.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Section 504.5

  4. When making a solvent-cemented joint in ABS or PVC drain piping, the Georgia Plumbing Code requires the joint surfaces to be clean and free from moisture and the joint to be made:

    Answer: While the cement is still wet

    Section 705.2.2 (ABS) and Section 705.10.2 (PVC) both require clean joint surfaces free from moisture, cement applied to all joint surfaces, and the joint made while the cement is wet. Letting the cement dry or tack up produces a poor joint, and heating the fitting damages the plastic.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Sections 705.2.2 and 705.10.2

  5. What is the minimum slope for a horizontal 4-inch building drain under Table 704.1 when it is not upstream of a grease interceptor?

    Answer: 1/8 inch per foot

    Table 704.1 requires 1/4 inch per foot for pipe 2-1/2 inches and smaller, 1/8 inch per foot for 3- to 6-inch pipe, and 1/16 inch per foot for 8-inch and larger. A 4-inch line falls in the 3-to-6-inch range.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Table 704.1

  6. A 4-inch kitchen waste line is being installed upstream of a grease interceptor. What minimum slope applies to it?

    Answer: 1/4 inch per foot

    Section 704.1 overrides Table 704.1 for drainage piping upstream of a grease interceptor, requiring a slope of not less than 1/4 inch per foot (2 percent). The table value of 1/8 inch per foot would apply to a 4-inch line elsewhere.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Section 704.1

  7. A drainage and vent system built of PVC is ready for testing. Which test method does Section 312 of the Georgia Plumbing Code NOT permit for this system?

    Answer: An air test

    Section 312.3 states plastic piping shall not be tested using air. A water test (Section 312.2) is allowed, and Section 312.4 allows a vacuum test at negative 5 psi held 15 minutes. Cast iron or copper systems may be air tested at 5 psi for 15 minutes.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Sections 312.2 through 312.4

  8. During a gas piping pressure test, the gauge drops slowly. How does the Georgia Gas Code treat the drop?

    Answer: As a leak, unless the reduction can be readily attributed to another cause

    IFGC Section 406.5 says any reduction of test pressure shown by the gauge shall be deemed to indicate a leak unless the reduction can be readily attributed to some other cause, such as a temperature change. The leak must then be located and the repair retested under 406.5.2.

    Reference: 2024 Georgia Gas Code (IFGC 2024 with Georgia amendments), Section 406.5

  9. A 45-degree offset has a set (offset) of 18 inches. What is the travel (pipe length between fitting centers) using the 1.414 constant?

    Answer: 25.5 inches

    For equal 45-degree fittings the travel is the set multiplied by 1.414 (the hypotenuse of a 45-45-90 triangle): 18 x 1.414 = 25.45, or about 25.5 inches. Dividing by 1.414 gives 12.7; 36 is twice the set.

    Reference: Plumbing mathematics, Offsets: travel = set x 1.414 for a 45-degree offset

  10. What backflow protection does the code require on the potable water supply to a boiler where no chemicals are introduced?

    Answer: A backflow preventer with an intermediate atmospheric vent

    Section 608.17.2 requires the potable supply to a boiler to be equipped with a backflow preventer with an intermediate atmospheric vent (ASSE 1012, ASSE 1081 or CSA B64.3). Where conditioning chemicals are introduced, an air gap or reduced pressure principle backflow preventer is required.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Section 608.17.2

Sources

Questions last verified November 14, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.