Requirements at a glance
| Agency | NC Licensing Board for General Contractors (NCLBGC); exams by PSI |
|---|---|
| When you need a license | Projects of $40,000 or more (G.S. 87-1). Limited up to $750,000, Intermediate up to $1,500,000, Unlimited no cap. |
| Exam | Residential Contractor exam, 90 questions in 210 minutes, open book, 70% to pass |
| Books allowed | 2018 NC Residential Code, 2018 NC Administrative Code and Policies, NASCLA NC guide (10th), NC OSHA construction standards |
| Fees | $79 per PSI exam, plus the Board's application and license fees |
Anyone qualifying a Residential general contractor license from the NC Licensing Board for General Contractors (projects of $40,000 or more).
Official links
How to get licensed, step by step
Apply to the Board
Send the license application or examination request form to the NCLBGC (5400 Creedmoor Road, Raleigh; 919-571-4183). Applicants must be 18 with good moral character and financial responsibility.
NC Licensing Board for General Contractors (NCLBGC) (opens in a new tab)
Get your eligibility letter
The Board approves you and sends an eligibility letter with your state ID number. It is good for 120 days and one exam.
Schedule with PSI (NC general contractors) (opens in a new tab)
Schedule with PSI
Book and pay ($79) at PSI online or at 855-746-8173. If you fail you can retake as often as you like within 12 months while your application stays valid.
Schedule with PSI (NC general contractors) (opens in a new tab)
Finish licensing
After you pass, the Board completes your license. A classification (Building, Residential, Highway, Public Utilities or Specialty) and a limitation (Limited, Intermediate, Unlimited) go on it.
NC Licensing Board for General Contractors (NCLBGC) (opens in a new tab)
How to prepare
- North Carolina's exams use the 2018 NC State Building Code (2015 ICC base text with NC amendments, effective 2019). The 2024 NC codes are delayed to no earlier than May 1, 2027, so use the 2018 books.
- Tab your books with permanent tabs before exam day. Highlighting is allowed; writing, sticky flags and loose papers are not.
- Estimating, plan reading and residential code requirements (16) and footings and foundations (12) lead the blueprint: tab the foundation, framing and wall bracing chapters of the NC Residential Code.
- Know the wind and coastal provisions and erosion and sedimentation control (6 together).
- Start with the free questions above to find your weak topics, then drill those first.
- Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
- Read every explanation, including for questions you got right, and look the section up in your own book.
Books for this exam
This is an open-book exam: you can bring the references below, and most questions come from the 2018 NC Residential Code and the NASCLA NC guide. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.
2018 North Carolina State Building Code: Residential CodeEssential
Allowed in the exam room. The 2015 IRC with NC amendments; the base of the Residential exam.
2018 North Carolina State Building Code: Administrative Code and Policies
Allowed in the exam room for the general contractor, plumbing and heating exams.
Contractor's Guide to Business, Law and Project Management, North Carolina General Contractors Edition, 10th Edition (NASCLA)Essential
Allowed in the exam room. Most business, law and licensing questions are written from it.
NASCLA store: Maryland Home Improvement Commission edition (opens in a new tab)
North Carolina Occupational Safety and Health Standards for the Construction Industry
Allowed in the exam room for the Building and Residential exams. Source of the safety questions.
Official reference list (as published by the testing agency)
- North Carolina State Building Code: Residential Code, 2018 (2015 IRC with NC amendments)
- North Carolina State Building Code: Administrative Code and Policies, 2018
- Contractor's Guide to Business, Law and Project Management, North Carolina General Contractors Edition, 10th Edition (NASCLA)
- North Carolina Occupational Safety and Health Standards for the Construction Industry, with latest amendments
What's on the exam
Official content outline from PSI Services (number of questions per topic):
| Topic | Questions | |
|---|---|---|
| Site Work, Footings and Foundations | 12 | |
| Concrete and Concrete Reinforcement | 10 | |
| Masonry | 7 | |
| Carpentry | 11 | |
| Associated Construction Trades, including Energy Conservation and Drywall | 8 | |
| Roofing | 6 | |
| Estimating, Plan Reading and General Residential Code Requirements | 16 | |
| OSHA Safety | 4 | |
| Licensing and Business and Law | 10 | |
| Special Construction Zones (Wind and Coastal) and Erosion and Sedimentation Control | 6 |
Exam day details
- Administered by PSI Services for the NC Licensing Board for General Contractors.
- Fee: $79 per exam to PSI, nonrefundable. NCLBGC application and license fees are separate.
- 90 questions in 210 minutes (3.5 hours); 63 correct (70%) to pass.
- Code questions are based only on the 2018 NC codes. The 2024 NC codes are delayed and no earlier than May 1, 2027.
- The Residential classification covers residential units built to the NC Residential Code, with the site work, driveways, sidewalks and water and wastewater systems that go with them, plus S(Insulation), S(Interior Construction), S(Masonry Construction), S(Roofing), S(Swimming Pools) and S(Asbestos) work done as part of those units.
- Open book: bring your own bound copies of the allowed references. You may highlight, underline and index them with permanent tabs, but not write in them. Sticky flags are not allowed. Code books are the only references that may be copied and bound.
- PSI may add 5 to 10 unscored experimental questions. Their time does not count against your exam time.
- The Board approves your application first and sends an eligibility letter with your state ID number. The letter is good for 120 days and one exam; a no-show counts as an attempt.
- If you fail, you may retake as many times as you like within 12 months as long as the information in your application stays valid. Each attempt costs the exam fee.
- A silent, non-printing, non-programmable calculator is allowed.
Frequently asked questions
What's on the North Carolina Residential contractor exam?
