Virginia licensing exam

Virginia Journeyman and Master Gasfitter Exam: Practice Test & Licensing Guide

The PSI exam for Virginia's journeyman and master gasfitter licenses (one shared exam): 50 open-book questions on natural and LP gas piping, pipe sizing, LP-gas tanks, controls, testing and the Board's rules.

Questions
50
Time limit
2.5 hours
Passing score
70%

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10Standards of Practice

A regulant who was issued a gas fitter license in March 2024 passes the exam for an added plumbing designation in October 2025. How is the renewal date for the license set under 18VAC50-30-150?

Requirements at a glance

AgencyVirginia Department of Professional and Occupational Regulation (DPOR), Board for Contractors; exams by PSI
ExperienceJourneyman: 8 years of experience alone, or school hours plus fewer years (for example 120 hours plus 4 years); see 18VAC50-30-39 for master
Examgasfitter exam (journeyman and master): 50 items, 150 minutes, 35 correct (journeyman) or 37 (master)
Books allowed2021 IFGC (Virginia Fuel Gas Code) and NFPA 58 (2014)
Fees$100 (journeyman) or $125 (master) to PSI; $150 original DPOR license

Gas piping installers applying to the Virginia Board for Contractors for a journeyman or master gasfitter license covering both natural gas and LP gas. Both levels take the same exam with different pass scores.

How to get licensed, step by step

  1. Check the education and experience rules

    You must be 18 and document training and work experience. The requirements depend on the license level; see 18VAC50-30-39.

    Virginia Administrative Code 18VAC50-30 (tradesman regulations) (opens in a new tab)Virginia DPOR: Tradesmen licensing (opens in a new tab)

  2. Apply to the Board for Contractors

    The Board reviews your application first and approves you to take the exam. Disclose any convictions.

    Virginia DPOR: Tradesmen licensing (opens in a new tab)

  3. Register and schedule the gasfitter exam (journeyman and master) with PSI

    After approval, pay PSI and book a seat. Your eligibility is good for one year and you can retake within that year.

    Schedule with PSI (Virginia DPOR exams) (opens in a new tab)

  4. Get licensed

    Send your passing result to the Board with the license fee ($150 for an original journeyman or master license; additional designations $105). Trade licenses run three years and need continuing education (3 hours per designation) on the current code edition.

    Virginia DPOR: Tradesmen licensing (opens in a new tab)Virginia Administrative Code 18VAC50-30 (tradesman regulations) (opens in a new tab)

How to prepare

  • Bring the editions on PSI's list: the 2020 NEC for electrical and the 2021 IPC, IMC and IFGC (Virginia Plumbing, Mechanical and Fuel Gas Codes) for plumbing, HVAC and gas. Virginia's 2024 code cycle (NEC 2023 and the 2024 I-codes) is tentatively set to take effect in October 2027; until PSI publishes a new bulletin, code questions use the 2021 USBC editions.
  • Exam fees may change: a rule effective 3/11/2026 raised the Board's exam fee caps, though DPOR still lists $100 for journeyman and $125 for master exams. Confirm the fee with PSI when you register.
  • Tab your books before exam day with permanent tabs. You can highlight, underline and index, but you can't write in them, use removable tabs or bring loose papers or study guides.
  • Ten items on every journeyman and master exam (nine on the residential exams) come from the Board's rules, 18VAC50-30. They are easy points if you read the regulation once.
  • Natural and LP gas piping (12) and pipe sizing (11) are 23 of the 50 items. Tab the IFGC Chapter 4 sizing tables and know how to pick the right table for gas, pressure and pipe material.
  • LP-gas tanks (9) come from NFPA 58; tab its container location and distance tables.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

Books for this exam

This is an open-book exam: you can bring the references below, and most questions come from the Virginia Fuel Gas Code and 18VAC50-30. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.

