California licensing exam

California Contractor Law and Business Exam: Practice Test & Licensing Guide

The CSLB Law and Business exam every California contractor qualifier must pass: licensing, finances, employment, insurance and liens, contracts, public works and safety. Closed book.

Questions
Not published by California
Time limit
3.5 hours
Passing score
Not published by California
Books
Closed book
What to study ↓

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10Business Organization and Licensing

An unlicensed handyman offers to replace a damaged fence section for a homeowner for $900 total, including labor and materials. No building permit is needed, he works alone, and he has not advertised as a contractor. Under the minor-work exemption, what is true?

Requirements at a glance

Who takes itThe qualifier on every new California contractor license
FormatClosed book, 4-choice, 3.5 hours; question count and pass score not published
ReferenceCSLB's California Contractors License Law and Reference Book (free from CSLB)
Fee$450 CSLB application fee, plus $51.43 per exam sitting paid to PSI

The qualifier on every new California contractor license, in every classification. It is taken together with the trade exam for your classification.

How to get licensed, step by step

  1. Read CSLB's Law and Business study guide

    It lists the seven sections and the laws behind them: business organization and licensing, finances, employment, insurance and liens, contracts, public works and safety.

    CSLB: Examination study guides (opens in a new tab)

  2. Learn the contractor law

    Many questions trace to the Contractors License Law (Business and Professions Code) and CSLB's rules, which CSLB collects in its Law and Reference Book.

    California Contractors State License Board (CSLB) (opens in a new tab)

  3. Schedule with PSI

    Once CSLB refers you to test, schedule Law and Business with your trade exam. Both must be passed within 18 months.

    PSI: schedule your CSLB exam (877-392-6422) (opens in a new tab)

How to prepare

  • The CSLB exams are closed book and CSLB doesn't publish question counts or the passing score, so aim for steady scores well above 80% on our practice tests rather than a bare minimum.
  • Use CSLB's free study guide for your classification: it lists the sections, approximate weights and the references the questions come from.
  • Every license needs two exams (Law and Business plus the trade exam). Pass both within 18 months of CSLB accepting your application.
  • Contract requirements (about 21%) and employment (about 20%) are the biggest sections: know the home improvement contract rules, payroll and workers' compensation basics.
  • Business finances is about 15%: practice markup vs. margin, overhead, cash flow and job-cost math.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

What to study

This is a closed-book exam, so nothing comes into the exam room. Study from these:

Official reference list (as published by the testing agency)
  • California Contractors License Law and Reference Book (CSLB; the 2025 edition was reviewed, a 2026 edition exists)
  • EDD publication DE 44, California Employer's Guide
  • California Labor Code and Financial Code (PACE) sections covered in CSLB's Law and Business study guide
  • Business and Professions Code Division 3 Chapter 9 and CCR Title 16 Division 8 (contractor law and rules)

What's on the exam

Official content outline from PSI Services (number of questions per topic):

TopicQuestions
Business Organization and Licensing13
Business Finances15
Employment Requirements20
Insurance and Liens12
Contract Requirements and Execution21
Public Works5
Safety14

Exam day details

  • Administered by PSI Services for the California Contractors State License Board (CSLB).
  • Fee: $450 CSLB application fee (one classification), paid to CSLB. Separately, each exam sitting costs $51.43, paid directly to PSI (a retake costs it again, after a 21-day wait). Cancel or reschedule at least 2 days ahead to keep your fee. The $200 or $350 initial license fee and the $25,000 bond come after you pass.
  • Closed book: no code books, notes or calculators from home. PSI provides a calculator, and every question has four choices with no penalty for guessing.
  • You get 3.5 hours per exam and see your result on screen. A failing report breaks your performance down by section.
  • Every license needs two exams: Law and Business plus the trade exam for the classification (C-61 has no trade exam). You must pass both within 18 months of CSLB accepting your application, and passing results stay good for 5 years.
  • The qualifier needs 4 years of journey-level experience within the last 10 years. Each exam sitting costs $51.43 paid to PSI, and you must cancel or reschedule at least 2 days before the appointment to keep the fee.
  • Work worth $500 or more (labor and materials) requires a California contractor license.

Note: CSLB does not publish the number of questions or the passing score for its exams. The 100-question practice length is ours, and the pass line shown in our practice tests is only a study target. Check CSLB's study guide and the PSI bulletin for current details.

Frequently asked questions

What's on the California Law and Business exam?

CSLB's study guide gives approximate weights: contract requirements and execution 21%, employment requirements 20%, business finances 15%, safety 14%, business organization and licensing 13%, insurance and liens 12% and public works 5%.

Do I still take Law and Business if I already hold a California license?

Usually yes for a new license. CSLB can waive the trade exam only for a qualifier with prior history in the same classification (Business and Professions Code 7065.1 to 7065.3). Ask CSLB about your situation.

How many questions are on the exam and what score do I need?

CSLB doesn't publish either number, so we don't state them. Each exam is closed book with 4-choice questions and 3.5 hours to finish. Your result appears on screen, and a failing report shows how you did by section.

Free questions with answers

Show all 10 free questions and answers
  1. An unlicensed handyman offers to replace a damaged fence section for a homeowner for $900 total, including labor and materials. No building permit is needed, he works alone, and he has not advertised as a contractor. Under the minor-work exemption, what is true?

    Answer: It is exempt, because the price is under $1,000 with no permit, employees or advertising

    B&P 7048(a) exempts a casual, minor project whose aggregate price for labor, materials and all other items is less than $1,000 and that needs no building permit. Under 7048(c) the exemption is lost if the person advertises as a contractor or employs anyone to help. The older $500 figure was raised to $1,000 effective January 1, 2025, and no waiver by the owner can create an exemption.

