Georgia licensing exam

Georgia Master Plumber Class I (Restricted) Exam: Practice Test & Licensing Guide

The PSI exam for Georgia's restricted (Class I) master plumber license: 120 questions on plumbing technical work, business law and system design under the 2024 Georgia plumbing and gas codes. Closed book, 70 to pass.

Questions
120
Time limit
7 hours
Passing score
70%
Books
Closed book
What to study ↓

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10Installation

A 2-inch kitchen waste line runs to a grease interceptor in a restaurant. What minimum slope applies to the piping upstream of the interceptor?

Requirements at a glance

AgencyGeorgia Construction Industry Licensing Board (Division of Master and Journeyman Plumbers); exams by PSI
Experience5 years of plumbing experience, at least 2 of them as a licensed journeyman; at least 1 of the 3 references from a licensed master plumber (Class I). The license is limited to single-family and one-level two-family dwellings and commercial structures up to 10,000 square feet.
Exam120 questions, 7 hours, CLOSED book, 70 to pass
Books allowedNone: the master plumber exams are closed book. Study the 2024 Georgia Plumbing Code and Gas Code, the NASCLA Georgia guide, Mathematics for Plumbers and Pipefitters and Plumbing Technology
Fees$40 application fee ($30 plus a $10 processing fee) per the Secretary of State form. The PSI exam fee and license fee are not published in the candidate bulletin; confirm them with PSI and the Board.

Plumbers applying for a restricted Georgia master plumber license from the Construction Industry Licensing Board: single-family dwellings, one-level dwellings for not more than two families, and commercial structures up to 10,000 square feet.

How to get licensed, step by step

  1. Apply to the Board

    Submit the application, three references on the Board's form and the $40 fee to the Construction Industry Licensing Board (Macon; (404) 424-9966). The Board must approve you before you can register with PSI.

    Georgia Division of Master and Journeyman Plumbers (CILB) (opens in a new tab)Georgia Rules 121-3 (CILB license requirements) (opens in a new tab)

  2. Register with PSI

    After approval, register and pay PSI online or at 855-898-0711. Bring the allowed references and a silent, non-programmable calculator.

    Schedule with PSI (Georgia CILB exams) (opens in a new tab)PSI bulletin: Georgia plumbers (opens in a new tab)

  3. Take the exam

    Scaled score, 70 to pass. If you fail twice, the PSI bulletin requires a Board-approved review course before a third attempt.

    PSI bulletin: Georgia plumbers (opens in a new tab)

  4. Finish licensing

    Send your results and the license fee to the Board.

    Georgia Division of Master and Journeyman Plumbers (CILB) (opens in a new tab)

How to prepare

  • Georgia's exams are scaled with 70 to pass. The Board's 2026 reference lists apply to exams through December 31, 2026; check for the updated list if you test later.
  • Tab your books with permanent tabs before exam day. Highlighting and underlining are allowed; notes, sticky flags and loose papers are not.
  • Regulations (15) and installation (16) lead the technical section; 40 more questions cover business laws, administrative requirements and plumbing system design.
  • Closed book: practice sizing drains, vents and water supply from memory of the code tables.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

What to study

This is a closed-book exam, so nothing comes into the exam room. Study from these:

Official reference list (as published by the testing agency)
  • 2024 Georgia Plumbing Code (2024 International Plumbing Code with Georgia amendments)
  • 2024 Georgia Gas Code (2024 International Fuel Gas Code with Georgia amendments)
  • Mathematics for Plumbers and Pipefitters, 8th Edition (Lee Smith)
  • Plumbing Technology, Design and Installation, 4th Edition (Smith and Joyce)
  • Contractors Guide to Business, Law, and Project Management, Georgia Construction Industry Licensing Board, 5th Edition (NASCLA)
  • ADA Standards for Accessible Design (2010), GA 811 Excavator Manual (2025), IRS Employer's Tax Guide and 29 CFR Part 1926 (OSHA)

What's on the exam

Official content outline from PSI Services (number of questions per topic):

TopicQuestions
General Laws5
Regulations15
Work Planning8
Pipe Cutting and Joining4
Installation16
System Testing5
Maintenance and Repair11
Safety11
Calculations5
Business Laws15
Administrative Requirements15
Plumbing System Design10

Exam day details

  • Administered by PSI Services for the Georgia Construction Industry Licensing Board.
  • Fee: The Board's initial application fee is $40 ($30 plus a $10 processing fee). The PSI exam fee and the license fee are not published in the candidate bulletin, so check PSI and the Board before you apply.
  • 120 scored questions plus 24 unscored pretest questions in 7 hours.
  • Closed book: the Board's reference list is for study only and references may not be used on the master plumber exams.
  • Since May 1, 2026 the code questions are based only on the 2024 Georgia Plumbing Code and Gas Code. The exam adds 40 questions on business laws, administrative requirements and plumbing system design.
  • The Board must approve your application before you can register with PSI. Scores are scaled and you need 70 to pass.
  • The time limit includes the unscored beta (pretest) questions mixed into the exam.
  • If you fail twice, the PSI bulletin requires a Board-approved review course before a third attempt.
  • Georgia has no statewide journeyman or master electrician exam and no statewide HVAC technician exam; local jurisdictions license those workers.

