Requirements at a glance
| Agency | Minnesota Department of Labor and Industry (DLI) |
|---|---|
| Experience | No experience requirement listed in the DLI exam guide; see DLI for the license rules (Minn. Stat. 326B.805) |
| Exam | 110 questions (about 60 scored on the code outline), 5.5 hours, 70% to pass |
| Books allowed | None of your own: DLI supplies the 2020 Minnesota Residential Code, statutes and rules and a calculator |
| Fees | $50 per personal-license exam (Minn. Stat. 326B.092), plus application and license fees |
Contractors applying to DLI for a residential building contractor license (Minn. Stat. 326B.805); the exam is followed by bond and insurance requirements.
Official links
How to get licensed, step by step
Apply to DLI
Send DLI your residential building contractor license and exam application. After you pass, you must also meet the bond and insurance requirements before DLI issues the license.
Minnesota Department of Labor and Industry (DLI) (opens in a new tab)DLI: residential building contractor, remodeler and roofer (opens in a new tab)
Schedule your exam
After DLI approves your application, you schedule the exam in DLI's iMS system. DLI gives exams at its St. Paul office (Tuesday to Thursday) and at outstate sites including Duluth, Mankato, Rochester and St. Cloud.
Take the exam
You have 5.5 hours and need 70%. The exam is open book with DLI-supplied references; no personal books, notes or electronic devices.
DLI: residential building contractor, remodeler and roofer (opens in a new tab)DLI Residential Examination Guide (PDF) (opens in a new tab)
Results and retakes
DLI mails results in about 2 weeks. If you fail, wait 30 days after receiving results before reapplying.
How to prepare
- The residential exams are on the 2020 Minnesota Residential Code (Rules 1309, based on the 2018 IRC) and the 2020 Residential Energy Code, plus Minnesota statutes and rules. About 60 of the 110 questions are scored on the code content outline; the rest cover business, law and technical topics.
- DLI rates the Building Contractor exam hardest, then the Remodeler and Roofer exams. Know the Minnesota amendments, not just the model IRC.
- Every DLI exam is open book, but with DLI-supplied references only: a code book without tabs, the DLI laws-and-rules booklet and a desk calculator. You cannot bring your own books, so practice finding answers fast rather than relying on tabs.
- DLI publishes no topic weights, so our topic split is an estimate. Several versions of each exam are in use, and some questions ask for more than one answer or the choice that does not apply.
- Carpentry (floors, walls, roof framing, stairs, decks, chimneys) is the longest area; also drill egress, smoke alarms, energy code envelope criteria and foundations.
- Start with the free questions above to find your weak topics, then drill those first.
- Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
- Read every explanation, including for questions you got right, and look the section up in your own book.
Books for this exam
This is an open-book exam: you can bring the references below, and most questions come from the Minnesota Residential Code. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.
2020 Minnesota Residential Code (Minnesota Rules chapter 1309)Essential
DLI supplies it in the exam room. It is the 2018 International Residential Code with Minnesota amendments.
DLI Residential Building Contractor, Remodeler and Roofer Examination Guide (06/2020)
DLI's own content outline for the three residential exams, with sample questions and formulas.
Official reference list (as published by the testing agency)
- 2020 Minnesota Residential Code, Minnesota Rules chapter 1309 (the 2018 International Residential Code with Minnesota amendments), and the 2020 Minnesota Residential Energy Code
- Minnesota Rules chapters 1300, 1303, 1315, 1322, 1350 and 1360 and Minnesota Statutes 176, 181, 326B, 327A, 333 and 514 (in the DLI laws-and-rules booklet)
- DLI supplies the references and a desk calculator; you cannot bring your own.
What's on the exam
Estimated topic weighting. No official breakdown is published:
| Topic | Questions | |
|---|---|---|
| Plans and Specifications | 4 | |
| Energy Code (Envelope Criteria) | 5 | |
| Building Planning and Life Safety | 6 | |
| Sitework | 4 | |
| Concrete and Masonry Footings and Foundations | 5 | |
| Carpentry | 12 | |
| Roofing | 5 | |
| Exterior Finishes | 4 | |
| Foam Plastic Insulation | 3 | |
| Interior Finishes | 4 | |
| Associated Issues (Electrical, Plumbing, Energy) | 4 | |
| Job Site Safety | 4 |
Exam day details
- Administered by the Minnesota Department of Labor and Industry (DLI), which gives its own exams.
- Fee: $50 per personal-license exam (Minn. Stat. 326B.092). Application and license fees are separate.
