Tennessee licensing exam

Tennessee Business and Law Exam: Practice Test & Licensing Guide

Tennessee's required contractor Business and Law exam: 50 open-book questions on business organization, licensing, estimating, contracts, risk, labor, tax and lien law. 73% to pass.

Questions
50
Time limit
2.5 hours
Passing score
73%

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10Estimating and Bidding

A contractor's estimated direct cost for a job is $60,000, and the owner wants a 20% gross margin, meaning profit equal to 20% of the selling price. What bid price achieves that margin?

Requirements at a glance

Who takes itEvery applicant for a Tennessee contractor license
Format50 questions, 2.5 hours, 73% to pass, open book
Book allowedNASCLA Contractor's Guide to Business, Law and Project Management: Tennessee, 4th Edition
Fee$53 to Prov per attempt

Every applicant for a Tennessee contractor license (CE, CMC, BC and similar), in addition to the trade exam.

How to get licensed, step by step

  1. Get the Tennessee guide

    Buy the NASCLA Tennessee guide (4th edition) and tab it with permanent tabs.

    Schedule with Prov (Tennessee contractors) (opens in a new tab)

  2. Learn the heavy chapters

    Estimating and bidding (7), contracts (6) and the 5-question sections (licensing, OSHA safety, labor law, tax law) make up most of the exam.

    Schedule with Prov (Tennessee contractors) (opens in a new tab)

  3. Schedule with Prov

    Schedule this exam with your trade exam once the Board has your application.

    Schedule with Prov (Tennessee contractors) (opens in a new tab)Prov: register for your exam (opens in a new tab)

How to prepare

  • Know the Tennessee licensing thresholds: prime contracts of $25,000 or more need a license (masonry subcontractors $100,000 or more).
  • Practice estimating and financial math: markup vs. margin, overhead recovery, payroll and tax basics.
  • Lien law is only 2 questions; contracts (6) and risk management (4) deserve more of your time.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

Books for this exam

This is an open-book exam: you can bring the references below, and most questions come from the NASCLA Tennessee guide. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.

Official reference list (as published by the testing agency)
  • Contractor's Guide to Business, Law and Project Management: Tennessee, 4th Edition, NASCLA

What's on the exam

Official content outline from Prov (number of questions per topic):

TopicQuestions
Business Organization4
Licensing5
Estimating and Bidding7
Contracts6
Project Management4
Risk Management4
OSHA Safety5
Financial Management3
Labor Law5
Tax Law5
Lien Law2

Exam day details

  • Administered by Prov for the Tennessee Board for Licensing Contractors.
  • Fee: $53 per exam to Prov, for a first attempt or a retake. Board application and license fees are separate.
  • 50 questions in 2.5 hours; 73% to pass.
  • Open book: bring your own copies of the listed references. You may highlight and add permanent tabs, but moveable tabs are not allowed. Only a simple 4-function calculator is permitted.
  • Test at a Prov testing center or at home with Examroom (remote proctoring). All Tennessee contractor exams need 73% to pass.
  • You may retake as many times as needed with no waiting period, at $53 per attempt. If you fail within 10 points of 73% you can request a review of your exam.
  • Prov replaced PSI as the Tennessee vendor on 7/1/2026. Reference lists accept PSI-era books until 1/1/2027, then only Prov-recommended ones.
  • Every new contractor takes the Business and Law exam plus a trade exam for the classification. Reciprocity or NASCLA exams can waive the trade exam.

Frequently asked questions

What's on the Tennessee Business and Law exam?

50 questions: estimating and bidding 7, contracts 6, licensing 5, OSHA safety 5, labor law 5, tax law 5, business organization 4, project management 4, risk management 4, financial management 3 and lien law 2.

What book is used?

The NASCLA Contractor's Guide to Business, Law and Project Management: Tennessee, 4th Edition. The exam is open book.

How much does it cost?

$53 to Prov for each attempt. The Board's application and license fees are separate.

Free questions with answers

Show all 10 free questions and answers
  1. A contractor's estimated direct cost for a job is $60,000, and the owner wants a 20% gross margin, meaning profit equal to 20% of the selling price. What bid price achieves that margin?

    Answer: $75,000

    Margin is figured on the selling price, so price = cost / (1 - 0.20) = $60,000 / 0.80 = $75,000, and the profit is $15,000 = 20% of $75,000. Adding 20% to cost ($72,000) is a markup, which yields only a 16.7% margin. $80,000 divides by 0.75, and $78,000 adds 30%.

