Requirements at a glance
| Agency | Idaho Division of Occupational and Professional Licenses (DOPL); exam by PSI |
|---|---|
| Exam | 100 questions, 4 hours, 70% to pass; business and law only |
| Book allowed | DOPL Contractor's Business and Law Reference Manual (printed, hole-punched, in a three-ring binder) |
| Fees | $75 per exam to PSI, plus DOPL license fees |
Electrical businesses applying to Idaho DOPL for an electrical contractor or limited electrical contractor license. The exam covers running the business; the NEC is tested on the master, journeyman and limited installer exams.
Official links
How to get licensed, step by step
Get the manual
Download DOPL's free Contractor's Business and Law Reference Manual, print it, hole-punch it and put it in a three-ring binder.
DOPL: Contractor's Business and Law Reference Manual (PDF) (opens in a new tab)
Register and pay with PSI
Pick the Idaho Electrical Contractor exam, pay the $75 fee and book a seat.
Schedule with PSI (Idaho contractor and trade exams) (opens in a new tab)DOPL: electrical program information and exams (opens in a new tab)
Pass the exam
Score 70% or higher.
Schedule with PSI (Idaho contractor and trade exams) (opens in a new tab)
Apply to DOPL
Apply through eDOPL for the electrical contractor (or limited electrical contractor) license.
DOPL online license application (eDOPL) (opens in a new tab)DOPL: electrical program information and exams (opens in a new tab)
How to prepare
- No code book: every question comes from the DOPL manual. Accounting and finance, human resources and insurance are 20 questions each.
- One exam covers both the electrical contractor and the limited electrical contractor license.
- It's the same outline as the public works and HVAC contractor exams, but the scores don't transfer.
- Start with the free questions above to find your weak topics, then drill those first.
- Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
- Read every explanation, including for questions you got right, and look the section up in your own book.
Books for this exam
This is an open-book exam: you can bring the references below, and most questions come from the DOPL manual. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.
DOPL Contractor's Business and Law Reference ManualEssential
Free from DOPL. Idaho's public works, electrical, plumbing and HVAC contractor exams are written from it; bring it printed, hole-punched and in a three-ring binder.
Official reference list (as published by the testing agency)
- DOPL Contractor's Business and Law Reference Manual (free PDF; bring it printed, hole-punched and in a three-ring binder). It is the only reference allowed.
What's on the exam
Official content outline from PSI Services (number of questions per topic):
| Topic | Questions | |
|---|---|---|
| Manual Section 1: Business Plan Outline | 1 | |
| Manual Section 2: Developing Professional Relationships | 2 | |
| Manual Section 3: Business Organization | 2 | |
| Manual Section 4: Licensing Information | 2 | |
| Manual Section 5: Accounting and Finance | 20 | |
| Manual Section 6: Human Resources | 20 | |
| Manual Section 7: Insurance | 20 | |
| Manual Section 8: Estimating and Bidding | 7 | |
| Manual Section 9: Contracts | 8 | |
| Manual Section 10: Project Management | 10 | |
| Manual Section 11: Safety | 5 | |
| Manual Section 12: Taxes | 1 | |
| Manual Section 13: Lien Laws | 2 |
Exam day details
- Administered by PSI Services for the Idaho Division of Occupational and Professional Licenses (DOPL).
- Fee: $75 per exam, paid to PSI when you schedule. The fee is good for one year, isn't refundable, and each retake costs it again. DOPL license application fees are separate.
- 100 questions in 4 hours; 70% to pass. The same exam is given for the electrical contractor and the limited electrical contractor license.
- The topic weights are the same as Idaho's public works and HVAC contractor exams, but DOPL says scores don't transfer between licenses: you take the exam again for each.
- Bring the manual printed, hole-punched and in a three-ring binder.
- You may highlight, underline and add permanent tabs to your references, but not write in them. Sticky notes and loose papers aren't allowed.
- Your score shows on screen when you finish.
- Cancel or reschedule at least 2 days before your appointment to keep your fee.
Frequently asked questions
What's on the Idaho electrical contractor exam?
100 questions from DOPL's Contractor's Business and Law Reference Manual: accounting and finance 20, human resources 20, insurance 20, project management 10, contracts 8, estimating and bidding 7, safety 5, lien laws 2, business organization 2, licensing 2, professional relationships 2, business plan 1 and taxes 1.
Is the NEC on the electrical contractor exam?
No. The only allowed reference is DOPL's business and law manual. The NEC is tested on the master, journeyman and limited installer exams.
Is there a separate limited electrical contractor exam?
No. DOPL's December 2025 PSI bulletin lists one Electrical Contractor/Limited Electrical Contractor exam with the same 100-question outline.
Free questions with answers
Show all 10 free questions and answers
Under the DOPL manual, which statement about a limited partnership (L.P.) is correct?
Answer: General partners manage and are personally liable for its debts; limited partners contribute capital but cannot manage
Section 3 explains that an L.P. has one or more general partners who control the business and bear personal liability, and limited partners who contribute capital and share profits but cannot manage and are liable only for their contribution. A new Idaho L.P. files a Certificate of Limited Partnership with the Secretary of State.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 3, Section 3: Business Organization, Limited Partnership
A contractor's balance sheet shows current assets of $184,000 and current liabilities of $46,000. Using the DOPL manual's liquidity formulas, what is the current ratio?