- 110 questions in 5.5 hours; 70% to pass. About 60 of the 110 are scored on the code content outline; the rest cover business, law and technical topics DLI does not itemize. All questions are multiple choice with five options.
- DLI publishes the outline but no topic weights, so our topic split is an estimate of the 60 code-content questions. DLI rechecks scores within 5 percentage points of passing.
- The three residential exams are separate: the Remodeler exam uses the building contractor outline without its last two areas, and the Roofer exam has its own roofing outline. DLI rates the Building Contractor exam hardest.
- Open book with DLI-supplied references: you get the code book (without tabs), the DLI laws-and-rules booklet and a desk calculator. You cannot bring your own books, notes or electronic devices.
- DLI gives the exam at its St. Paul office and outstate sites, scheduled after DLI approves your application. The time limit is 5.5 hours; the passing score is 70%.
- Results are mailed in about 2 weeks. If you fail, wait 30 days after receiving results before reapplying.
- Some questions ask you to pick more than one answer (the question says how many) or the one choice that does not apply. Several versions of each exam are in use.
Note: DLI's residential guide (06/2020) prints the outline but no topic weights, so our topic split is an estimate. Our questions follow the 2020 Minnesota Residential Code (the 2018 IRC as amended by Rules 1309); the energy questions use Rules 1322, since we did not have the 2012 IECC text on file.
Frequently asked questions
How many questions are on the Minnesota residential building contractor exam?
110 in 5.5 hours; 70% to pass. About 60 are scored on the code content outline; the rest are business, law and technical questions.
Which code edition is tested?
The 2020 Minnesota Residential Code (Rules 1309, based on the 2018 IRC) and the 2020 Residential Energy Code.
What are the biggest areas on the outline?
Carpentry (floors, walls, roof framing, stairs, decks, chimneys and structural) is the longest area, followed by building planning and life safety, the energy code and concrete and masonry. DLI publishes no weights.
Free questions with answers
Show all 10 free questions and answers
Under the Minnesota amendment to IRC R305.1, what is the minimum ceiling height for habitable rooms in a new dwelling, measured from the finished floor to the lowest projection from the ceiling?
Answer: 7 feet
Minn. R. 1309.0305 rewrites R305.1: habitable space, hallways, bathrooms, toilet and laundry rooms need 7 ft, measured to the lowest ceiling projection. 6 ft 8 in. is the figure for basement areas that are not habitable, and 7 ft 6 in. and 8 ft are not code minimums.
Reference: 2020 Minnesota Residential Code (Minn. R. ch. 1309; 2018 IRC), Minn. R. 1309.0305 (amending IRC R305.1)
A 1/2-inch anchor bolt is being set near the end of a wood sill plate section under Minnesota's R403.1.6. How close to the end of the plate may the nearest bolt be placed?
Answer: Not less than 7 bolt diameters (3-1/2 inches) and not more than 12 inches from the end
R403.1.6 as amended requires at least two bolts per plate section, with one bolt located not more than 12 in. and not less than 7 bolt diameters from each end of the plate section. For 1/2 in. bolts, 7 x 0.5 = 3.5 in. minimum. The 6 ft maximum spacing applies between bolts.
Reference: 2020 Minnesota Residential Code (Minn. R. ch. 1309; 2018 IRC), Minn. R. 1309.0403, subp. 2 (R403.1.6)
A driveway apron and sidewalk lie within 10 feet of a new foundation wall and the 6-inch-in-10-feet grade fall is not possible on that side. How must impervious surfaces near the building be sloped under R401.3?
Answer: At least 2 percent away from the building
R401.3 exception: where physical barriers prohibit 6 in. of fall in 10 ft, drains or swales are used to ensure drainage away from the structure, and impervious surfaces within 10 ft of the foundation shall slope at least 2 percent away from the building.
Reference: 2020 Minnesota Residential Code (Minn. R. ch. 1309; 2018 IRC), IRC R401.3 exception
A new Minnesota stairway has a handrail on one side only. Under R311.7.1.2 as amended, what are the minimum clear widths of the stairway above the handrail height and at or below the handrail?
Answer: 36 inches above the handrail and 31-1/2 inches at and below it
Minn. R. 1309.0311 subp. 2 requires stairways to be at least 36 in. clear above the permitted handrail height and below headroom height. The clear width at and below handrail height, including treads and landings, may be 31-1/2 in. with a handrail on one side or 27 in. with handrails on both sides. Handrails may not project more than 4-1/2 in. on either side.