Official reference list (as published by the testing agency)
  • International Fuel Gas Code (IFGC), 2021, with Virginia amendments (Virginia Fuel Gas Code); the 2018 edition was also accepted until 5/1/2025
  • NFPA 58, Liquefied Petroleum Gas Code, 2014
  • Board for Contractors Individual License and Certification Regulations (18VAC50-30)

What's on the exam

Official content outline from PSI Services (number of questions per topic):

TopicQuestions
Standards of Practice3
Standards of Conduct2
Renewal and Reinstatement2
Definitions1
Qualification for Licensure1
Revocation1
Natural and LP Gas Piping12
Pipe Sizing11
LP-Gas Tanks9
Gas Piping Controls5
Testing3

Exam day details

  • Administered by PSI Services for the Virginia Department of Professional and Occupational Regulation (DPOR), Board for Contractors.
  • Fee: $100 (journeyman) or $125 (master) to PSI per exam, not refundable or transferable and valid for one year. DPOR application and license fees are separate.
  • 50 items in 150 minutes. Journeyman passing score 35 (70%); master passing score 37 (74%).
  • Journeyman gasfitter: 8 years of experience alone, or school hours plus fewer years (for example 120 hours plus 4 years). Master: see 18VAC50-30-39.
  • Sizing questions come from the IFGC 2021 pipe sizing tables; know which table matches the gas, pressure and pipe material.
  • Open book: bring your own bound copies of the listed references. You may highlight, underline and index them beforehand and add permanent tabs, but removable tabs, loose papers, writing and study guides are not allowed.
  • PSI may add unscored experimental questions to the exam.
  • Exam fees may change: a rule effective 3/11/2026 raised the Board's exam fee caps, though DPOR still lists $100 (journeyman) and $125 (master). Confirm the fee with PSI when you register.
  • The Board for Contractors must approve your application first (education and experience); then you pay and register with PSI. Your exam eligibility is good for one year and you can retake within that year.
  • Every Virginia tradesman exam includes 10 items on the Board's rules (18VAC50-30): standards of practice, standards of conduct, renewal and reinstatement, definitions, qualification for licensure and revocation.

Note: These facts come from the PSI bulletin dated 1/14/2025; no newer bulletin was found. The 2021 Virginia USBC (NEC 2020 and the 2021 I-codes) is in force now. Virginia's 2024 code cycle (NEC 2023 and the 2024 I-codes) is tentatively scheduled to take effect in October 2027, and PSI will likely update its bulletin then; that date is not confirmed. Check the current PSI bulletin before you test. NFPA 58 (2014) is not freely readable, so LP-gas questions beyond the IFGC 2021 were written without checking that text.

Frequently asked questions

What score do I need on the Virginia gasfitter exam?

35 of 50 for a journeyman license and 37 of 50 for a master license. It is one shared exam.

Which books can I bring?

The 2021 International Fuel Gas Code (Virginia Fuel Gas Code) and NFPA 58 (2014). The exam is open book: highlight and add permanent tabs, but don't write in them.

How is this different from the LP and natural gas fitter exams?

This exam covers both fuels and includes LP-gas tanks. Virginia's LP gas fitter and natural gas fitter exams are separate, narrower licenses.

Free questions with answers

Show all 10 free questions and answers
  1. A regulant who was issued a gas fitter license in March 2024 passes the exam for an added plumbing designation in October 2025. How is the renewal date for the license set under 18VAC50-30-150?

    Answer: By the date the license was originally issued, not the date the added designation was approved

    18VAC50-30-150 B says a license can carry several trade designations but the renewal date follows the date the license was originally issued, not the date of the most recent designation. So the added plumbing designation does not move the March 2027 expiration.

    Reference: 18VAC50-30 Board for Contractors Individual License and Certification Regulations, 18VAC50-30-150 B

  2. A gas fitter is paid $800 to install gas piping for a small job, takes the money, does part of the work and then stops. Under 18VAC50-30-190, how long does a cessation of work without justification count as evidence of abandonment?

    Answer: 30 days or more

    18VAC50-30-190 item 6 prohibits abandonment, meaning intentional and unjustified failure to complete contracted work or retaining money paid for work not performed. For gas fitters on jobs under $1,000, unjustified cessation of work for 30 days or more is evidence of abandonment.

    Reference: 18VAC50-30 Board for Contractors Individual License and Certification Regulations, 18VAC50-30-190 (item 6)

  3. A gas fitter reinstates a license 14 months after it expired. During those 14 months a complaint is filed about work done in month 6. Under 18VAC50-30-140 B, what is the Board's authority?

    Answer: The regulant is regarded as continuously licensed, so the Board may still discipline for that work

    Under 18VAC50-30-140 B a reinstated regulant is regarded as having been continuously licensed without interruption. The regulant stays under the Board's disciplinary authority during the whole period and may be held accountable for activities in it. Any regulated work during expiration may also be unlicensed activity under 18VAC50-30-130 E.

