Illinois licensing exam

Illinois Unlimited Roofing Contractor Exam: Practice Test & Licensing Guide

The CTS exam for Illinois's unlimited roofing contractor license (residential, commercial and industrial): 130 questions over 2.5 hours, including non-residential roofing systems. 70 to pass.

Questions
130
Time limit
2.5 hours
Passing score
70%
Books
Not published by Illinois
What to study ↓

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10Safety & Employee Protection

At what height above a lower level must a construction employer protect workers from falling at unprotected roof edges, under the OSHA construction fall protection standard?

Requirements at a glance

AgencyIllinois Department of Financial and Professional Regulation (IDFPR); exams by Continental Testing Services (CTS)
Exam130 questions, 2.5 hours, 70 to pass
ScopeUnlimited license: residential, commercial and industrial
Book allowedNot stated in CTS's guide; assume none
Fee$248 (CTS); not refundable

The qualifying party for an Illinois unlimited roofing contractor license covering residential, commercial and industrial work.

How to get licensed, step by step

  1. Check eligibility with IDFPR

    The Roofing Industry Licensing Act sets who can qualify. Read the IDFPR roofing page and the qualifying party rules before you apply.

    IDFPR: Roofing Contractor licensing (opens in a new tab)

  2. Apply and register with CTS

    Use the IDFPR application deadline and CTS exam schedule. There are no make-up exams and no refunds; a missed exam is re-registered for the next date.

    IDFPR: Roofing Contractor licensing (opens in a new tab)Continental Testing Services: Illinois exams (opens in a new tab)

  3. Pass with 70

    All CTS roofing exams are multiple choice with 70 to pass. Failed candidates may re-register for the next date.

    Continental Testing Services: Illinois exams (opens in a new tab)

  4. License

    After you pass, complete the IDFPR licensure steps for the roofing contractor license and qualifying party designation.

    IDFPR: Roofing Contractor licensing (opens in a new tab)

How to prepare

  • CTS's guide lists NRCA manuals but does not say whether the exam is open book, so plan on closed book and learn the material.
  • Safety and employee protection is the biggest section on every roofing exam (25 of 80 residential, 25 of 130 unlimited): fall protection, ladders, hot-work and asbestos basics.
  • Learn the Roofing Industry Licensing Act (225 ILCS 335): qualifying party, limited versus unlimited license scope, contracts and insurance.
  • Steep-slope roofing systems (35) is the largest topic, followed by safety (25). Non-residential systems add 15 questions on membranes, insulation and drainage.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

What to study

This is a closed-book exam, so nothing comes into the exam room. Study from these:

Official reference list (as published by the testing agency)
  • Illinois Roofing Industry Licensing Act (225 ILCS 335) and Rules
  • NRCA Roofing Manual (4 volumes, 2018 to 2021 editions)
  • NRCA Safety Manual, 3rd Edition (2012), and NRCA Pocket Guide to Safety (2015)
  • NRCA Waterproofing Manual (2005) and Repair Manual for Low-Slope Membrane Roof Systems, 2nd Edition (2018)
  • A Practical Guide to Handling Asbestos-Containing Materials (NRCA)
  • NASCLA Contractors Guide to Business, Law and Project Management, 12th Edition (2017)
  • Roofing Construction and Estimating (Atcheson, 1995)

What's on the exam

Official content outline from Continental Testing Services (CTS) (number of questions per topic):

TopicQuestions
Safety & Employee Protection25
Roofing Preparation & Materials20
Steep-Slope Roofing Systems35
Low-Slope Roofing Systems15
Rules, Regulations & Business Practices20
Non-Residential Roofing Systems15

Exam day details

  • Administered by Continental Testing Services (CTS) for the Illinois Department of Financial and Professional Regulation (IDFPR).
  • Fee: $248
  • 130 questions in 2.5 hours; 70 to pass.
  • Multiple choice, four answers per question; 70 to pass. Our topic counts come from CTS's May 2021 study guide.
  • The Roofing Industry Licensing Act (225 ILCS 335) requires a qualifying party; limited (residential only) and unlimited (residential, commercial and industrial) licenses differ in scope.
  • CTS gives roofing exams on scheduled dates for IDFPR applicants. Fees are not refundable and a missed exam is re-registered for the next date.
  • Eligibility is set by the Act and IDFPR; check the IDFPR roofing page and apply there first.

Note: CTS's May 2021 study guide gives the topic counts but does not say whether the exam is open or closed book; we assume closed. The NRCA manuals are not freely readable, so our questions rest on the Roofing Industry Licensing Act and general roofing practice.

Frequently asked questions

What's on the Illinois unlimited roofing exam?

130 questions: steep-slope roofing systems 35, safety and employee protection 25, roofing preparation and materials 20, rules, regulations and business practices 20, low-slope roofing systems 15 and non-residential roofing systems 15.

How long is the exam?

2.5 hours for 130 multiple-choice questions, with 70 to pass.

How is it different from the residential exam?

It is longer and adds a 15-question non-residential roofing systems section, with more questions in every other topic except safety.

