Requirements at a glance
| Agency | Idaho Division of Occupational and Professional Licenses (DOPL); exam by PSI |
|---|---|
| Exam | 100 questions, 4 hours, 75% to pass; business and law only |
| Book allowed | DOPL Contractor's Business and Law Reference Manual (printed, hole-punched, in a three-ring binder) |
| Fees | $75 per exam to PSI, plus DOPL license fees |
Businesses applying to Idaho DOPL for a plumbing specialty contractor license. The exam covers running the business, not the plumbing code.
Official links
How to get licensed, step by step
Get the manual
Download DOPL's free Contractor's Business and Law Reference Manual, print it, hole-punch it and put it in a three-ring binder.
DOPL: Contractor's Business and Law Reference Manual (PDF) (opens in a new tab)
Register and pay with PSI
Pick the Idaho Plumbing Specialty Contractor exam, pay the $75 fee and book a seat.
Schedule with PSI (Idaho contractor and trade exams) (opens in a new tab)DOPL: plumbing licensing (opens in a new tab)
Pass the exam
Score 75% or higher.
Schedule with PSI (Idaho contractor and trade exams) (opens in a new tab)
Apply to DOPL
Apply through eDOPL for the plumbing specialty contractor license.
DOPL online license application (eDOPL) (opens in a new tab)DOPL: plumbing licensing (opens in a new tab)
How to prepare
- No code book: every question comes from the DOPL manual. Accounting and finance, human resources and insurance are 20 questions each.
- Same outline as Idaho's electrical and HVAC contractor exams, but you need 75%, not 70%.
- Start with the free questions above to find your weak topics, then drill those first.
- Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
- Read every explanation, including for questions you got right, and look the section up in your own book.
Books for this exam
This is an open-book exam: you can bring the references below, and most questions come from the DOPL manual. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.
DOPL Contractor's Business and Law Reference ManualEssential
Free from DOPL. Idaho's public works, electrical, plumbing and HVAC contractor exams are written from it; bring it printed, hole-punched and in a three-ring binder.
Official reference list (as published by the testing agency)
- DOPL Contractor's Business and Law Reference Manual (free PDF; bring it printed, hole-punched and in a three-ring binder). It is the only reference allowed.
What's on the exam
Official content outline from PSI Services (number of questions per topic):
| Topic | Questions | |
|---|---|---|
| Manual Section 1: Business Plan Outline | 1 | |
| Manual Section 2: Developing Professional Relationships | 2 | |
| Manual Section 3: Business Organization | 2 | |
| Manual Section 4: Licensing Information | 2 | |
| Manual Section 5: Accounting and Finance | 20 | |
| Manual Section 6: Human Resources | 20 | |
| Manual Section 7: Insurance | 20 | |
| Manual Section 8: Estimating and Bidding | 7 | |
| Manual Section 9: Contracts | 8 | |
| Manual Section 10: Project Management | 10 | |
| Manual Section 11: Safety | 5 | |
| Manual Section 12: Taxes | 1 | |
| Manual Section 13: Lien Laws | 2 |
Exam day details
- Administered by PSI Services for the Idaho Division of Occupational and Professional Licenses (DOPL).
- Fee: $75 per exam, paid to PSI when you schedule. The fee is good for one year, isn't refundable, and each retake costs it again. DOPL license application fees are separate.
- 100 questions in 4 hours; 75% to pass.
- The outline matches Idaho's electrical and HVAC contractor exams, but the passing score is 75% instead of 70%.
- Bring the manual printed, hole-punched and in a three-ring binder.
- You may highlight, underline and add permanent tabs to your references, but not write in them. Sticky notes and loose papers aren't allowed.
- Your score shows on screen when you finish.
- Cancel or reschedule at least 2 days before your appointment to keep your fee.
Frequently asked questions
What's on the Idaho plumbing specialty contractor exam?
100 questions from DOPL's Contractor's Business and Law Reference Manual: accounting and finance 20, human resources 20, insurance 20, project management 10, contracts 8, estimating and bidding 7, safety 5, lien laws 2, business organization 2, licensing 2, professional relationships 2, business plan 1 and taxes 1.
Is there plumbing code on the specialty contractor exam?
No. The only allowed reference is DOPL's business and law manual. The full plumbing contractor exam adds 40 plumbing code and sizing questions.
Free questions with answers
Show all 10 free questions and answers
A new plumbing contractor wants an accountant who can prepare tax returns, review the accounting system and help gather information for loan applications. According to the manual, which professionals in Idaho are licensed to provide these services?
Answer: Certified Public Accountants and Licensed Public Accountants, regulated by the Idaho State Board of Accountancy
Section 2 says the Idaho State Board of Accountancy licenses and regulates CPAs and LPAs, and lists tax returns, system review and help with loan and credit applications among their services. The other agencies named regulate securities, business filings and insurance.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 2, Section 2: Developing Professional Relationships, Selecting an Accountant
Which statement best describes a limited partner in a limited partnership, according to the manual?