    Reference: 18VAC50-30 Board for Contractors Individual License and Certification Regulations, 18VAC50-30-140 B

  4. An applicant for the journeyman gas fitter exam has 120 hours of formal vocational training in the trade. How much practical experience does 18VAC50-30-39 C require?

    Answer: Four years

    18VAC50-30-39 C lists the journeyman gas fitter options: bachelor's degree plus 1 year; associate degree or two-year certificate plus 2 years; 120 hours plus 4 years; 80 hours plus 5 years; 40 hours plus 6 years; or 8 years with no formal training.

    Reference: 18VAC50-30 Board for Contractors Individual License and Certification Regulations, 18VAC50-30-39 C

  5. In 18VAC50-30-10, what separates a 'master' from a 'journeyman'?

    Answer: A master can plan and lay out installation details and supervise the work; a journeyman works to plans and specifications

    The definitions in 18VAC50-30-10 D give a journeyman the ability to install, repair and maintain materials and equipment according to plans and specifications. A master has the ability to plan and lay out the details of installation and supervise the work. Both need working knowledge of the Virginia Uniform Statewide Building Code.

    Reference: 18VAC50-30 Board for Contractors Individual License and Certification Regulations, 18VAC50-30-10 D ("Journeyman", "Master")

  6. A designer is sizing Schedule 40 steel pipe for natural gas (0.60 specific gravity) with an inlet pressure under 2 psi and a 0.5 inch w.c. pressure drop. Which IFGC table applies?

    Answer: Table 402.4(2)

    Table 402.4(1) is Schedule 40 pipe at 0.3 in. w.c. drop, 402.4(3) is 3.0 in. w.c. and 402.4(5) is 2.0 psi inlet with 1.0 psi drop. The 0.5 in. w.c. drop is Table 402.4(2). Always match gas, inlet pressure and pressure drop before reading a capacity.

    Reference: 2021 Virginia Fuel Gas Code (IFGC 2021 with Virginia amendments), Table 402.4(2)

  7. Which fitting is acceptable in a concealed location under Section 404.5?

    Answer: A threaded tee

    Section 404.5 limits fittings in concealed locations to threaded elbows, tees, couplings, plugs and caps, brazed fittings, welded fittings, and fittings listed to ANSI LC-1/CSA 6.26 or LC-4/CSA 6.32. Unions, flared and set-screw fittings are not on that list.

    Reference: 2021 Virginia Fuel Gas Code (IFGC 2021 with Virginia amendments), Section 404.5

  8. Gas arrives at a building at 5 psi, and the appliances are designed for 14 inches w.c. or less. What does Section 416.1 require, and to what limit must it hold pressure on a regulator failure per 416.2.1?

    Answer: Overpressure protection that limits pressure to each appliance to 2 psi or less

    Section 416.1 requires overpressure protection where the gas supplier delivers more than 2 psi to piping serving appliances designed for 14 inches w.c. or less. Section 416.2.1 requires each device to limit the pressure to each connected appliance to 2 psi or less upon failure of the line pressure regulator.

    Reference: 2021 Virginia Fuel Gas Code (IFGC 2021 with Virginia amendments), Section 416.1, 416.2.1

  9. Which of these may NOT be used as the test medium for pressure testing gas piping under Section 406.2?

    Answer: Oxygen

    Section 406.2 says the test medium shall be air, nitrogen, carbon dioxide or an inert gas, and that oxygen shall not be used. Oxygen under pressure with oils or grease in the piping is a fire and explosion hazard.

    Reference: 2021 Virginia Fuel Gas Code (IFGC 2021 with Virginia amendments), Section 406.2

  10. The scope in Section 301.1 covers LP-gas piping systems up to what operating pressure?

    Answer: 20 psig

    Section 301.1 applies the code to systems up to 125 psig, gas-air mixtures within the flammable range up to 10 psig, and LP-gas piping systems with an operating pressure of 20 psig or less. LP-gas piping above 20 psig is outside that scope; Section 402.7 refers such systems to NFPA 58.

    Reference: 2021 Virginia Fuel Gas Code (IFGC 2021 with Virginia amendments), Section 301.1

Sources

Questions last verified November 14, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.