Illinois licensing exam

Illinois Commercial and Industrial Roofing Contractor Exam: Practice Test & Licensing Guide

The CTS exam that adds commercial and industrial work to an Illinois residential roofing license: 80 questions on safety, materials, steep- and low-slope and non-residential roofing systems. 70 to pass.

Questions
80
Time limit
Not published by Illinois
Passing score
70%
Books
Not published by Illinois
What to study ↓

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10Safety & Employee Protection

A crew is installing a membrane on a low-slope roof that is 40 feet wide and has no parapet. Which fall protection arrangement does OSHA allow for this narrow roof when the crew is doing roofing work?

Requirements at a glance

AgencyIllinois Department of Financial and Professional Regulation (IDFPR); exams by Continental Testing Services (CTS)
Exam80 questions, 70 to pass; you must pass the residential exam first
ScopeAdds commercial and industrial roofing to a residential license
Book allowedNot stated in CTS's guide; assume none
Fee$248 (CTS); not refundable

Roofing contractors who already passed the residential exam and want commercial and industrial authority. CTS requires the residential exam first.

How to get licensed, step by step

  1. Check eligibility with IDFPR

    The Roofing Industry Licensing Act sets who can qualify. Read the IDFPR roofing page and the qualifying party rules before you apply.

    IDFPR: Roofing Contractor licensing (opens in a new tab)

  2. Apply and register with CTS

    Use the IDFPR application deadline and CTS exam schedule. There are no make-up exams and no refunds; a missed exam is re-registered for the next date.

    IDFPR: Roofing Contractor licensing (opens in a new tab)Continental Testing Services: Illinois exams (opens in a new tab)

  3. Pass with 70

    All CTS roofing exams are multiple choice with 70 to pass. Failed candidates may re-register for the next date.

    Continental Testing Services: Illinois exams (opens in a new tab)

  4. License

    After you pass, complete the IDFPR licensure steps for the roofing contractor license and qualifying party designation.

    IDFPR: Roofing Contractor licensing (opens in a new tab)

How to prepare

  • CTS's guide lists NRCA manuals but does not say whether the exam is open book, so plan on closed book and learn the material.
  • Safety and employee protection is the biggest section on every roofing exam (25 of 80 residential, 25 of 130 unlimited): fall protection, ladders, hot-work and asbestos basics.
  • Learn the Roofing Industry Licensing Act (225 ILCS 335): qualifying party, limited versus unlimited license scope, contracts and insurance.
  • Equal weight (15 each) on safety, steep-slope, rules and business practices, and non-residential systems. Low-slope and materials are 10 each.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

What to study

This is a closed-book exam, so nothing comes into the exam room. Study from these:

Official reference list (as published by the testing agency)
  • Illinois Roofing Industry Licensing Act (225 ILCS 335) and Rules
  • NRCA Roofing Manual (4 volumes, 2018 to 2021 editions)
  • NRCA Safety Manual, 3rd Edition (2012), and NRCA Pocket Guide to Safety (2015)
  • NRCA Waterproofing Manual (2005) and Repair Manual for Low-Slope Membrane Roof Systems, 2nd Edition (2018)
  • A Practical Guide to Handling Asbestos-Containing Materials (NRCA)
  • NASCLA Contractors Guide to Business, Law and Project Management, 12th Edition (2017)
  • Roofing Construction and Estimating (Atcheson, 1995)

What's on the exam

Official content outline from Continental Testing Services (CTS) (number of questions per topic):

TopicQuestions
Safety & Employee Protection15
Roofing Preparation & Materials10
Steep-Slope Roofing Systems15
Low-Slope Roofing Systems10
Rules, Regulations & Business Practices15
Non-Residential Roofing Systems15

Exam day details

  • Administered by Continental Testing Services (CTS) for the Illinois Department of Financial and Professional Regulation (IDFPR).
  • Fee: $248
  • 80 questions; 70 to pass. Time is not stated in the guide; we use 90 minutes like the residential exam.
  • Multiple choice, four answers per question; 70 to pass. Our topic counts come from CTS's May 2021 study guide.
  • The Roofing Industry Licensing Act (225 ILCS 335) requires a qualifying party; limited (residential only) and unlimited (residential, commercial and industrial) licenses differ in scope.
  • CTS gives roofing exams on scheduled dates for IDFPR applicants. Fees are not refundable and a missed exam is re-registered for the next date.
  • Eligibility is set by the Act and IDFPR; check the IDFPR roofing page and apply there first.

Note: CTS's May 2021 study guide gives the topic counts but does not say whether the exam is open or closed book; we assume closed. The NRCA manuals are not freely readable, so our questions rest on the Roofing Industry Licensing Act and general roofing practice.

Frequently asked questions

What's on the Illinois commercial and industrial roofing exam?

80 questions: safety and employee protection 15, steep-slope roofing 15, rules, regulations and business practices 15, non-residential roofing systems 15, roofing preparation and materials 10 and low-slope roofing systems 10.

Do I have to pass the residential exam first?

Yes. CTS states you must pass the residential exam before you can take the commercial and industrial exam.

Should I take this or the unlimited exam?

The unlimited exam covers residential, commercial and industrial in one 130-question sitting. This exam is for people who already hold the residential result.