    Reference: General business practice, Markup versus margin in pricing a bid

  2. Under a cost-plus contract, how is the contractor paid?

    Answer: Actual allowable project costs plus a fee or percentage for overhead and profit

    A cost-plus contract reimburses the contractor's documented costs and adds an agreed fee or percentage. The owner carries the cost risk, so the contract should define allowable costs and give audit rights. A fixed total sum is a lump-sum contract.

    Reference: General business practice, Contract types: cost-plus

  3. A custom item has a 10-week delivery time that starts only after the submittal is approved. The submittal is sent to the design team on day one and the review takes 3 weeks. Installation is scheduled to start 11 weeks after the submittal is sent. What is the result?

    Answer: The item arrives 2 weeks after the installation start

    Review takes 3 weeks, and the 10-week delivery begins only on approval, so the item arrives 3 + 10 = 13 weeks after the submittal went out. Installation starts at 11 weeks, so the item is 2 weeks late. Counting only the 10-week delivery gives 1 week early, and the other choices are miscounts. Review time belongs in the lead-time chain.

    Reference: General business practice, Scheduling: procurement lead time

  4. A masonry subcontractor is offered a $120,000 subcontract. In Tennessee, how does the Board's threshold treat masonry subcontractors?

    Answer: A masonry sub is licensed on subcontracts of $100,000 or more, so this one counts

    Masonry subcontractors are licensed on work of $100,000 or more, while prime jobs are licensed at $25,000 or more. A $120,000 masonry subcontract is above the masonry figure.

    Reference: NASCLA Contractor's Guide: Tennessee, 4th Edition (concept: Tennessee contractor licensing), Licensing: masonry subcontractor threshold

  5. In a general partnership, how is liability for the business's debts treated?

    Answer: Each general partner can be held liable for the firm's debts, even for acts of the other partners

    General partners have joint and several personal liability for partnership obligations, and one partner's business acts can bind the others. Limiting liability to the investment is a feature of limited partners and LLC members.

    Reference: General business practice, Forms of business: general partnership liability

  6. Builder's risk insurance is intended to protect which of these?

    Answer: The structure and materials of a project under construction against fire, wind, theft and similar loss

    Builder's risk (course-of-construction) coverage insures the work in progress, usually including materials stored on site, against named or all-risk perils. Worker injuries fall under workers' compensation, and third-party claims fall under general liability.

    Reference: General business practice, Insurance: builder's risk

  7. An employee is admitted to a hospital for treatment of a work-related injury. By when must the employer report this inpatient hospitalization to OSHA?

    Answer: Within 24 hours of learning of the in-patient hospitalization

    Section 1904.39(a)(2) requires an in-patient hospitalization, amputation or loss of an eye to be reported within 24 hours of the employer learning of it. The 8-hour limit applies to fatalities, and 7 days is the time to record a case on the Form 300 log.

    Reference: 29 CFR Part 1904, 1904.39(a)(2)

  8. A worker is paid $24.00 per hour and works 46 hours in one workweek, with no other premium pay. Under the federal Fair Labor Standards Act, what is the minimum gross pay for the week?

    Answer: $1,176.00

    Regular pay = 40 x $24.00 = $960.00. Overtime rate = $24.00 x 1.5 = $36.00 for the 6 hours over 40 = $216.00. Total = $1,176.00. Straight time gives $1,104.00, double time on 6 hours gives $1,248.00, and time and a half on all 46 hours gives $1,656.00.

    Reference: Fair Labor Standards Act, 29 U.S.C. 207(a)(1)

  9. How often does an employer ordinarily file Form 941, the Employer's Quarterly Federal Tax Return?

    Answer: Four times a year, once for each calendar quarter

    Form 941 reports wages paid, income tax withheld and the employer and employee Social Security and Medicare taxes, and it is filed for each calendar quarter. Very small employers may be allowed an annual Form 944, but quarterly filing is the standard rule.

    Reference: IRS Publication 15 (Circular E), Filing Form 941

  10. A contractor's revenue for the year was $800,000 and direct job costs were $600,000. What is the gross profit margin?

    Answer: 25%

    Gross profit = $800,000 - $600,000 = $200,000. Gross margin = $200,000 / $800,000 = 25%. Dividing by cost gives a 33.3% markup, and 75% is the share of revenue consumed by direct costs.

    Reference: General business practice, Financial statements: gross profit margin

Sources

Questions last verified November 15, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.