Requirements at a glance
| Agency | Arkansas HVACR Licensing Board (Department of Labor and Licensing); exams by Prov |
|---|---|
| Experience | Applicants with no license history need 2 years of experience as an HVACR contractor or employee of one, or Board-approved training (17 CAR 261; our copy is an August 2025 draft) |
| Exam | Class A HVACR (100 questions, 4 hours, 70% to pass, open book; unlimited capacity) |
| Books allowed | The Arkansas HVAC/R Law and Rules, the 2018 or 2021 IMC and IFGC (or Arkansas Fuel Gas Code), ACCA Manual J (8th Edition), Modern Refrigeration and Air Conditioning (21st Edition), the 2020 NEC and Refrigeration and Air Conditioning Technology (8th Edition) |
| Fees | $100 per computer-based exam ($55 paper/pencil), plus Board application and license fees |
HVACR contractors and their designated license holders applying to the Arkansas HVACR Licensing Board for a Class A license, which allows HVACR work without limit on capacity. Applicants with no license history need 2 years of experience as an HVACR contractor or employee, or Board-approved training.
Official links
How to get licensed, step by step
Apply to the Board
Send the HVACR Licensing Board your Class A application. The Board must pre-approve you before you schedule. Questions: adll.hvac@arkansas.gov or 501-682-9201.
Arkansas Department of Labor and Licensing: HVACR licensing (opens in a new tab)
Schedule with Prov
After approval, schedule the computer-based exam with Prov and pay the $100 exam fee. Approval lasts one year.
Prov (schedule your exam) (opens in a new tab)Prov: Arkansas HVACR candidate bulletin (2025.07.03, archived copy) (opens in a new tab)
Pass the exam
The exam is open book and timed, with a 70% cut score. Permanent tabs are fine; photocopied books, sticky notes and test-prep guides are not allowed.
Prov: Arkansas HVACR candidate bulletin (2025.07.03, archived copy) (opens in a new tab)
Get licensed
Pay the license fee. A Class A, B, D or E licensee is the designated license holder for the company.
Arkansas Department of Labor and Licensing: HVACR licensing (opens in a new tab)
How to prepare
- Download the Arkansas HVAC/R Law and Rules (free PDFs from the Department of Labor and Licensing); every HVACR exam has a law and administration section and you may bring printed copies.
- The 2018 or 2021 IMC and IFGC (or the Arkansas Fuel Gas Code) are allowed. The Board adopted the 2021 International Mechanical Code effective July 1, 2022.
- Systems and sizing is the biggest area (19 of 100): practice ACCA Manual J (8th Edition) load calculations, which Prov lists as a reference.
- Class A has no size limit; know the Class B limits so you can tell which jobs need which license.
- Start with the free questions above to find your weak topics, then drill those first.
- Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
- Read every explanation, including for questions you got right, and look the section up in your own book.
Books for this exam
This is an open-book exam: you can bring the references below, and most questions come from the 2021 IMC and the 2018 Arkansas Fuel Gas Code. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.
2021 International Mechanical Code (IMC)Essential
Adopted for HVACR in 17 CAR 261-121, effective July 1, 2022. Prov allows the 2018 or 2021 edition.
2018 Arkansas Fuel Gas Code (2018 IFGC with Arkansas amendments)Essential
Gas piping, venting and combustion air: Chapter 5 and Chapter 3, and the Appendix A sizing tables.
Official reference list (as published by the testing agency)
- Arkansas HVAC/R Law (free PDF from the Department of Labor and Licensing; candidate-printed copies allowed)
- Arkansas HVAC/R Rules and Regulations (free PDF from the Department; candidate-printed copies allowed)
- International Mechanical Code (IMC), 2018 or 2021 edition
- International Fuel Gas Code (IFGC), 2018 or 2021 edition, or the Arkansas Fuel Gas Code 2018 or 2021 edition as a substitute
- Residential Load Calculation: Manual J, 8th Edition (ACCA, ISBN 9781892765253)
- Modern Refrigeration and Air Conditioning, 21st Edition (ISBN 978-1-63563-877-6)
- NFPA 70: National Electrical Code, 2020 (ISBN 9781455922970)
- Refrigeration and Air Conditioning Technology, 8th Edition (Cengage, ISBN 1305578295)
What's on the exam
Official content outline from Prov (number of questions per topic):
| Topic | Questions | |
|---|---|---|
| General Knowledge | 12 | |
| Systems & Sizing | 19 | |
| Equipment | 12 | |
| Piping | 10 | |
| Refrigeration Systems | 6 | |
| Law and Administration | 4 | |
| Electrical | 5 | |
| Maintenance | 12 | |
| Plan Reading, Estimating & Math | 8 | |
| Fuel Gas Systems | 12 |
Exam day details
- Administered by Prov for the Arkansas HVACR Licensing Board (Department of Labor and Licensing).
