New Jersey licensing exam

New Jersey Locksmith Exam: Practice Test & Licensing Guide

The PSI exam for a New Jersey locksmith license: 50 questions on cylinders, exit hardware, lock functions, lock opening, keys and keying, code cutting, combination locks and access control. Open book, 70% to pass.

Questions
50
Time limit
2.75 hours
Passing score
70%

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10Barrier Free Requirement

Under Section 404.2.6 of ICC A117.1-2017, what is the maximum operational force allowed to retract the latch on accessible door hardware that operates by a rotational motion, such as a lever handle or thumb-turn?

Requirements at a glance

AgencyFire Alarm, Burglar Alarm and Locksmith Advisory Committee (Division of Consumer Affairs); exams by PSI
EligibilitySee N.J.A.C. 13:31A and the Committee's application
ExamsLocksmith, plus Business and Law
Fees$84 to PSI (Business and Law is $47), plus Board application and license fees

Candidates for a New Jersey locksmith license from the Fire Alarm, Burglar Alarm and Locksmith Advisory Committee.

How to get licensed, step by step

  1. Apply to the board

    Get the Board's approval to test. It sends an Examination Eligibility Notice with instructions for paying and scheduling.

    New Jersey Division of Consumer Affairs: professional boards (opens in a new tab)

  2. Schedule the locksmith exam and Business and Law with PSI

    Pay and schedule with PSI online or at (855) 340-3713. First-time candidates take all required exams on the same day. Fees are not refundable or transferable and are valid for one year.

    Schedule with PSI (NJ fire alarm, burglar alarm and locksmith) (opens in a new tab)

  3. Retake if needed

    Retake only the exams you failed, after the waiting period your board sets (6 months between attempts for most boards). Check your Eligibility Notice for the exact limits.

    Schedule with PSI (NJ fire alarm, burglar alarm and locksmith) (opens in a new tab)

  4. Get licensed

    PSI sends your results to the board. Contact the board for the license application, fees and insurance requirements.

    New Jersey Division of Consumer Affairs: professional boards (opens in a new tab)

How to prepare

  • Bring the exact editions on PSI's outline, and check the bulletin again before test day. New Jersey adopted newer codes in August 2026, but the exam bulletins still name the 2023 NEC, the 2021 National Standard Plumbing Code and the 2021 IMC and IFGC.
  • First-time candidates take all required exams on the same day, so practice the trade exam and Business and Law together.
  • You can highlight, underline and index books you bring, but not write in them. The 2023 NEC is provided at the electrical and alarm test centers.
  • The ten sections are weighted equally (5 questions each): tab The Complete Book of Locks and Locksmithing by topic.
  • Bring an NTC Blue Book (2025), A117.1-2017 and the Barrier Free Subcode too; PSI provides only the NEC.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

Books for this exam

This is an open-book exam: you can bring the references below, and most questions come from the 2023 NEC and the NTC Blue Book and the Complete Book of Locks and Locksmithing. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.

Official reference list (as published by the testing agency)
  • NFPA 70: National Electrical Code (NEC), 2023 Edition (provided at the test center; you can't use your own copy)
  • NTC Blue Book: Security System Design and Installation, 2025 print, or NTC Blue Book: Low Voltage Systems Handbook, 2025 (bring your own; the 2020 edition is no longer allowed)
  • ICC/ANSI A117.1-2017, Accessible and Usable Buildings and Facilities (earlier editions may be used until January 1, 2027)
  • New Jersey Administrative Code, Barrier Free Subcode (N.J.A.C. 5:23-7)
  • The Complete Book of Locks and Locksmithing, Sixth Edition, 2005, McGraw-Hill (bring your own)

What's on the exam

Official content outline from PSI Services (number of questions per topic):

TopicQuestions
Barrier Free Requirement5
Cylinder Servicing, High Security Cylinders, and Wafer Tumbler Cylinders5
Exit Hardware and Door Closers5
Lock Set Functions and Installations5
Lock Opening Techniques5
Keys and Keying5
Lock Codes and Code Cutting Equipment5
Combination Locks5
Access Control5
Electronic Systems5

Exam day details

  • Administered by PSI Services for the New Jersey Division of Consumer Affairs boards.
  • Fee: $84 to PSI. Committee application and license fees are separate.
  • 50 questions in 165 minutes; 35 correct (70%) to pass.
  • Locksmithing services means modifying, repairing, installing or servicing locks and related devices and electronic security systems. Installing a prefabricated lock set and door knob into a resident's door is not included.
  • First-time candidates take all three required exams on the same day.
  • Committee exams: if you fail on the first attempt, retake the failed exam(s) within 24 months of your first test date, and wait 6 months before a third attempt. You must pass within three attempts and take the first attempt within 6 months of your eligibility date; otherwise you retake all three.
  • Your board (or committee) must approve your application first and sends an Examination Eligibility Notice. Then you pay and schedule with PSI by phone at (855) 340-3713 or online.
  • Exam fees are not refundable or transferable and are valid for one year from payment.
  • References may be highlighted, underlined and indexed before the exam but not written in; loose or attached papers are not allowed. A book PSI provides at the test center can't be marked.

Frequently asked questions

What's on the New Jersey locksmith exam?

50 questions, five each on barrier free requirements, cylinder servicing and high security cylinders, exit hardware and door closers, lock set functions, lock opening techniques, keys and keying, lock codes and code cutting equipment, combination locks, access control and electronic systems.

Which books does it use?

The 2023 NEC (provided at the test center), an NTC Blue Book (2025), ICC A117.1-2017, the New Jersey Barrier Free Subcode and The Complete Book of Locks and Locksmithing, 6th Edition (2005). You bring everything except the NEC.

