North Carolina licensing exam

North Carolina General Contractor Business and Law Exam: Practice Test & Licensing Guide

The PSI Business and Law exam for North Carolina general contractor licenses: 40 open-book questions, mostly licensing law, plus liens and bonds, One Call, subcontractor payment and erosion control. 70% to pass.

Questions
40
Time limit
90 min
Passing score
70%

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10Licensing

A homebuilder is asked to bid a project with a total cost of undertaking of $38,000 and then another project at $40,000. Under G.S. 87-1(a), at what cost does a person who bids or builds become a "general contractor" required to be licensed?

Requirements at a glance

Who takes itGeneral contractor applicants through the NC Licensing Board for General Contractors
Format40 questions, 90 minutes, open book, 70% (28) to pass
Books allowedNASCLA NC General Contractors Edition (10th), NC Excavation Safety Guidelines (2022 or later), 15A NCAC 4, G.S. 113A Article 4
Fee$79 to PSI

General contractor license applicants through the NC Licensing Board for General Contractors.

How to get licensed, step by step

  1. Get approved

    Apply to the NCLBGC; the eligibility letter covers one exam within 120 days.

    NC Licensing Board for General Contractors (NCLBGC) (opens in a new tab)

  2. Study licensing

    Licensing is 21 of 40 questions. Know G.S. 87-1 and 87-10 and the NASCLA licensing chapters.

    NC Licensing Board for General Contractors (NCLBGC) (opens in a new tab)

  3. Schedule with PSI

    Book at PSI online or at 855-746-8173.

    Schedule with PSI (NC general contractors) (opens in a new tab)

How to prepare

  • Licensing (21) is more than half the exam. Know the $40,000 threshold, classifications and limitations.
  • Liens and bonds (8) and One Call (5): learn the notice periods and the excavation rules in the NC 811 guidelines.
  • Tab your books with permanent tabs before exam day. Highlighting is allowed; writing, sticky flags and loose papers are not.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

Books for this exam

This is an open-book exam: you can bring the references below, and most questions come from the NASCLA NC guide. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.

Official reference list (as published by the testing agency)
  • Contractor's Guide to Business, Law and Project Management, North Carolina General Contractors Edition, 10th Edition (NASCLA)
  • North Carolina Excavation Safety Guidelines, 2022 or later (NC 811)
  • North Carolina Administrative Code, Title 15A, Chapter 4 (Sedimentation Control), with latest amendments
  • N.C. General Statutes Chapter 113A, Article 4 (Sedimentation Pollution Control Act of 1973), G.S. 113A-50 to 113A-67

What's on the exam

Official content outline from PSI Services (number of questions per topic):

TopicQuestions
Erosion and Sedimentation Control3
Licensing21
Subcontractor's Pay Requirements3
Liens and Bonds8
One Call5

Exam day details

  • Administered by PSI Services for the NC Licensing Board for General Contractors.
  • Fee: $79 per exam to PSI, nonrefundable. NCLBGC application and license fees are separate.
  • 40 questions in 90 minutes; 28 correct (70%) to pass.
  • Licensing is more than half of the exam. Licensing questions come from the NASCLA guide and Chapter 87 of the General Statutes (G.S. 87-1 and 87-10 on the license requirement, classifications and limitations).
  • A general contractor license is required to bid or build any project of $40,000 or more. Limited licenses cover projects up to $750,000, Intermediate up to $1,500,000 and Unlimited has no cap.
  • Open book: bring your own bound copies of the allowed references. You may highlight, underline and index them with permanent tabs, but not write in them. Sticky flags are not allowed. Code books are the only references that may be copied and bound.
  • PSI may add 5 to 10 unscored experimental questions. Their time does not count against your exam time.
  • The Board approves your application first and sends an eligibility letter with your state ID number. The letter is good for 120 days and one exam; a no-show counts as an attempt.
  • If you fail, you may retake as many times as you like within 12 months as long as the information in your application stays valid. Each attempt costs the exam fee.
  • A silent, non-printing, non-programmable calculator is allowed.

Frequently asked questions

What's on the North Carolina GC business and law exam?

40 questions: licensing 21, liens and bonds 8, One Call 5, erosion and sedimentation control 3 and subcontractor's pay requirements 3.

Which books are allowed?

The NASCLA NC General Contractors Edition guide (10th), the NC Excavation Safety Guidelines (2022 or later), 15A NCAC Chapter 4 and G.S. 113A Article 4.

At what project size do I need a general contractor license?

At $40,000 or more (G.S. 87-1), with exceptions such as an owner building a home for their own occupancy.

Free questions with answers

Show all 10 free questions and answers
  1. A homebuilder is asked to bid a project with a total cost of undertaking of $38,000 and then another project at $40,000. Under G.S. 87-1(a), at what cost does a person who bids or builds become a "general contractor" required to be licensed?

    Answer: $40,000 or more

    G.S. 87-1(a) defines a general contractor as one who, for a fixed price, commission, fee or wage, bids on or constructs (or superintends or manages) a building, highway, public utility, grading or other improvement where the cost of the undertaking is $40,000 or more. The $38,000 job falls below the threshold; the $40,000 job meets it.

    Reference: N.C. General Statutes Chapter 87, Article 1, G.S. 87-1(a)

  2. Under G.S. 87-10(a1), what is the largest single project a holder of a Limited general contractor license may undertake?