Answer: 4.0, found by dividing $184,000 by $46,000
Section 5 defines the current ratio as current assets divided by current liabilities: $184,000 / $46,000 = 4.0. Inverting the fraction gives 0.25 and subtracting gives a dollar amount, not a ratio.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 5, Section 5: Accounting & Finance, Financial Ratios (Liquidity Ratios)
Under the DOPL manual's summary of the Family and Medical Leave Act, which employers are covered, and how much leave may an eligible employee take in a 12-month period?
Answer: Employers with 50 or more employees within 75 miles; up to twelve workweeks of unpaid, job-protected leave per year
Section 6 says the FMLA affects companies with 50 or more employees in a 75-mile radius and entitles eligible employees to twelve workweeks of unpaid, job-protected leave in a 12-month period for specified family and medical reasons. The appendix lists FMLA at 50 or more employees.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 6, Section 6: Human Resources, Family and Medical Leave Act (FMLA); Appendix
An uninsured subcontractor's employee is injured on an Idaho job. According to the DOPL manual's workers' compensation discussion, who may the injured worker collect benefits from?
Answer: The general contractor, since an uninsured subcontractor's worker may collect benefits from it
Section 7 states that an injured worker of an uninsured subcontractor may collect workers' compensation benefits from the general contractor, and that there is no public safety net for employees of uninsured employers; the worker's recourse is against the uninsured employer personally.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 7, Section 7: Insurance, Worker's Compensation Insurance
In the DOPL manual's discussion of public works bidding, what is true of an open (hard) bid?
Answer: All bidders use the same proposal form, the quoted price is final, and bids are opened and read aloud publicly
Section 8 explains that an open (hard) bid is the most common competitive bid: all competitors use the same proposal form, the price quoted is final and no adjustments are allowed, and bids are read publicly. A closed bid has no standard form, is not read publicly, and lets the owner negotiate.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 8, Section 8: Estimating & Bidding, Bidding
In the DOPL manual's list of what makes a contract legally valid, what does mutuality of obligation (a 'meeting of the minds') mean?
Answer: The parties agree to the same thing, in the same sense, at the same time
Section 9 lists offer and acceptance, consideration, parties, mutuality of obligation and legal purpose. Mutuality is the mutual understanding and assent to the expression of the agreement. The other choices describe consideration, parties and legal purpose.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 9, Section 9: Contracts (elements of a valid contract)
In the critical path method described in the DOPL manual, which tasks are 'critical'?
Answer: Those on the longest sequence of activities, which sets the shortest possible project duration
Section 10 says CPM calculates the longest path of planned activities to the end of the project; the sequence adding up to the longest overall duration is the critical path and fixes the shortest time in which the project can be completed. Tasks off that path have float (slack).
Reference: DOPL Contractor's Business and Law Reference Manual, Section 10, Section 10: Project Management in Construction, Planning (Critical Path Method)
Under the OSHA excavation rules in the manual's digest, at what depth is an adequate protective system required in soil (not stable rock), unless a competent person finds no indication of a potential cave-in in a shallower cut?
Answer: At 5 feet or deeper, with an adequate protective system for each exposed employee
29 CFR 1926.652(a)(1) requires protection from cave-ins except in stable rock, or in excavations less than 5 feet deep where a competent person's examination shows no potential for cave-in. Trenches 4 feet or deeper still need a means of egress (1926.651(c)(2)).
Reference: DOPL Contractor's Business and Law Reference Manual, Section 11 (29 CFR 1926.652(a)(1)), 29 CFR 1926.652(a)(1), Requirements for protective systems
Which Idaho agency does the DOPL manual say licenses and regulates Certified Public Accountants and Licensed Public Accountants?
Answer: Idaho State Board of Accountancy
Section 2 (Selecting an Accountant) names the Idaho State Board of Accountancy as the regulator of CPAs and LPAs and suggests calling it or checking its website for a list of licensed accountants. The Department of Insurance regulates insurance, and the Department of Finance handles securities.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 2, Section 2: Developing Professional Relationships, Selecting an Accountant
According to the DOPL manual, which of these is one of the boards hosted by the Division of Occupational and Professional Licenses?
Answer: Public Works Contractors License Board
Section 4 lists seven boards under DOPL, including the Idaho Building Code Board, Electrical Board, HVAC Board, Plumbing Board, Manufactured Housing Board, Modular Building Advisory Board and the Public Works Contractors License Board. The other names are not on the manual's list.
Reference: DOPL Contractor's Business and Law Reference Manual, Section 4, Section 4: Licensing Information, Mission
Sources
- Idaho DOPL: Combined PSI Candidate Bulletin (effective 12.10.2025, PDF) (opens in a new tab)
- Idaho DOPL: Electrical program information and exams (opens in a new tab)
- Idaho DOPL: Contractor's Business and Law Reference Manual (PDF) (opens in a new tab)
- PSI: Idaho contractor and trade exams (candidate bulletins) (opens in a new tab)
Questions last verified October 27, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.