Oklahoma licensing exam

Oklahoma Mechanical Business and Law Exam: Practice Test & Licensing Guide

The PSI business and law portion for an Oklahoma mechanical (HVACR) contractor license: 50 scored questions on bidding, contracts, finance, payroll, risk and licensing rules. Open book, 70% to pass.

Questions
50
Time limit
2 hours
Passing score
70%

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10Licensing Requirements

A contractor applicant passes the business and law portion but fails the trade portion. Under OAC 158:50-9-1(c)(2), what must the applicant do to qualify?

Requirements at a glance

AgencyOklahoma Construction Industries Board (CIB); exams by PSI
ExperienceRequired for the mechanical (HVACR) contractor license, in addition to the trade exam
Exam50 scored questions, 2 hours, 70% (35)
Books allowedNASCLA Contractors Guide (Basic, 14th Edition), OAC 158:50 and 158:10, 59 O.S. ch. 43A, 42 O.S. ch. 3 (liens), 85A O.S. ch. 1
Fee$92 to PSI per exam portion (non-refundable), plus CIB application and license fees
Retest30 days after a fail; 90 days after each later fail (electrical is always 30)

HVACR, sheet metal, refrigeration and other mechanical contractor applicants in Oklahoma, in addition to the trade exam.

How to get licensed, step by step

  1. Register and log your hours

    Register with the CIB as an apprentice and log your hours under a licensed contractor (1 year is 2,000 hours). Have your employer's affidavits notarized.

    Oklahoma Construction Industries Board (CIB) (opens in a new tab)

  2. Apply to the CIB

    Send the CIB your application and notarized experience affidavits. When it approves you, you receive an Ok Con ID.

    Oklahoma Construction Industries Board (CIB) (opens in a new tab)

  3. Schedule with PSI

    Book your exam with PSI online or at (855) 834-8750. Contractor applicants also take the Business and Law portion.

    Schedule with PSI (Oklahoma contractor exams) (opens in a new tab)PSI: Oklahoma CIB Candidate Information Bulletin (effective 9/11/2026) (opens in a new tab)

  4. Pass and get licensed

    After you pass, send the CIB your results and license fee to receive your license.

    Oklahoma Construction Industries Board (CIB) (opens in a new tab)

How to prepare

  • All Oklahoma trade exams are open book, so the skill is finding answers fast: bound books, permanent tabs only, highlighting allowed, no writing.
  • Bring a silent, non-programmable calculator. The exam adds up to 10 unscored experimental questions that count against your time.
  • Bidding and estimating (10) and financial (8) are over a third of the exam: markup, overhead, margin and cash-flow math.
  • Licensing requirements (6) come from the Mechanical Licensing Act and OAC 158:50; the CIB study-aids book is free and allowed.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

Books for this exam

This is an open-book exam: you can bring the references below, and most questions come from the NASCLA guide and the CIB rules book. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.

Official reference list (as published by the testing agency)
  • NASCLA Contractors Guide to Business, Law and Project Management, Basic 14th Edition
  • Oklahoma Lien Law, 42 O.S. Chapter 3
  • Oklahoma Workers' Compensation Act, 85A O.S. Chapter 1 (or the CIB statutory excerpts)
  • CIB Unofficial Administrative Rules & Courtesy Exam Study Aids Book, current edition (free from the CIB)
  • Oklahoma Fine Schedule, OAC Title 158, Chapter 10
  • Oklahoma Mechanical Industry Regulations, OAC Title 158, Chapter 50
  • Oklahoma Mechanical Licensing Act, 59 O.S. Chapter 43A

What's on the exam

Official content outline from PSI Services (number of questions per topic):

TopicQuestions
Bidding and Estimating10
Project Management and Supervision7
Contracts5
Financial8
Labor and Personnel5
Risk Management4
Payroll and Payroll Taxes5
Licensing Requirements6

Exam day details

  • Administered by PSI Services for the Oklahoma Construction Industries Board (CIB).
  • Fee: $92 to PSI per exam portion, non-refundable. CIB application and license fees are separate.
  • 50 scored questions in 2 hours (120 minutes); 35 correct (70%) to pass.
  • If you fail, wait 30 days to retest; after each later failure the wait is 90 days.
  • Open book: bring your own bound copies of the allowed references. You may highlight, underline and index them beforehand with permanent tabs only; no writing and no sticky notes.
  • PSI may add up to 10 unscored experimental questions, which count against your time. A silent, non-printing, non-programmable calculator is allowed.
  • The CIB must approve your application first (you receive an Ok Con ID) before you can schedule with PSI.

Frequently asked questions

What's on the Oklahoma mechanical business and law exam?

50 scored questions: bidding and estimating 10, financial 8, project management and supervision 7, licensing requirements 6, contracts, labor and personnel and payroll and payroll taxes 5 each, and risk management 4.

Is it the same as the electrical business and law exam?