    Answer: A single project with a value of up to $750,000

    G.S. 87-10(a1) sets the limitations: Limited up to $750,000 per project, Intermediate up to $1,500,000, and Unlimited with no restriction. The value excludes the cost of land and any ancillary costs to improve the land.

    Reference: N.C. General Statutes Chapter 87, Article 1, G.S. 87-10(a1)

  3. A landowner builds a house on her own lot for her family to live in. Under G.S. 87-1(b)(2), if the building is not occupied solely by the owner and her family for at least how long after completion, is it presumed that she did not intend it solely for her own occupancy?

    Answer: 12 months

    G.S. 87-1(b)(2) exempts an owner who builds on her own land for her own occupancy if she also complies with G.S. 87-14. If the building is not occupied solely by the owner and her family (or firm or corporation) for at least 12 months following completion, it is presumed the owner did not intend the building solely for her own occupancy.

    Reference: N.C. General Statutes Chapter 87, Article 1, G.S. 87-1(b)(2)

  4. Under G.S. 44A-12(b), a claim of lien on real property must be filed no later than how many days after the claimant last furnished labor or materials at the site?

    Answer: 120 days

    G.S. 44A-12(b): claims of lien on real property may be filed at any time after the obligation matures but not later than 120 days after the last furnishing of labor or materials at the site by the person claiming the lien. The 180-day figure is the deadline to start the enforcement action under G.S. 44A-13(a).

    Reference: N.C. General Statutes Chapter 44A, Article 2, G.S. 44A-12(b)

  5. What two steps perfect a claim of lien on real property under G.S. 44A-11(a)?

    Answer: Serving a copy on the record owner and filing the claim with the clerk of superior court

    G.S. 44A-11(a) says a claim of lien on real property is perfected, effective as of the time in G.S. 44A-10, on service of a copy upon the record owner (and, for a subrogation claim under G.S. 44A-23, upon the contractor through whom subrogation is asserted) and filing of the claim under G.S. 44A-12.

    Reference: N.C. General Statutes Chapter 44A, Article 2, G.S. 44A-11(a)

  6. A public owner pays a prime contractor's final payment 60 days after the project was accepted, with no agreement for a lower rate. What interest rate applies to the unpaid balance under G.S. 143-134.1(a)?

    Answer: One percent per month or fraction thereof, beginning on the 46th day

    If final payment to a prime contractor is delayed by more than 45 days, G.S. 143-134.1(a) requires interest beginning on the 46th day at 1 percent per month or fraction thereof on the unpaid balance, unless a lower rate is agreed. The same rate applies to unpaid periodic payments from the date they are due.

    Reference: N.C. General Statutes Chapter 143, Article 8, G.S. 143-134.1(a)

  7. Under G.S. 113A-57(4), an erosion and sedimentation control plan must be filed and approved before beginning land-disturbing activity that will disturb more than what area on a tract?

    Answer: More than one acre

    G.S. 113A-57(3) and (4) apply to land-disturbing activity that will disturb more than one acre on a tract: the person must install devices sufficient to retain sediment within the tract's boundaries and may not begin until a plan has been filed with, and approved by, the agency having jurisdiction.

    Reference: N.C. General Statutes Chapter 113A, Article 4 (Sedimentation Pollution Control Act of 1973), G.S. 113A-57(3) and (4)

  8. Which activity is listed in G.S. 113A-52.01 as outside the Sedimentation Pollution Control Act?

    Answer: Growing crops, dairy, livestock and other agricultural production on agricultural land

    G.S. 113A-52.01 says the Article does not apply to agricultural activities undertaken on agricultural land for the production of plants and animals, certain forestland timber activities following Forest Practice Guidelines, activities under a Mining Act permit, certain emergency life-protection activities and certain wetland restoration. Commercial and residential development is covered.

    Reference: N.C. General Statutes Chapter 113A, Article 4 (Sedimentation Pollution Control Act of 1973), G.S. 113A-52.01(1)

  9. An excavator's notice to the Notification Center expires 28 calendar days after the work start date. What must the excavator do to continue excavating after that period under G.S. 87-122(a)?

    Answer: Give a subsequent notice in the same manner as the original

    G.S. 87-122(a): notice expires 28 calendar days after the work start date, and no excavation or demolition may continue after that period unless the responsible person gives a subsequent notice in the same manner as the original. The area of locate is also limited to what the excavator reasonably believes can be completed within 28 days (G.S. 87-122(b)(5)).

    Reference: N.C. General Statutes Chapter 87, Article 8A (Underground Utility Safety and Damage Prevention Act), G.S. 87-122(a)

  10. An operator has marked the center line of an underground water main known to be 8 inches in diameter. Under the definition of "tolerance zone" in G.S. 87-117(22), how far on each side of the center line does the zone extend?

    Answer: 28 inches (half the 8-inch diameter, 4 inches, plus 24 inches)

    G.S. 87-117(22) defines the tolerance zone, when the facility diameter is known, as one-half of the known diameter plus 24 inches on either side of the designated center line. Here 8 / 2 = 4 inches, and 4 + 24 = 28 inches on each side. Using 24 inches ignores the half-diameter, and using the full diameter (32) double counts it.

    Reference: N.C. General Statutes Chapter 87, Article 8A (Underground Utility Safety and Damage Prevention Act), G.S. 87-117(22)

Sources

Questions last verified November 14, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.