- Fee: $100 for the computer-based exam ($55 paper/pencil) per Prov's bulletin; 17 CAR 261-106(g) also sets $100. Board application and license fees are separate.
- Prov's bulletin: 100 questions in 4 hours, open book, 70% cut score. Our practice exam uses the same counts and the same ten subject areas.
- Computer-based exam from Prov (paper/pencil is cheaper). The HVACR Licensing Board must pre-approve you before you schedule; approval lasts one year.
- All Prov HVACR exams are open book and timed, with a 70% cut score. Books may carry permanent tabs; photocopied books, sticky notes and test-prep study guides are not allowed. The Arkansas HVAC/R Law and Rules may be printed.
- 17 CAR Part 261 was rewritten after Act 746 of 2025. The copy we studied is an August 2025 draft, so check the final rule.
Note: Format, subject areas and references come from Prov's HVACR bulletin dated July 3, 2025. 17 CAR Part 261 was rewritten after Act 746 of 2025 and our copy is an August 2025 draft, so confirm license limits and any exam changes with the Board and Prov.
Frequently asked questions
What's on the Arkansas HVACR Class A exam?
Ten subject areas: systems and sizing (19 questions), general knowledge (12), equipment (12), maintenance (12), fuel gas systems (12), piping (10), plan reading, estimating and math (8), refrigeration systems (6), electrical (5) and law and administration (4).
What is the difference between Class A and Class B?
Class A has no limit on capacity. Class B is limited to 25 tons of cooling under Act 746 of 2025 and the August 2025 draft rule (Prov's bulletin still says 15 tons per unit), 1,000,000 BTUH of heating and 15 horsepower of refrigeration per unit.
How much does the exam cost?
$100 for the computer-based exam ($55 paper/pencil), plus Board application and license fees.
Free questions with answers
Show all 10 free questions and answers
Under the Arkansas HVACR Licensing Board's license classifications, which statement describes a Class A license?
Answer: It allows HVACR work without any limit on BTUH or horsepower capacity per unit
17 CAR 261-103(a) says a Class A license covers HVACR work without limitation to BTUH or horsepower capacities. The 25 ton and 1,000,000 BTUH limits describe Class B, the refrigeration-only scope describes Class E, and the sheet metal scope describes Class D.
Reference: Arkansas HVACR Licensing Rules (17 CAR 261), 17 CAR 261-103(a)
An air handler is in an attic. Under IMC Section 306.3, what is the maximum length of the passageway measured along its centerline from the opening to the appliance, when the passageway is only the standard minimum 30 inches high?
Answer: 20 feet
IMC 306.3 limits the passageway to 20 feet along the centerline. The exception allows up to 50 feet only when the passageway is unobstructed and at least 6 feet high and 22 inches wide for its whole length. A 30 inch high passageway does not qualify for the exception.
Reference: 2021 International Mechanical Code, Section 306.3
A 2,000-square-foot open office is served by a cooling-only ceiling supply and designed at the default occupant density in IMC Table 403.3.1.1 (5 people per 1,000 square feet; 5 cfm per person; 0.06 cfm per square foot). What is the zone outdoor airflow, using Equations 4-1 and 4-2?
Answer: 170 cfm
Pz = 5 x 2 = 10 people. Vbz = Rp x Pz + Ra x Az = 5 x 10 + 0.06 x 2,000 = 50 + 120 = 170 cfm. Ceiling supply of cool air has Ez = 1.0 (Table 403.3.1.1.1.2), so Voz = 170 / 1.0 = 170 cfm. The 120 and 50 figures use only one of the two terms.