Reference: 2020 Minnesota Residential Code (Minn. R. ch. 1309; 2018 IRC), Minn. R. 1309.0311, subp. 2 (R311.7.1.2)
A builder in climate zone 6 wants to meet the Minnesota wood-frame wall requirement in Table R402.1.1 using continuous insulation. Which assembly satisfies the table?
Answer: R-13 cavity insulation plus R-5 continuous insulation or insulated siding
For zone 6, Table R402.1.1 lists the wood frame wall as R-20, or 13+5. Footnote f explains that the first value is cavity insulation and the second is continuous insulation or insulated siding, so 13+5 is R-13 cavity plus R-5 continuous. R-19 cavity alone falls short of R-20. Zone 7 lists R-21.
Reference: 2020 Minnesota Residential Energy Code (Minn. R. ch. 1322), Minn. R. 1322.0402, Table R402.1.1 and footnote f
What type of roof deck does Minnesota's amended R905.2.1 allow for asphalt shingles?
Answer: Solid sheathing, or nominal 1-inch-thick wood boards
Minn. R. 1309.0905 subp. 1 amends R905.2.1 to read that asphalt shingles shall be fastened to solidly sheathed decks or 1-inch thick nominal wood boards. Minnesota also deletes R905.2.8.5 in its entirety. Spaced skip sheathing does not meet the rule.
Reference: 2020 Minnesota Residential Code (Minn. R. ch. 1309; 2018 IRC), Minn. R. 1309.0905, subp. 1 (R905.2.1)
Metal lath for exterior plaster in Minnesota is being attached to wood studs under the amended R703.7.1 using nails. Which attachment meets the rule?
Answer: 11 gage nails, 7/16 inch head, at 6 in. o.c. or less, penetrating framing 3/4 inch or more
Minn. R. 1309.0703 subp. 3 (R703.7.1) requires all lath and attachments to be corrosion-resistant, with expanded metal or woven wire lath attached with 11 gage nails having a 7/16 in. head or 16 gage staples, spaced not more than 6 in. on center unless otherwise approved, and penetrating wood framing at least 3/4 in.
Reference: 2020 Minnesota Residential Code (Minn. R. ch. 1309; 2018 IRC), Minn. R. 1309.0703, subp. 3 (R703.7.1)
What flame-spread and smoke-developed limits do IRC R302.9.1 and R302.9.2 set for wall and ceiling finishes in a dwelling?
Answer: Flame spread index not greater than 200 and smoke-developed index not greater than 450
R302.9.1 limits the flame spread index of wall and ceiling finishes to 200 and R302.9.2 limits the smoke-developed index to 450. Exceptions in R302.9.1 cover trim such as picture molds, chair rails, baseboards and handrails, doors and windows or their frames, and materials thinner than 1/28 in.
Reference: 2020 Minnesota Residential Code (Minn. R. ch. 1309; 2018 IRC), IRC R302.9.1 and R302.9.2
Under Minnesota's amended IRC R307.1, which rules govern the installation of plumbing fixtures in a new dwelling?
Answer: Minnesota Rules chapter 4714, the Minnesota Plumbing Code
Minn. R. 1309.0307 amends R307.1 to read that plumbing fixtures shall be installed in accordance with Minnesota Rules chapter 4714. The Minnesota Residential Code deletes the IRC plumbing chapters (except P2904 sprinklers); similarly R303.4 sends mechanical ventilation to chapters 1322 or 1346.
Reference: 2020 Minnesota Residential Code (Minn. R. ch. 1309; 2018 IRC), Minn. R. 1309.0307 (R307.1)
A homeowner builds a one-story detached 160 square foot storage shed and runs electrical service to it. Under Minn. R. 1300.0120, subp. 4, what permits are needed?
Answer: No building permit for the shed, but an electrical permit is still required
Subpart 4 exempts one-story detached accessory structures used as tool and storage sheds or playhouses when the floor area does not exceed 200 sq ft from a building permit. The same subpart states that unless otherwise exempted, plumbing, electrical and mechanical permits are still required for the exempt items, so the wiring needs an electrical permit. Exemption never authorizes code violations.
Reference: Minnesota Rules ch. 1300 (State Building Code administration), Minn. R. 1300.0120, subp. 4
Sources
- DLI Residential Building Contractor, Remodeler, Roofer Examination Guide (06/2020) (opens in a new tab)
- Minnesota DLI: residential building contractor, remodeler and roofer licenses (opens in a new tab)
- Minnesota DLI: license exam schedule (opens in a new tab)
Questions last verified November 9, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.