    Reference: California Contractors License Law and Reference Book (2025), B&P Code 7048

  2. A contractor has current assets of $300,000, of which $120,000 is inventories, and current liabilities of $150,000. Using the simple method of subtracting inventories from current assets, what is the quick ratio?

    Answer: 1.20

    Quick assets are current assets minus inventories: $300,000 - $120,000 = $180,000. Quick ratio = $180,000 / $150,000 = 1.20. The 2.00 answer is the current ratio ($300,000 / $150,000), which wrongly leaves inventories in; 0.80 divides inventories by liabilities.

    Reference: California Contractors License Law and Reference Book (2025), Section III, Chapter 3, Financial Analysis and Ratios (Quick Ratio)

  3. A corporation's balance sheet lists total assets of $520,000 and total liabilities of $335,000. What is the stockholders' equity?

    Answer: $185,000

    Both sides of the balance sheet are always equal: assets = liabilities + stockholders' equity. Equity is therefore $520,000 - $335,000 = $185,000. Adding the two figures gives $855,000, which is not a balance sheet relationship. Equity (net worth) is the owners' claim on the assets, including retained earnings.

    Reference: California Contractors License Law and Reference Book (2025), Section III, Chapter 3, Balance Sheet

  4. A contractor hires one part-time helper for a few hours each week. What is the contractor's workers' compensation obligation?

    Answer: Insurance is required, because any employer with one or more employees, even part-time, must be covered

    If the employer has one or more employees, even part-time, the employer must insure for workers' compensation claims. This duty also extends to employed relatives on the same basis as other employees. Coverage may be a standard approved policy, a permit to self-insure, or participation in a recognized collectively bargained alternative dispute resolution program.

    Reference: California Contractors License Law and Reference Book (2025), Section III, Chapter 3, Workers' Compensation Insurance (Employer Liability)

  5. After an employee files a claim form for an alleged work injury, within what time must the employer authorize treatment, and what is the employer's treatment liability until the claim is accepted or rejected?

    Answer: Within one working day, with liability for treatment limited to $10,000

    The Law Book states that within one working day of receiving the employee's claim form the employer must authorize treatment for the alleged industrial injury and continue it until liability is accepted or rejected. Until that date, liability for medical treatment is limited to $10,000 (Labor Code 4600, 4604.5, 5402). The other time periods and dollar limits are not those in the statute.

    Reference: California Contractors License Law and Reference Book (2025), Section III, Chapter 3, Benefits to Which Workers May Be Entitled (Medical Treatment); Labor Code 5402

  6. Which type of bond assures the property owner that no liens for labor and materials will be filed against the property?

    Answer: A payment bond

    A payment bond protects the owner against liens for unpaid labor and materials and gives claimants the right to recover on the bond. A performance bond guarantees completion of the project according to plans and specifications. A contract bond guarantees both. The license bond covers any project the licensee performs, up to its penal sum, and is a licensing requirement.

    Reference: California Contractors License Law and Reference Book (2025), Section III, Chapter 3, Establishing Your Business (Bonds)

  7. A contractor signs a home improvement contract for $6,000 and wants the largest downpayment the law allows. What is the maximum downpayment?

    Answer: $600

    B&P 7159.5(a)(3) caps the downpayment at $1,000 or 10 percent of the contract amount, whichever is less. Ten percent of $6,000 is $600, which is less than $1,000, so $600 is the maximum. $1,000 would apply only if 10 percent of the price were more than $1,000 (a contract above $10,000).

    Reference: California Contractors License Law and Reference Book (2025), B&P Code 7159.5(a)(3)

  8. A person with no contractor license submits a bid to a city for a street repair project that is not governed by an exception in the Public Contract Code. What does B&P 7028.15 provide?

    Answer: The unlicensed bid is a misdemeanor

    B&P 7028.15(a) makes it a misdemeanor for any person to submit a bid to a public agency to engage in contracting without a license, except where the person is exempt from the chapter or the bid is on a project governed by Public Contract Code 10164 (state) or 20103.5 (local agency). A prior conviction brings a fine of 20 percent of the contract price or $4,500 (whichever is greater), or jail, or both.

    Reference: California Contractors License Law and Reference Book (2025), B&P Code 7028.15

  9. An excavator plans to dig a trench to install a water line. Under Government Code 4216, how far ahead must the regional notification center (811) be contacted?

    Answer: At least two working days, but no more than 14 calendar days, before beginning

    Government Code 4216 through 4216.9 require anyone planning to excavate to contact the regional notification center (811) at least two working days, but not more than 14 calendar days, before starting, except in emergencies. The center issues an inquiry identification (ticket) number, and an excavation permit is not valid without it. Violations can lead to fines and license discipline.

    Reference: California Contractors License Law and Reference Book (2025), Section IV, Chapter 4, Regional Notification Centers; Gov. Code 4216-4216.9

  10. An excavator's crew damages an underground water line while digging. Within what time must the excavator notify the regional notification center of the damage?

    Answer: Within 48 hours of discovering or causing the damage

    An excavator must notify the regional notification center within 48 hours of discovering or causing damage to a subsurface installation. Negligent violations of the underground-facility law carry fines up to $10,000, knowing and willful violations up to $50,000, and violations causing a pipeline release up to $100,000, and may lead to license discipline.

    Reference: California Contractors License Law and Reference Book (2025), Section IV, Chapter 4, Regional Notification Centers (Penalties)

Sources

Questions last verified October 26, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.