Texas licensing exam

Texas Class D Water Operator Exam (TCEQ): Practice Test & Licensing Guide

The TCEQ entry-level public water system operator exam: rules, safety, water sources and treatment, distribution, disinfection and basic water math. 70% to pass.

Questions
Not published by Texas
Time limit
3 hours
Passing score
70%
Books
Closed book
What to study ↓

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10Water Math

A well pump delivers 0.5 MGD to a ground storage tank, and the operator wants a chlorine dose of 2.0 mg/L. Using lbs/day = dose (mg/L) × flow (MGD) × 8.34 lb/gal, how many pounds of chlorine per day must be fed?

Requirements at a glance

EducationHigh school diploma or GED (otherwise a 2-year provisional Class D license)
TrainingBasic Water Works Operations + Resiliency Overview (TCEQ-approved)
ExperienceNone for Class D
Exam3 hours, 70% to pass, closed book, calculator allowed; English or Spanish
Fees$111 TCEQ application + the testing center's fee

People starting out as public water system operators in Texas: a high school diploma or GED plus the Basic Water Works Operations and Resiliency Overview courses. No experience is required.

How to get licensed, step by step

  1. Take the required training

    Complete Basic Water Works Operations and the Resiliency Overview course from a TCEQ-approved provider.

    TCEQ: approved training providers (opens in a new tab)

  2. Apply to TCEQ

    Submit your operator license application and $111 fee. You'll get an approval letter once TCEQ accepts it.

    TCEQ: water operator licenses (opens in a new tab)

  3. Schedule at a testing center

    Book the computer-based exam directly with a TCEQ-approved testing center, mostly community colleges across Texas. Some offer a same-day retest.

    TCEQ: computer-based testing centers (opens in a new tab)

  4. Pass and start working toward Class C

    Results are immediate and the license usually arrives within about a week. Most Class D licenses can't be renewed, so plan your experience and training for Class C.

    TCEQ: water operator licenses (opens in a new tab)

How to prepare

  • Study straight from TCEQ's Need-to-Know Criteria for Class D: every exam topic is listed there.
  • Know the numbers in 30 TAC Chapter 290 cold: minimum disinfectant residuals, sampling requirements and operating practices.
  • Practice the pounds formula (mg/L × MGD × 8.34) and basic area, volume and flow conversions until they're quick. A non-programmable calculator is allowed.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

What to study

This is a closed-book exam, so nothing comes into the exam room. Study from these:

Official reference list (as published by the testing agency)
  • TCEQ Need-to-Know Criteria for Class D Water Operators
  • 30 TAC Chapter 30, Subchapters A and K (operator licensing)
  • 30 TAC Chapter 290, Subchapters D and F (public water system rules and drinking water standards)
  • Basic Water Works Operations course manual (TCEQ-approved training)

What's on the exam

Estimated topic weighting. No official breakdown is published:

TopicQuestions
Rules and Regulations12
Safety10
General Water Knowledge20
Groundwater12
Surface Water8
Storage and Distribution14
Disinfection14
Water Math10

Exam day details

  • Administered by Texas Commission on Environmental Quality (TCEQ), at TCEQ-approved computer testing centers.
  • Fee: $111 TCEQ application fee, plus the testing center's fee (about $30–$54).
  • 3 hours, 70% to pass, closed book. A non-programmable calculator is allowed.
  • TCEQ doesn't publish the number of questions or topic weights. Our topics follow TCEQ's Need-to-Know Criteria for Class D, with weights we estimated; our practice exams are 100 questions in 3 hours.
  • Taken on computer at TCEQ-approved testing centers (mostly community colleges) across Texas. Results are immediate. Available in English and Spanish.
  • In TCEQ's fiscal year 2024, only 38% of Class D Water exams were passed.
  • Most Class D water licenses can't be renewed: you're expected to move up to Class C.

Note: TCEQ doesn't publish the number of questions or how many come from each topic. Our topic weights are estimates based on TCEQ's Need-to-Know Criteria.

