Requirements at a glance
| Agency | Minnesota Department of Labor and Industry (DLI); Plumbing Board sets the rules |
|---|---|
| Experience | 1 year as a licensed journeyworker plumber |
| Exam | 300 points, 5.5 hours, 70% to pass |
| Books allowed | None of your own: DLI supplies the 2020 Minnesota Plumbing Code (without tabs), the laws-and-rules booklet and a calculator |
| Fees | $50 per personal-license exam (Minn. Stat. 326B.092), plus application and license fees |
Journeyworker plumbers applying to DLI for a master plumber license after 1 year as a licensed journeyworker.
Official links
How to get licensed, step by step
Apply to DLI
Send DLI your master plumber application, proof of experience and the $50 exam fee. Licenses expire December 31 of odd years with 16 hours of continuing education (8 on code).
Minnesota Department of Labor and Industry (DLI) (opens in a new tab)DLI: plumbing license basics (opens in a new tab)
Schedule your exam
After DLI approves your application, you schedule the exam in DLI's iMS system. DLI gives exams at its St. Paul office (Tuesday to Thursday) and at outstate sites including Duluth, Mankato, Rochester and St. Cloud.
Take the exam
You have 5.5 hours and need 70%. The exam is open book with DLI-supplied references; no personal books, notes or electronic devices.
DLI: plumbing license basics (opens in a new tab)DLI Plumbing License Examination Guide (PDF) (opens in a new tab)
Results and retakes
DLI mails results in about 2 weeks. If you fail, wait 30 days after receiving results before reapplying.
How to prepare
- The exam uses the 2020 Minnesota Plumbing Code (Rules 4714): the 2018 UPC with Minnesota amendments. DLI scores the journeyworker exam out of 240 points and the master exam out of 300 points; each question is worth the same unless stated otherwise.
- DLI's guide lists knowledge areas by code chapter, including pipe sizing from the Chapter 6, 7, 9 and 11 tables with sample drawings. Learn fixture-unit values, trap and vent sizes and the Minnesota amendments.
- Every DLI exam is open book, but with DLI-supplied references only: a code book without tabs, the DLI laws-and-rules booklet and a desk calculator. You cannot bring your own books, so practice finding answers fast rather than relying on tabs.
- DLI publishes no topic weights, so our topic split is an estimate. Several versions of each exam are in use, and some questions ask for more than one answer or the choice that does not apply.
- The master exam is longer (300 points) and adds more law and licensing material from Rules 4716 and Statutes 326B. Practice full sizing workflows: fixture units, water pipe, drain and vent.
- Start with the free questions above to find your weak topics, then drill those first.
- Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
- Read every explanation, including for questions you got right, and look the section up in your own book.
Books for this exam
This is an open-book exam: you can bring the references below, and most questions come from the Minnesota Plumbing Code. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.
2020 Minnesota Plumbing Code (Minnesota Rules chapter 4714)Essential
DLI supplies the code book (without tabs) in the exam room. It is the 2018 Uniform Plumbing Code with Minnesota amendments.
DLI Plumbing License Examination Guide (April 2022)
DLI's own list of the code chapters and knowledge areas on each plumbing exam, with sample questions and formulas.
Official reference list (as published by the testing agency)
- 2020 Minnesota Plumbing Code, Minnesota Rules chapter 4714 (the 2018 Uniform Plumbing Code with Minnesota amendments). DLI provides the code book, without tabs.
- Minnesota Rules chapter 4716 (plumber licensing) and Minnesota Statutes 144, 325 and 326B (in the DLI laws-and-rules booklet)
What's on the exam
Estimated topic weighting. No official breakdown is published:
| Topic | Questions | |
|---|---|---|
| Chapter 2: Definitions | 4 | |
| Chapter 3: General Regulations | 8 | |
| Chapter 4: Plumbing Fixtures and Fixture Fittings | 7 | |
| Chapter 5: Water Heaters | 5 | |
| Chapter 6: Water Supply and Distribution | 10 | |
| Chapter 7: Sanitary Drainage | 13 | |
| Chapter 8: Indirect Wastes | 3 | |
| Chapter 9: Vents | 11 | |
| Chapter 10: Traps and Interceptors | 5 | |
| Chapter 11: Storm Drainage | 6 | |
| Pipe Sizing: Water, Drain, Waste and Vent | 13 | |
| Minnesota Plumber Licensing and Law (Rules 4716, Statutes 326B) | 10 |
Exam day details
- Administered by the Minnesota Department of Labor and Industry (DLI), which gives its own exams.