Reference: 2021 International Mechanical Code, Sections 403.3.1.1.1.1 and 403.3.1.1.1.3, Table 403.3.1.1
Under IMC Section 603.6.2.1, flexible air connectors are limited to what maximum length?
Answer: 14 feet
Section 603.6.2.1 limits flexible air connectors to 14 feet, and 603.6.2.2 bars them from passing through any wall, floor or ceiling. Flexible air ducts, by contrast, are not limited in length under the 2021 edition (Section 603.6.1.1), so the 14 foot figure is easy to misapply.
Reference: 2021 International Mechanical Code, Sections 603.6.2.1 and 603.6.1.1
A closet holds a 100,000 Btu/h fan-assisted furnace and a 40,000 Btu/h atmospheric water heater. Under AFGC Section 304.5.1, what indoor air volume is required to use the standard method for combustion air?
Answer: 7,000 cubic feet
The standard method needs 50 cubic feet per 1,000 Btu/h of the total input of all appliances in the space (Section 304.5). Total input is 100,000 + 40,000 = 140,000 Btu/h, so 140 x 50 = 7,000 cubic feet. Counting only one appliance or doubling the 50 cubic foot factor gives the other figures.
Reference: 2018 Arkansas Fuel Gas Code, Sections 304.5 and 304.5.1
Under IMC Section 1110.3, which test medium is acceptable for pressure testing a refrigerant piping system for a typical halocarbon refrigerant?
Answer: Oxygen-free nitrogen, helium or argon
Section 1110.3 allows oxygen-free nitrogen, helium or argon as the test gas (plus carbon dioxide for R-744 and water for R-718 systems). Oxygen, air, combustible gases and mixtures containing them must not be used, because of fire and explosion hazards with oil in the system.
Reference: 2021 International Mechanical Code, Section 1110.3
Under IMC Section 1110.5, what must a refrigerant piping system achieve in its vacuum (evacuation) test?
Answer: A vacuum of 500 microns, then isolated, with no rise above 1,500 microns for at least 10 minutes
Section 1110.5 requires a vacuum of 500 microns; after isolating the system from the pump the pressure must not rise above 1,500 microns for at least 10 minutes. The separate pressure test requires at least 60 minutes at the specified pressure, so the two time periods should not be confused.
Reference: 2021 International Mechanical Code, Section 1110.5
A machinery room has 800 square feet of floor area and is normally occupied by 4 people. Using the normal ventilation rate in IMC Section 1105.6.3.1, and ignoring the temperature-rise requirement, what minimum exhaust rate is required?
Answer: 400 cfm
The system exhausts the larger of 0.5 cfm per square foot or 20 cfm per person (and the volume needed to hold temperature rise to 18 degrees F). Area basis: 0.5 x 800 = 400 cfm. People basis: 20 x 4 = 80 cfm. The larger value is 400 cfm. Adding them gives 480, which is not what the section requires.
Reference: 2021 International Mechanical Code, Section 1105.6.3.1
Air moves at 1,200 cfm through a rectangular duct 12 inches by 16 inches. What is the air velocity in feet per minute?
Answer: 900 fpm
Area = 12 x 16 = 192 square inches / 144 = 1.333 square feet. Velocity = cfm / area = 1,200 / 1.333 = 900 fpm. Multiplying instead of dividing gives 1,600, and using square inches as square feet gives a few fpm.
Reference: Standard HVAC formula (not a code section), Continuity: cfm = area (sq ft) x velocity (fpm)
A 10 kW single-phase electric heat strip is connected to a 240 volt supply. What is its approximate full-load current?
Answer: 41.7 amps
For a resistive single-phase load, amps = watts / volts = 10,000 / 240 = 41.7 amps. Dividing by 240 x 1.732 = 24.1 amps would apply to a three-phase load, and using 120 volts would give 83.3 amps.
Reference: Standard electrical fundamentals (not a code section), Power of a resistive single-phase load, P = V x I
Sources
- Arkansas Department of Labor and Licensing: HVACR licensing (opens in a new tab)
- Prov: Arkansas HVACR candidate information bulletin (2025.07.03, archived copy) (opens in a new tab)
Questions last verified November 13, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.