Free questions with answers

Show all 10 free questions and answers
  1. A crew is installing a membrane on a low-slope roof that is 40 feet wide and has no parapet. Which fall protection arrangement does OSHA allow for this narrow roof when the crew is doing roofing work?

    Answer: A safety monitoring system used alone, without a warning line system

    Under 1926.501(b)(10), roofing work on low-slope roofs 50 feet or less in width may use a safety monitoring system alone. Wider roofs need a warning line combined with guardrails, nets, personal fall arrest or a monitor. A warning line by itself is never enough, and verbal warnings are not an allowed system.

    Reference: 29 CFR 1926 (OSHA Construction Standards), 1926.501(b)(10)

  2. A personal fall arrest system must be rigged so that a worker cannot free fall more than what distance?

    Answer: 6 feet

    1926.502(d)(16) limits free fall to 6 feet and requires the system to bring the worker to a stop with a maximum deceleration distance of 3.5 feet. Rigging with the anchorage at or above the harness D-ring keeps free fall short.

    Reference: 29 CFR 1926 (OSHA Construction Standards), 1926.502(d)(16)

  3. What amount of continuous surety bond must an applicant file for an unlimited roofing license under the Act?

    Answer: $25,000

    Section 3(2)(d) requires a continuous bond of $10,000 for a limited license and $25,000 for an unlimited license. The $10,000 figure belongs to the limited license, which is the usual trap for a candidate for the broader license.

    Reference: Illinois Roofing Industry Licensing Act (225 ILCS 335), Section 3(2)(d)

  4. The Department serves a citation on a licensee for a minor violation. What happens if the licensee does not dispute it within 30 days after service?

    Answer: It becomes a final order and constitutes discipline

    Section 11.10(a) says the citation must state that the person may request a hearing instead of accepting it; if the matter is not disputed within 30 days after service, it becomes a final order and constitutes discipline. Citations are for violations without a substantial threat to the public.

    Reference: Illinois Roofing Industry Licensing Act (225 ILCS 335), Section 11.10(a)

  5. In the OSHA construction standards, a roof is classed as low-slope when its slope is no steeper than what?

    Answer: 4 in 12

    29 CFR 1926.500(b) defines a low-slope roof as one with a slope less than or equal to 4 in 12. NRCA's roofing manuals use a lower 3 in 12 break between low and steep slope for roof systems, so read which definition a question is using; for fall protection the OSHA number applies.

    Reference: 29 CFR 1926 (OSHA Construction Standards), 1926.500(b)

  6. Wet insulation is found during a pre-job inspection of a roof to be replaced. What is the proper action before the new membrane goes on?

    Answer: Remove the wet insulation and replace it with dry material

    Wet insulation loses R-value, can damage the new membrane, and can create blisters or deck corrosion. It should be removed and replaced with dry insulation. Sealing moisture in or trying to vent it under the membrane leaves the problem in the new roof.

    Reference: NRCA Roofing Manual: Membrane Roof Systems (2018-2021 volumes), Substrate preparation and tear-off (concept)

  7. A roof is described as having a 6:12 slope. What does that mean?

    Answer: It rises 6 inches for every 12 inches of horizontal run

    Slope is stated as rise in inches over 12 inches of horizontal run, so 6:12 rises 6 inches for each 12 inches. The reverse, 12 rise over 6 run, would be a much steeper roof of 24:12.

    Reference: NRCA Roofing Manual: Steep-Slope Roofing (2018-2021 volumes), Roof slope terminology (concept)

  8. A gable roof has a 40 foot by 30 foot building footprint with no overhangs and a 6:12 slope. The slope factor for 6:12 is 1.118. About how many squares of roofing cover the roof surface?

    Answer: 13.4 squares

    Footprint = 40 x 30 = 1,200 sq ft. Surface area = 1,200 x 1.118 = 1,341.6 sq ft, or 13.4 squares at 100 sq ft each. 12.0 squares ignores the slope, 14.4 uses a factor of 1.2, and 26.8 doubles the area as if two planes were counted twice.

    Reference: Roofing Construction and Estimating (Atcheson, 1995), Estimating steep-slope roof area (concept)

  9. A flat commercial roof is surrounded by parapets on all four sides. Why does model building code require a secondary (overflow) drainage system?

    Answer: So that water cannot build up to a dangerous depth if the primary drains clog

    Where parapets or other edge construction could trap water, the code requires overflow drains or scuppers that work if the primary drains are blocked, to limit ponding depth and structural load. Secondary drainage supplements, not replaces, the primary system, and it does not remove the need for slope.

    Reference: NRCA Roofing Manual: Membrane Roof Systems (2018-2021 volumes), Roof drainage and secondary drainage (concept)

  10. A roof assembly carries a Factory Mutual (FM) Global Class 1-90 rating. What does the 90 mean?

    Answer: It resists an uplift pressure of 90 pounds per square foot in testing

    FM Approvals wind uplift ratings such as 1-60, 1-90 and 1-120 indicate the assembly passed the test at that uplift pressure in pounds per square foot, and 1-90 is not a wind speed. Ratings relate to the whole assembly, including the deck, insulation attachment and membrane.

    Reference: NRCA Roofing Manual: Membrane Roof Systems (2018-2021 volumes), Wind uplift resistance of roof assemblies (concept)

Sources

Questions last verified November 13, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.