Frequently asked questions

What's on the Georgia Class I master plumber exam?

120 scored questions: 80 technical (regulations 15, installation 16, maintenance and repair 11, safety 11, work planning 8, system testing 5, general laws 5, calculations 5, pipe cutting and joining 4) plus 40 on business laws 15, administrative requirements 15 and plumbing system design 10.

What can a Class I master plumber do in Georgia?

Restricted work: single-family dwellings, one-level dwellings for not more than two families, and commercial structures of up to 10,000 square feet. Class II is unrestricted.

Is the exam open book?

No. The master plumber exams are closed book.

Free questions with answers

Show all 10 free questions and answers
  1. A 2-inch kitchen waste line runs to a grease interceptor in a restaurant. What minimum slope applies to the piping upstream of the interceptor?

    Answer: 1/4 inch per foot (2 percent)

    Section 704.1 requires piping upstream of a grease interceptor to slope at least 1/4 inch per foot regardless of size. Using 1/8 inch per foot would ignore this special rule.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Section 704.1

  2. How often must testable backflow prevention assemblies be tested after the initial test at installation?

    Answer: At least annually, and after any repair or relocation

    Section 312.11.2 requires reduced pressure, double check and pressure vacuum breaker assemblies (among others) to be tested at installation, immediately after repairs or relocation, and at least annually. Annual inspections of air gaps are required by 312.11.1.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Section 312.11.2

  3. A pipe-applied atmospheric vacuum breaker protects a hose-bibb type outlet. How high above the flood level rim of the fixture must it be installed?

    Answer: At least 6 inches

    Section 608.16.4 sets the critical level of a pipe-applied vacuum breaker at not less than 6 inches above the flood level rim. Pressure vacuum breakers under 608.14.5 need 12 inches above downstream piping and outlets.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Section 608.16.4

  4. Under the Georgia plumbing code, which code governs fuel gas piping and gas-fired water heaters and their venting?

    Answer: The International Fuel Gas Code as adopted in Georgia

    Section 300.1 states that fuel gas distribution piping and equipment, fuel-gas-fired water heaters and water heater venting are regulated by the International Fuel Gas Code. The plumbing code covers the water side of the heater.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Section 300.1

  5. Under the 2010 ADA Standards, what is the maximum height of the front of a lavatory rim or counter above the finish floor?

    Answer: 34 inches

    ADA Section 606.3 limits the front of lavatory rims and counter surfaces to 34 inches maximum above the finish floor. Water closet centerlines are 16 to 18 inches from the side wall (604.2).

    Reference: 2010 ADA Standards for Accessible Design, Section 606.3

  6. On a drawing at a scale of 1/4 inch = 1 foot, a pipe run measures 5-1/2 inches. What is the actual length of the run?

    Answer: 22 feet

    Each 1/4 inch on the drawing equals 1 foot, so 5.5 inches / 0.25 inch = 22 feet. Dividing by 0.5 gives 11 feet and multiplying by 8 gives 44 feet, both from using the wrong scale.

    Reference: General plumbing practice, Reading plans: architectural scale

  7. What must a drain valve at the bottom of a tank-type water heater provide?

    Answer: A 3/4-inch minimum inlet and an outlet with male garden hose threads

    Section 501.3 requires drain valves at the bottom of each tank-type heater and storage tank, with an inlet of not less than 3/4-inch nominal iron pipe size and an outlet with male garden hose threads so the tank can be flushed.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Section 501.3

  8. A plumber is paid $1,500 gross for a week. Using the standard Social Security (6.2%) and Medicare (1.45%) rates, what is the total FICA tax for the week, employee share plus employer share?

    Answer: $229.50

    Each side pays 6.2% + 1.45% = 7.65%. $1,500 x 0.0765 = $114.75 per side, so employee plus employer = $229.50. $114.75 is the employee share only, and $186.00 leaves out Medicare.

    Reference: IRS Publication 15 (Employer's Tax Guide), Social Security and Medicare taxes

  9. A job costs the contractor $10,000. To earn a 20 percent gross margin on the selling price, what must the bid price be?

    Answer: $12,500

    Price = cost / (1 - margin) = $10,000 / 0.80 = $12,500. Adding 20% to cost gives $12,000, which is only a 16.7% margin on the price. $8,000 subtracts the margin from cost, and $10,200 adds only 2 percent.

    Reference: General business practice, Job cost estimating: margin versus markup

  10. Under Table 506 of the Georgia plumbing code, what minimum first hour rating (FHR) is required for a water heater serving a house with 3 bedrooms and 2 bathrooms?

    Answer: 60 gallons

    Table 506 lists, for 2 to 2-1/2 baths, an FHR of 47 gallons for 2 bedrooms, 60 for 3 bedrooms, 62 for 4 bedrooms and 70 for 5 bedrooms. The 48-gallon value is for 3 bedrooms with only 1 to 1-1/2 baths.

    Reference: 2024 Georgia Plumbing Code (IPC 2024 with Georgia amendments), Table 506

Sources

Questions last verified November 14, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.