Free questions with answers

Show all 10 free questions and answers
  1. At what height above a lower level must a construction employer protect workers from falling at unprotected roof edges, under the OSHA construction fall protection standard?

    Answer: 6 feet or more

    29 CFR 1926.501(b)(1) requires fall protection for employees on walking/working surfaces with an unprotected side or edge 6 feet or more above a lower level. The 10-foot figure is the scaffold threshold, not the general roof-edge rule.

    Reference: OSHA 29 CFR 1926, 1926.501(b)(1)

  2. Under OSHA's definitions, a roof is considered "low-slope" for fall protection purposes when its pitch is at most

    Answer: 4 in 12

    29 CFR 1926.500(b) defines a low-slope roof as having a slope of 4 in 12 or less and a steep roof as greater than 4 in 12. Note that roofing-industry texts often use 3:12 for roofing-system classification, but OSHA's fall protection rules use 4:12.

    Reference: OSHA 29 CFR 1926, 1926.500(b) definitions

  3. A gable roof has two equal planes. The building is 50 ft long, each plane has a 15 ft horizontal run, and the slope is 6:12 (slope factor 1.118). Shingles come 3 bundles per square and the crew adds 10 percent waste. About how many bundles are needed?

    Answer: 56 bundles

    Flat area = 2 x 50 x 15 = 1,500 sq ft. Sloped area = 1,500 x 1.118 = 1,677 sq ft = 16.77 squares. With 10 percent waste = 18.45 squares x 3 = 55.3, rounded up to 56 bundles. 51 omits waste; 50 omits the slope factor; 28 counts only one plane.

    Reference: NRCA Roofing Manual (2018-2021), Estimating roof area and material quantities (concept)

  4. Why should copper flashing not be used in direct contact with galvanized steel or aluminum in a wet environment?

    Answer: Galvanic corrosion of the more active metal

    When dissimilar metals are in contact in the presence of moisture, the more active metal corrodes. Roofers avoid it by using compatible metals or by separating them. Also, runoff from copper can stain and attack aluminum or galvanized finishes.

    Reference: NRCA Roofing Manual (2018-2021), Sheet metal and flashing materials (concept)

  5. Where should fasteners be placed on a standard three-tab asphalt shingle?

    Answer: In the manufacturer's nail line, just below the sealant strip

    Nails go in the area marked by the manufacturer, normally just below the adhesive strip and above the cutouts, so they are covered by the next course and hold the shingle in the strongest part of the mat. High nailing weakens wind resistance; low nailing leaves nails exposed.

    Reference: NRCA Roofing Manual: Steep-Slope Roof Systems (2018-2021), Asphalt shingle application: fastening (concept)

  6. A nail that is overdriven through the surface of an asphalt shingle is a problem because it

    Answer: Cuts the mat and cannot hold the shingle against wind uplift

    Nail heads must be driven flush with the surface. An overdriven nail cuts through the mat, so the shingle can tear off the nail. A raised nail may also telegraph or puncture the course above it.

    Reference: NRCA Roofing Manual: Steep-Slope Roof Systems (2018-2021), Asphalt shingle application: fastening (concept)

  7. In built-up roofing, bitumen should be applied so that

    Answer: Felt plies never touch each other, with bitumen fully between them

    Each ply is set into a full mopping of bitumen so that felt does not touch felt; felt-to-felt contact creates a path for water and a weak bond. Roofers often check the mopping by noting a bitumen bead at the edges of each ply.

    Reference: NRCA Roofing Manual: Membrane Roof Systems (2018-2021), Built-up roofing application (concept)

  8. An applicant for an Illinois roofing license must file a continuous surety bond. What amount does the Act set for an unlimited license?

    Answer: $25,000

    225 ILCS 335/3(2)(d) sets the continuous bond at $10,000 for a limited license and $25,000 for an unlimited license. $10,000 is the limited-license amount.

    Reference: Illinois Roofing Industry Licensing Act (225 ILCS 335), 225 ILCS 335/3(2)(d)

  9. Before a municipality that requires a building permit issues one for roofing work, what proof must it obtain?

    Answer: Proof of current State roofing licensure

    225 ILCS 335/5(a-3) bars a municipality or county from issuing a building permit to a roofing contractor without sufficient proof of current licensure. Unlimited licensees may be issued permits for residential, commercial and industrial projects.

    Reference: Illinois Roofing Industry Licensing Act (225 ILCS 335), 225 ILCS 335/5(a-3); 11(7)

  10. Which of these is a common roof deck type in commercial and industrial buildings?

    Answer: Steel deck

    Commercial and industrial roofs are commonly built on corrugated steel deck, structural concrete, wood plank or panel decks, precast concrete, and gypsum or lightweight insulating concrete. Steel deck is the most widespread on low-slope commercial buildings.

    Reference: NRCA Roofing Manual: Membrane Roof Systems and Metal Panel Systems (2018-2021), Roof decks for commercial and industrial buildings (concept)

Sources

Questions last verified November 13, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.