The blueprint is identical. The reference list differs only in the trade licensing law: OAC 158:50 and the Mechanical Licensing Act instead of OAC 158:40 and the Electrical License Act.

Free questions with answers

Show all 10 free questions and answers
  1. A contractor applicant passes the business and law portion but fails the trade portion. Under OAC 158:50-9-1(c)(2), what must the applicant do to qualify?

    Answer: Retake only the trade portion, within three years of the approval to test

    A contractor applicant must pass both portions. If only one portion is passed, the applicant retakes just the failed portion if that happens within three years of the approval date; after that both portions must be retaken.

    Reference: OAC 158:50 (Mechanical Industry Regulations), OAC 158:50-9-1(c)(2)

  2. A contractor's direct cost for a job is $40,000. The company wants a 25% markup on cost. What is the selling price?

    Answer: $50,000

    Markup is a percentage of cost: 40,000 x 1.25 = 40,000 + 10,000 = $50,000. $53,333 comes from treating 25% as a margin on price (40,000 / 0.75). $32,000 comes from dividing by 1.25, and $10,000 is only the markup amount, not the price.

    Reference: General business practice: bid pricing, Markup on cost

  3. What is the purpose of a submittal on a mechanical project?

    Answer: To give the engineer manufacturer data on proposed equipment for approval before it is ordered

    Submittals such as equipment data sheets, shop drawings and sample materials show that what the contractor plans to install meets the contract documents. Ordering equipment before approval risks having to replace it at the contractor's cost.

    Reference: General business practice: project management, Submittals

  4. The owner asks the contractor to add three more exhaust fans after the contract is signed. What should the contractor do before starting the added work?

    Answer: Get a signed written change order stating the added price and any schedule change

    A change order is the written agreement that changes the contract's scope, price or time. Doing extra work on a verbal request invites disputes over whether the work was authorized and what it should cost.

    Reference: General business practice: project management, Change orders

  5. Under Oklahoma's mechanics' lien law, an original contractor who dealt directly with the owner must file the lien statement with the county clerk within how long after the last labor was performed or material furnished?

    Answer: Four months

    42 O.S. 142 requires the original contractor's lien statement to be filed in the county where the land is located within four months after material or equipment was last furnished or labor last performed. The 90-day period belongs to subcontractors under Section 143, and one year is the time allowed to sue after the filing.

    Reference: Oklahoma Mechanics and Materialmen's Liens, 42 O.S. Chapter 3, 42 O.S. 142

  6. A contractor's balance sheet shows current assets of $180,000 and current liabilities of $120,000. What is the current ratio?

    Answer: 1.5

    Current ratio = current assets / current liabilities = 180,000 / 120,000 = 1.5. Inverting the fraction gives 0.67, and $60,000 is the working capital (180,000 - 120,000), a dollar amount rather than a ratio.

    Reference: General business practice: financial management, Current ratio

  7. A company has current assets of $180,000 and current liabilities of $120,000. What is its working capital?

    Answer: $60,000

    Working capital = current assets - current liabilities = 180,000 - 120,000 = $60,000. Adding the two gives $300,000, 1.50 is the current ratio, and $120,000 is the liabilities alone.

    Reference: General business practice: financial management, Working capital

  8. Under the federal Fair Labor Standards Act, how must a covered non-exempt employee be paid for hours worked over 40 in a workweek?

    Answer: At least one and one-half times the regular rate of pay

    29 U.S.C. 207(a) requires overtime at not less than one and one-half times the regular rate for hours over 40 in a workweek. It is not averaged over two weeks, and a company cannot agree with a non-exempt employee to waive it.

    Reference: Fair Labor Standards Act, 29 U.S.C. 201 et seq., 29 U.S.C. 207(a)

  9. On a construction site, one worker is hospitalized as an in-patient for treatment after an accident. Under OSHA's recordkeeping rule, by when must the employer report it to OSHA?

    Answer: Within 24 hours of learning of it

    29 CFR 1904.39(a)(2) requires an employer to report to OSHA within 24 hours any work-related in-patient hospitalization, amputation or loss of an eye. A work-related fatality must be reported within 8 hours under 1904.39(a)(1). The 7-day period applies to entering a recordable case on the log, not to reporting it.

    Reference: 29 CFR 1904 (OSHA recordkeeping), 29 CFR 1904.39(a)

  10. A technician is paid gross wages of $1,250 for one week. What is the total FICA tax (employee plus employer share) on those wages, using 7.65% for each side?

    Answer: $191.25

    Employee share = 1,250 x 0.0765 = $95.63 (6.2% = $77.50, 1.45% = $18.13), and the employer pays a matching share. Total = 1,250 x 0.153 = $191.25. $95.63 counts one side only, $155.00 is Social Security on both sides without Medicare, and $77.50 is the employee's Social Security alone.

    Reference: IRS Publication 15 (Employer's Tax Guide), Social security and Medicare taxes

Sources

Questions last verified November 3, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.