- Fee: $50 per personal-license exam (Minn. Stat. 326B.092). Application and license fees are separate.
- 5.5 hours, open book with DLI-supplied references; 70% to pass. DLI scores the exam out of 300 points; our practice exam uses 100 questions.
- Open book with DLI-supplied references: you get the code book (without tabs), the DLI laws-and-rules booklet and a desk calculator. You cannot bring your own books, notes or electronic devices.
- DLI gives the exam at its St. Paul office and outstate sites, scheduled after DLI approves your application. The time limit is 5.5 hours; the passing score is 70%.
- Results are mailed in about 2 weeks. If you fail, wait 30 days after receiving results before reapplying.
- Some questions ask you to pick more than one answer (the question says how many) or the one choice that does not apply. Several versions of each exam are in use.
- DLI scores the journeyworker exam out of 240 points and the master exam out of 300 points, each question worth the same unless stated otherwise. DLI does not publish a question count, so our practice length is an estimate.
- DLI's guide lists code chapters as knowledge areas (not every area appears on every exam) and gives no weights, so our topic split is an estimate. Some calculation questions have no multiple-choice answers on the real exam.
- The exam uses the 2020 Minnesota Plumbing Code. The 2018 UPC is its base, but where Minnesota Rules 4714 amend it, our questions use the Minnesota text. A review of the 2024 UPC was under way in late 2025; no adoption had been found, so the exam stays on the 2020 code.
Note: DLI scores the plumbing exams in points (240 journeyworker, 300 master) and publishes no question count or topic weights, so our practice length and topic split are estimates. Table values come from the 2018 UPC and Minnesota Rules 4714; confirm sizing tables in the code book DLI provides.
Frequently asked questions
How many points is the Minnesota master plumber exam?
300 points, each question worth the same unless stated otherwise. DLI does not publish a question count.
What is the passing score?
70%, the same as every DLI exam. Plumbing scores within 1 point of passing are rechecked.
Is the exam open book?
Yes, but only with the DLI-supplied code book (without tabs), laws-and-rules booklet and calculator.
Free questions with answers
Show all 10 free questions and answers
Under UPC 409.4 as amended by Minnesota, what is the maximum hot water temperature discharging from a bathtub filler?
Answer: 120 degrees F
Minn. R. 4714.0409, subp. 2 sets 120 degrees F (49 C) for bathtub and whirlpool bathtub fillers, controlled by a device conforming to ASSE 1070/ASME A112.1070/CSA B125.70 or CSA B125.3, or by a water heater conforming to ASSE 1084. Lavatories and bidets are limited to 110 degrees F.
Reference: Minnesota Plumbing Code (Minn. R. ch. 4714), Minn. R. 4714.0409, subp. 2 (UPC 409.4)
Under UPC 301.3 as amended by Minnesota, an alternate material or method approved by the Authority Having Jurisdiction is valid where?
Answer: Only for the purpose granted and only within that authority's jurisdictional boundaries
Minn. R. 4714.0301 amends 301.3: the discretionary approval has no effect beyond the jurisdictional boundaries of the authority that gave it, and an approved alternate is not considered code-compliant for any purpose other than the one granted. Technical documentation must be submitted before installation.
Reference: Minnesota Plumbing Code (Minn. R. ch. 4714), Minn. R. 4714.0301, subp. 2 (UPC 301.3)
UPC 504.6 (as amended in Minnesota) says what about shutoff valves on a water heater relief valve installation?
Answer: No shutoff valve between the relief valve and the heater, and none on the discharge piping to the atmosphere
Minn. R. 4714.0504 subp. 2 amends 504.6: relief devices are installed per their listings and the manufacturer; no shutoff valve is allowed between the relief valve and the heater or on discharge pipes; and the relief valve's Btu/hr discharge capacity must be not less than the heater's input rating. Discharge piping follows 608.5.