Frequently asked questions

What's on the TCEQ Class D water exam?

TCEQ's Need-to-Know Criteria cover licensing rules and drinking water standards, safety, general water knowledge (waterborne disease, sampling, water characteristics, recordkeeping), groundwater wells and pumps, surface water treatment basics, storage and distribution (including cross-connections and backflow), chlorine disinfection, and basic water math.

How hard is the Class D water operator exam?

Harder than people expect: TCEQ reported a 38% pass rate for Class D Water exams in fiscal year 2024. You need 70% to pass.

What do I need before taking the Class D water exam?

A high school diploma or GED, the Basic Water Works Operations course and the Resiliency Overview training, and an approved TCEQ application. No work experience is required.

Free questions with answers

Show all 10 free questions and answers
  1. A well pump delivers 0.5 MGD to a ground storage tank, and the operator wants a chlorine dose of 2.0 mg/L. Using lbs/day = dose (mg/L) × flow (MGD) × 8.34 lb/gal, how many pounds of chlorine per day must be fed?

    Answer: 8.34 lb/day

    Use the pounds formula: lbs/day = 2.0 mg/L × 0.5 MGD × 8.34 lb/gal = 1.0 × 8.34 = 8.34 lb/day. 1.0 lb/day leaves out the 8.34 factor, so it is still in mg/L × MGD and not in pounds. 16.7 lb/day treats the flow as 1.0 MGD. 33.4 lb/day divides by the flow when it should multiply (2.0 × 8.34 ÷ 0.5).

    Reference: TCEQ, Need-to-Know Criteria for Class D Water Operators, Math: solve basic water utility math problems using area, volume, and chemical dosage formulas

  2. A plant feeds 20 lb/day of chlorine into a flow of 1.2 MGD. Using the pounds formula, what is the chlorine dose in mg/L?

    Answer: 2.0 mg/L

    Rearrange the formula: dose (mg/L) = lbs/day ÷ (MGD × 8.34) = 20 ÷ (1.2 × 8.34) = 20 ÷ 10.01 = 2.0 mg/L. 16.7 mg/L divides by the flow but leaves out 8.34. 2.4 mg/L divides by 8.34 but leaves out the flow. 200 mg/L multiplies all three numbers together when two of them should be divisors.

    Reference: TCEQ, Need-to-Know Criteria for Class D Water Operators, Math: solve basic water utility math problems using area, volume, and chemical dosage formulas

  3. A community system treats groundwater only (not under the direct influence of surface water). What is the highest number of connections at which a single Class D operator can meet TCEQ's licensed-operator requirement?

    Answer: 250 connections

    30 TAC §290.46(e)(4)(A) lets groundwater systems serving no more than 250 connections use an operator with a Class D or higher license. Systems with more than 250 and up to 1,000 connections need a Class C or higher groundwater operator (§290.46(e)(4)(B)). Above 1,000 connections, two Class C or higher groundwater operators are needed, each working at least 16 hours a month (§290.46(e)(4)(C)).

    Reference: 30 TAC Chapter 290, Subchapter D, §290.46(e)(4)

  4. A system disinfects with free chlorine. What is the lowest free chlorine residual TCEQ allows anywhere in the distribution system?

    Answer: 0.2 mg/L

    30 TAC §290.110(b)(4) requires a residual of at least 0.2 mg/L free chlorine, or 0.5 mg/L chloramine measured as total chlorine, throughout the distribution system. §290.46(d)(2) repeats this for every finished water storage tank. 0.5 mg/L is the chloramine minimum, not the free chlorine minimum. 4.0 mg/L is the maximum residual disinfectant level (MRDL).

    Reference: 30 TAC Chapter 290, Subchapter F, §290.110(b)(4); §290.46(d)(2)

  5. During an inspection of a ground storage tank, an operator checks the roof vent. What screening does TCEQ require on storage tank vents?