Answer: Contributes capital and shares profits but cannot manage the business and is liable only up to the amount contributed
Section 3 describes general partners as those who control the business and are personally liable, and limited partners as investors who contribute capital and share profits, cannot manage, and risk only their contribution. The second distractor describes an LLP partner and the last describes an S corporation.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 3, Section 3: Business Organization, Limited Partnership
According to the manual, which of the following is one of the four steps a candidate must complete to qualify for a DOPL license?
Answer: Submit the applicable non-refundable fee or fees
Section 4 lists four qualifications: submit the application with supporting documents, submit the non-refundable fee, obtain approval from the State, and pass the examination. Bonds, business plans and association membership are not on the list.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 4, Section 4: Licensing Information, License Qualifications
A plumbing contractor's balance sheet shows current assets of $267,000 and current liabilities of $89,000. Using the manual's formula, what is the current ratio?
Answer: 3.0, found by dividing $267,000 by $89,000
Section 5 defines the current ratio as current assets divided by current liabilities: $267,000 / $89,000 = 3.0. Inverting gives 0.33, subtracting first gives 2.0, and a plain subtraction gives dollars of working capital rather than a ratio.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 5, Section 5: Accounting & Finance, Financial Ratios (Liquidity Ratios)
An Idaho plumbing company is clearing out old time cards and payroll files for former technicians. According to the manual, for at least how long must employee records such as hours worked, hourly rate, overtime pay and wage deductions be kept?
Answer: At least three years
Section 6's recordkeeping requirement says employee records must be kept for a minimum of three years, with no requirement about the manner in which they are kept. The records include name, address, occupation, hours worked, pay rate, overtime pay, deductions and total wages.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 6, Section 6: Human Resources, Idaho Laws, Recordkeeping Requirements
A plumber driving a company van is hurt in a crash, and the company wants coverage for the technician's medical, surgical, hospital and funeral expenses up to a set limit, no matter who was at fault. According to the manual, which automobile coverage does this?
Answer: Medical payments coverage
Section 7 defines medical payments as coverage up to a specified limit for medical, surgical, hospital and funeral expenses regardless of the contractor's liability. Bodily injury liability protects the contractor from the cost of injury to others; collision covers the contractor's own vehicle.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 7, Section 7: Insurance, Automobile Insurance
A homeowner asks a plumbing contractor for a quick ballpark price over the phone before any plans exist. According to the manual, what should the customer be told about this rough quote?
Answer: That it is only preliminary and nonbinding
Section 8 says that in deciding whether to bid, discussing a rough estimate of the total charges can answer some questions, but the customer should be made aware that the rough quote is only preliminary and nonbinding.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 8, Section 8: Estimating & Bidding, Bidding
An original contractor receives retention proceeds from an owner on a private project. Under Idaho Code 29-115 as reproduced in the manual, within how many days must it pay each subcontractor's share of the retention received?
Answer: Within 10 days
Section 9 reproduces subsection (4): within ten days from the time all or any portion of the retention proceeds are received by the original contractor, it must pay each subcontractor from whom retention was withheld its share, unless a bona fide dispute exists. The 35-day period applies to the owner's release of retention.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 9, Section 9: Contracts, Contract Legalities, Idaho Code 29-115(4)
A plumbing job has demolition (2 days), then two tasks that can run at the same time after demolition: gas piping (4 days) and water piping (6 days). Both must be finished before startup and testing (2 days) can begin. Using the critical path method as the manual describes it, what is the shortest time to complete the project?
Answer: 10 days, following demolition, water piping and startup and testing
The critical path is the sequence of activities that adds up to the longest overall duration, and it sets the shortest possible time to complete the project. Demolition 2 + water piping 6 + startup 2 = 10 days; the gas piping path (2 + 4 + 2 = 8 days) has 2 days of float.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 10, Section 10: Project Management in Construction, Planning, Critical Path Method (CPM)
A plumbing crew is setting roof vent flashings near an unprotected roof edge that is 14 feet above the ground. According to the manual's summary of OSHA construction fall protection rules, which systems may the employer select to protect workers exposed to a fall of 6 feet or more from an unprotected side or edge?
Answer: A guardrail system, a safety net system or a personal fall arrest system
Section 11 summarizes 29 CFR 1926.501(b)(1): where employees are exposed to a fall of 6 feet (1.8 m) or more from an unprotected side or edge, the employer must select a guardrail system, safety net system or personal fall arrest system. The manual adds that body belts used for fall arrests are prohibited.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 11, Section 11: Safety, Section 11: Safety, Construction Industry Digest (Fall Protection)
Sources
- Idaho DOPL: Combined PSI Candidate Bulletin (effective 12.10.2025, PDF) (opens in a new tab)
- Idaho DOPL: Plumbing licensing (opens in a new tab)
- Idaho DOPL: Contractor's Business and Law Reference Manual (PDF) (opens in a new tab)
- PSI: Idaho contractor and trade exams (candidate bulletins) (opens in a new tab)
Questions last verified October 27, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.