90 questions: estimating, plan reading and general residential code requirements 16, site work, footings and foundations 12, carpentry 11, concrete and reinforcement 10, licensing and business and law 10, associated trades 8, masonry 7, roofing 6, special construction zones and erosion control 6 and OSHA safety 4.
Which code books do I bring?
The 2018 NC Residential Code and the 2018 NC Administrative Code and Policies, plus the NASCLA NC guide and the NC OSHA construction standards. Candidates bring their own copies.
How many times can I retake it?
As many times as you like within 12 months while your application information stays valid, paying $79 each time.
Free questions with answers
Show all 10 free questions and answers
Regardless of frost depth, what is the minimum depth of the bottom of an exterior footing below finished grade?
Answer: 12 inches
NC R403.1.4: exterior footings must extend below the frost line in Table R301.2(1), and in no case may the bottom of an exterior footing be less than 12 inches below finished grade (footings on solid rock are exempt from the frost-line rule). Six inches is the minimum footing thickness, not depth.
Reference: 2018 North Carolina Residential Code (2015 IRC base), R403.1.4
A No. 5 reinforcing bar is placed in a stem wall cast in removable forms, and the wall face will be exposed to earth. What minimum concrete cover does the code require?
Answer: 1 1/2 inches
NC R404.1.3.3.7.4 sets 1 1/2 inches for No. 5 bars and smaller and 2 inches for No. 6 and larger in removable-form concrete exposed to earth or weather. Three inches is for concrete cast against the earth, and 3/4 inch is for concrete not exposed to earth or weather or cast in stay-in-place forms.
Reference: 2018 North Carolina Residential Code, R404.1.3.3.7.4
What is the minimum thickness of a solid masonry wall for a one-story dwelling when the wall is not more than 9 feet high?
Answer: 6 inches
R606.4.1 allows solid masonry walls of one-story dwellings and garages to be 6 inches thick where 9 feet high or less (plus 6 feet more in a gable). Bearing walls more than one story high must be 8 inches minimum.
Reference: 2018 North Carolina Residential Code (2015 IRC base), R606.4.1
A 2x10 sawn joist (actual depth 9 1/4 inches) needs a notch on its top edge in the outer third of the span, away from the ends. What is the largest notch depth allowed?
Answer: About 1 9/16 inches (one-sixth of the depth)
R502.8.1 limits notches in solid lumber joists to one-sixth of the member depth, not in the middle third of the span: 9.25 / 6 = 1.54 inches. One-fourth (2.31 inches) is the limit for notches at the member ends, and one-third (3.08 inches) is the hole diameter limit.
Reference: 2018 North Carolina Residential Code (2015 IRC base), R502.8.1
Under the North Carolina amendment to R908.3, a roof replacement must include what with the existing roof covering and the deck?
Answer: Remove layers to the deck; replacing up to 15 percent of the deck is not structural work
NC's R908.3 says roof replacement includes removal of existing layers of roof coverings down to the roof deck and replacement of up to 15 percent of the total existing roof deck; replacing up to 15 percent is not considered structural work.
Reference: 2018 North Carolina Residential Code, R908.3 (NC amendment)
What is the minimum gypsum board required on the garage side of a wall separating an attached garage from the dwelling?
Answer: 1/2-inch gypsum board or equivalent
Table R302.6 requires not less than 1/2-inch gypsum board or equivalent on the garage side of the separation from the residence and its attics. Fastening follows Table R702.3.5.
Reference: 2018 North Carolina Residential Code (2015 IRC base), Table R302.6
Under the North Carolina amendment to R305.1, what is the minimum ceiling height in a habitable room, and in a bathroom, toilet room or laundry room?
Answer: 7 feet in habitable rooms and 6 feet 8 inches in bathrooms, toilet rooms and laundry rooms
NC R305.1 sets a minimum ceiling height of 7 feet for habitable space, hallways and basement portions containing them, and 6 feet 8 inches for bathrooms, toilet rooms and laundry rooms.
Reference: 2018 North Carolina Residential Code, R305.1
What is the maximum value of a single project that the holder of a Limited general contractor license may undertake, excluding the cost of land and ancillary costs to improve the land?
Answer: $750,000
G.S. 87-10(a1): a limited license holder may act as general contractor on a single project valued up to $750,000; an intermediate licensee up to $1,500,000; an unlimited licensee without restriction as to value. Land and land-improvement costs are excluded.
Reference: N.C. General Statutes Chapter 87, G.S. 87-10(a1)
At what height above a lower level must fall protection be provided for workers on an unprotected side or edge on a residential construction site, under the OSHA construction standard?
Answer: 6 feet
29 CFR 1926.501(b)(1) requires each employee on a walking or working surface with an unprotected side or edge 6 feet or more above a lower level to be protected by guardrail, safety net or personal fall arrest systems. NC OSHA enforces the federal construction standards.
Reference: 29 CFR 1926 (adopted by NC OSHA for construction), 29 CFR 1926.501(b)(1)
Under the Sedimentation Pollution Control Act of 1973, land-disturbing activity of what size on a tract generally requires an approved erosion and sedimentation control plan?
Answer: More than one acre
G.S. 113A-57(4) bars any person from starting land-disturbing activity that will disturb more than one acre on a tract unless an erosion and sedimentation control plan has been filed with the agency having jurisdiction (30 or more days before, except under an express permit program) and approved. G.S. 87-10(b) also requires the contractor exam to cover the Act.
Reference: N.C. General Statutes Chapter 113A, Article 4 (Sedimentation Pollution Control Act of 1973), G.S. 113A-57(4)
Sources
- PSI: NC Licensing Board for General Contractors Candidate Information Bulletin (updated 11/9/2026) (opens in a new tab)
- NC Licensing Board for General Contractors (NCLBGC) (opens in a new tab)
- NC Office of State Fire Marshal: code book sales (opens in a new tab)
Questions last verified November 14, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.