    Answer: Corrosion-resistant screen of 16-mesh or finer

    30 TAC §290.43(c)(1) requires roof vents, either gooseneck or roof ventilator, to have corrosion-resistant screens of 16-mesh or finer. The screens must be clamped in place with stainless or galvanized bands or wires to keep out animals, birds and insects. A gooseneck shape does not replace the screen. 1/4-inch hardware cloth is far coarser than 16-mesh and would let insects in.

    Reference: 30 TAC Chapter 290, Subchapter D, §290.43(c)(1)

  6. A system is choosing a site for a new public supply well. Which nearby feature would make the site unacceptable under TCEQ rules?

    Answer: A septic tank perforated drainfield 120 ft away

    30 TAC §290.41(c)(1)(A) bars well sites within 150 feet of a septic tank perforated drainfield. A drainfield 120 ft away is too close. The same rule bars sites within 50 feet of a septic tank, tile or concrete sanitary sewer, storm sewer or cemetery. Roads, fences and storage tanks are not listed pollution hazards.

    Reference: 30 TAC Chapter 290, Subchapter D, §290.41(c)(1)(A)

  7. TCEQ requires all water from surface sources to receive complete treatment. Which set of processes does that plant have to provide?

    Answer: Coagulation, sedimentation, filtration, covered clearwell and disinfection

    30 TAC §290.42(d)(1) says surface water must get complete treatment at a plant with pretreatment disinfection, taste and odor control, continuous coagulation, sedimentation, filtration, covered clearwell storage and terminal disinfection with chlorine or chlorine compounds. Surface water carries particles and protozoa that disinfection alone can't reliably handle. That is why aeration and chlorination, which may be enough for some groundwater, are not acceptable here.

    Reference: 30 TAC Chapter 290, Subchapter D, §290.42(d)(1)

  8. Before entering a valve vault, an operator tests the air. Below what oxygen level does OSHA consider the atmosphere oxygen deficient?

    Answer: 19.5% oxygen by volume

    29 CFR 1910.146(b) defines an oxygen-deficient atmosphere as one with less than 19.5% oxygen by volume. The definition of hazardous atmosphere lists oxygen below 19.5% or above 23.5%, so 23.5% is the oxygen-enriched limit, not the deficient one. Normal air is about 21%. Oxygen can be used up or displaced in vaults and tanks, which is why it is tested before entry.

    Reference: 29 CFR 1910.146 (OSHA Permit-Required Confined Spaces), 1910.146(b), definitions of "Oxygen deficient atmosphere" and "Hazardous atmosphere"

  9. An operator learns that a routine coliform sample is total coliform-positive. What is the minimum repeat sampling required?

    Answer: At least three repeats, within 24 hours of notice

    30 TAC §290.109(d)(3)(A) requires a set of repeat samples within 24 hours of being notified of the positive result, or as soon as possible if the local lab is closed. The system must collect no fewer than three repeat samples for each total coliform-positive sample. §290.109(d)(3)(B) requires all repeats to be taken on the same day, except at a system with a single service connection. A good chlorine residual does not cancel the repeat requirement.

    Reference: 30 TAC Chapter 290, Subchapter F, §290.109(d)(3)(A)-(B)

  10. A small system collects fewer than 40 distribution coliform samples a month. Which event is a Level 1 treatment technique trigger that requires a Level 1 assessment?

    Answer: Two or more samples collected in the month are total coliform-positive

    For systems collecting fewer than 40 samples a month, 30 TAC §290.109(c)(1)(B) makes two or more total coliform-positive samples in a month a Level 1 trigger. The more-than-5.0% test applies only to systems collecting 40 or more samples a month (§290.109(c)(1)(A)). Failing to collect all required repeats is also a Level 1 trigger. The Level 1 assessment form is due within 30 days (§290.109(c)(3)(C)(i)).

    Reference: 30 TAC Chapter 290, Subchapter F, §290.109(c)(1) and (c)(3)(C)

Sources

Questions last verified October 16, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.