Is the exam open book?

Yes. You may highlight, underline and index the books you bring, but not write in them.

Free questions with answers

Show all 10 free questions and answers
  1. Under Section 404.2.6 of ICC A117.1-2017, what is the maximum operational force allowed to retract the latch on accessible door hardware that operates by a rotational motion, such as a lever handle or thumb-turn?

    Answer: 28 inch-pounds

    Section 404.2.6 sets two limits for retracting latches or disengaging devices that hold a door closed: 15 pounds for hardware operated by a forward, pushing or pulling motion, and 28 inch-pounds for hardware operated by a rotational motion. The 2021 IBC (Section 1010.1.3) uses the same 15 pound and 28 inch-pound figures. The 5 pound figure belongs to door opening force (404.2.8) and general operable parts (309.4), not to latch retraction on door hardware.

    Reference: ICC A117.1-2017 (NJ Barrier Free Subcode), 404.2.6

  2. In a pin tumbler cylinder, the plug can rotate only when the pin stacks are lifted so that the break between the key pins and driver pins lines up with which feature?

    Answer: The shear line between the plug and the cylinder body

    The shear line is the point where the plug meets the cylinder shell. When the correct key lifts every pin stack so the key pin and driver pin meet exactly at that line, nothing crosses it and the plug turns. A wrong key leaves at least one pin straddling the line.

    Reference: General practice: pin tumbler and wafer tumbler cylinders, Pin tumbler operation: shear line

  3. To which listing standards must fire exit hardware installed under the 2021 IBC be listed?

    Answer: UL 10C and UL 305

    Section 1010.2.9.3 requires panic hardware to be listed to UL 305 and fire exit hardware to be listed to both UL 10C and UL 305. UL 294 is the listing for access control system units such as electric locking systems and delayed egress locks.

    Reference: 2021 International Building Code, 1010.2.9.3

  4. A house has a double-cylinder deadbolt on the front door, and the fire inspector raises a concern. What is the specific hazard?

    Answer: Occupants need the key to leave when the deadbolt is locked, which can trap them in a fire

    A double-cylinder deadbolt takes a key on both sides, so an occupant who cannot find the key cannot leave through the door. Single-cylinder deadbolts with an inside thumb-turn do not have that problem, which is why they are the usual choice on doors used for egress. Check the local code before installing double-cylinder locks on any egress door.

    Reference: General practice: lockset functions (ANSI/BHMA A156 function types), Single and double cylinder deadbolts: egress

  5. How is a bump key normally used on a pin tumbler lock?

    Answer: It is inserted one notch short of full depth, turned lightly and then struck so it moves inward

    A bump key has every cut at the lowest depth. It is pushed in until one notch from full insertion, light torque is applied, and the key is struck so it moves into place. Like Newton's cradle, the impact moves the driver pins and leaves the key pins in place, which briefly opens a gap at the shear line.

    Reference: General practice: non-destructive lock opening (picking, bumping, bypass), Lock bumping technique

  6. A locksmith tells an apprentice to read the bitting on a key blade. Which feature is the bitting?

    Answer: The pattern of cuts on the blade that lifts the pins

    The bitting is the series of cuts in the blade; each number in a bitting code is a cut at one position. The bow is the large flat end, the shoulder or stop positions the key in the plug, and the blade profile is what must match the keyway.

    Reference: General practice: keys, keying and master key systems, Key anatomy: bitting

  7. Using the convention for a Kwikset-style key where depth 1 is the shallowest cut and depth 7 the deepest, what does a five-cut key with the bitting code 77777 look like?

    Answer: Five deep cuts

    The bitting code gives one depth number per cut position. Under this convention 1 is the shallowest and 7 the deepest, so 11111 is five shallow cuts and 77777 is five deep cuts. The depth and spacing number for the key series is needed along with the bitting code to define the whole key geometry.

    Reference: General practice: key codes and key cutting equipment, Bitting code with depth and spacing number

  8. A three-wheel lock has a dial marked 0 to 99. Ignoring dialing tolerance and any rules about which numbers can be used, how many combinations are theoretically possible?

    Answer: 1,000,000

    Each of three wheels can open at any of 100 dial positions, so 100 x 100 x 100 = 100^3 = 1,000,000. 3 x 100 = 300 adds instead of multiplying, and 99^3 = 970,299 wrongly drops one number. Real locks allow a small tolerance either side of each number and bar some combinations, so the usable count is lower.

    Reference: General practice: mechanical and electronic combination locks, Single-dial combination locks: counting combinations

  9. A 26-bit Wiegand format has 1 parity bit, 8 bits of facility code, 16 bits of card number and 1 trailing parity bit. How many different card numbers can one facility code hold?

    Answer: 65,536

    The 16-bit card number field gives 2^16 = 65,536 values (0 to 65,535). The 8-bit facility code gives only 2^8 = 256 values (0 to 255). 16,777,216 is 2^24, which would apply only if the card field were 24 bits wide, and parity bits do not carry data.

    Reference: General practice: access control systems, credentials and readers, 26-bit Wiegand format

  10. An electric strike is described as fail-secure. What happens to the door when power to the strike is lost?

    Answer: The strike stays locked, and the mechanical lock can still be used for exit

    A fail-secure (fail-locked) strike unlocks when energized and stays locked when power is lost. The door can normally still be opened from the secure side by the mechanical lock. A fail-safe strike is the reverse: it is locked when energized and opens when power is lost.

    Reference: General practice: electrified locking hardware and low-voltage power, Electric strikes: fail-secure

Sources

Questions last verified November 16, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.