Reference: Minnesota Plumbing Code (Minn. R. ch. 4714), Minn. R. 4714.0504, subp. 2 (UPC 504.6)
An emergency floor drain (as Minnesota defines it) is listed in Table 702.1 as amended. What drainage fixture unit value is assigned to it?
Answer: 0 fixture units, in a 2-inch trap
Minn. R. 4714.0702 Table 702.1 lists Floor Drain, Emergency, 2-inch trap, 0.0 DFU for public and assembly use, while an ordinary floor drain is 2.0 DFU. Emergency floor drains are those that are not receptors, are in restrooms, under emergency eyewash/shower equipment, or in laundry rooms.
Reference: Minnesota Plumbing Code (Minn. R. ch. 4714), Minn. R. 4714.0702, Table 702.1
A booster pump (not a fire pump) is connected to a building supply. Which description of the UPC 609.8 protection is correct?
Answer: A low-pressure cutoff within 5 feet of the inlet, set at 10 psi or more, plus a gauge between the shutoff valve and pump
609.8: where a booster pump (excluding a fire pump) is connected to a building supply or underground water pipe, a low-pressure cutoff switch must be installed on the inlet side within 5 feet of the inlet and set for not less than 10 psi. A pressure gauge is installed between the shutoff valve and the pump.
Reference: 2018 Uniform Plumbing Code, Section 609.8
A vent pipe terminates near an openable window. Which statement matches UPC 906.2 (not amended by Minnesota)?
Answer: It must be at least 10 feet from the window, or at least 3 feet above the top of it
906.2: each vent terminates not less than 10 feet from, or not less than 3 feet above, an openable window, door, opening, air intake or vent shaft, and not less than 3 feet in every direction from a lot line (alley and street excepted). The numbers 10 and 3 are not interchangeable.
Reference: 2018 Uniform Plumbing Code, Section 906.2
What is the maximum developed length of a 1-1/2-inch trap arm from the trap weir to the vent under UPC Table 1002.2?
Answer: 42 inches
Table 1002.2 gives maximum horizontal trap arm lengths of 30 inches for 1-1/4 inch, 42 inches for 1-1/2 inch, 60 inches for 2 inch, 72 inches for 3 inch, and 120 inches for 4 inch and larger, at 1/4 inch per foot slope. Minn. R. 4714.1002 amends 1002.2 but keeps the table.
Reference: Minnesota Plumbing Code (Minn. R. ch. 4714), Minn. R. 4714.1002 (UPC 1002.2, Table 1002.2)
A building roof drain system is being sized in Minnesota. What minimum rainfall rate applies under UPC 1101.12.1 as amended?
Answer: 4 inches per hour
Minn. R. 4714.1101, subp. 4 amends 1101.12: the roof drainage system is sized on a rainfall rate of at least 4 inches per hour. Sections 1103.1 and 1103.2 also say that for sizes not listed in Tables 1103.1 and 1103.2, a rate of at least 4 inches per hour must be used.
Reference: Minnesota Plumbing Code (Minn. R. ch. 4714), Minn. R. 4714.1101, subp. 4 (UPC 1101.12.1)
A sump pump discharging 18 gpm will connect to the building drainage system. Under UPC 702.3, how many drainage fixture units does it add?
Answer: 36 DFU
UPC 702.3: for a continuous flow into a drainage system, such as from a pump, sump ejector or air conditioning equipment, 2 fixture units equal each gallon per minute of flow. 18 gpm x 2 = 36 DFU. Counting 1 DFU per gpm gives 18; the other values are 1/2 and 4 times.
Reference: 2018 Uniform Plumbing Code, Section 702.3
Under Rules 4716, how many hours make up one year of practical plumbing experience?
Answer: 1,750 hours
Minn. R. 4716.0020, subp. 2.A: one year of practical plumbing experience consists of at least 1,750 hours, and not more than 1,750 hours are credited for one calendar year (item B). 2,000 and 2,080 are common full-time year counts but not the rule.
Reference: Minnesota Rules, chapter 4716, Minn. R. 4716.0020, subp. 2, items A and B
Sources
- DLI Plumbing License Examination Guide (April 2022) (opens in a new tab)
- Minnesota DLI: plumbing license basics (opens in a new tab)
- Minnesota DLI: license exam schedule (opens in a new tab)
Questions last verified November 9, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.