Requirements at a glance
| Agency | Illinois Department of Financial and Professional Regulation (IDFPR); exams by Continental Testing Services (CTS) |
|---|---|
| Exam | 80 questions, 90 minutes, 70 to pass |
| Scope | Limited license: residential roofing only |
| Book allowed | Not stated in CTS's guide; assume none |
| Fee | $248 (CTS); not refundable |
The qualifying party for an Illinois residential (limited) roofing contractor license. Passing it is also the first step toward the commercial and industrial exam.
Official links
How to get licensed, step by step
Check eligibility with IDFPR
The Roofing Industry Licensing Act sets who can qualify. Read the IDFPR roofing page and the qualifying party rules before you apply.
Apply and register with CTS
Use the IDFPR application deadline and CTS exam schedule. There are no make-up exams and no refunds; a missed exam is re-registered for the next date.
IDFPR: Roofing Contractor licensing (opens in a new tab)Continental Testing Services: Illinois exams (opens in a new tab)
Pass with 70
All CTS roofing exams are multiple choice with 70 to pass. Failed candidates may re-register for the next date.
Continental Testing Services: Illinois exams (opens in a new tab)
License
After you pass, complete the IDFPR licensure steps for the roofing contractor license and qualifying party designation.
How to prepare
- CTS's guide lists NRCA manuals but does not say whether the exam is open book, so plan on closed book and learn the material.
- Safety and employee protection is the biggest section on every roofing exam (25 of 80 residential, 25 of 130 unlimited): fall protection, ladders, hot-work and asbestos basics.
- Learn the Roofing Industry Licensing Act (225 ILCS 335): qualifying party, limited versus unlimited license scope, contracts and insurance.
- Steep-slope roofing systems (20) and roofing preparation and materials (12): shingles, underlayment, flashing and decking.
- Start with the free questions above to find your weak topics, then drill those first.
- Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
- Read every explanation, including for questions you got right, and look the section up in your own book.
What to study
This is a closed-book exam, so nothing comes into the exam room. Study from these:
Illinois Roofing Industry Licensing Act (225 ILCS 335) and RulesEssential
The state's roofing licensing law and rules; the rules, regulations and business practices topic comes from it.
NRCA Roofing Manual (2018 to 2021 editions)Essential
CTS lists the four NRCA manual volumes as the main roofing reference. Not freely readable.
Official reference list (as published by the testing agency)
- Illinois Roofing Industry Licensing Act (225 ILCS 335) and Rules
- NRCA Roofing Manual (4 volumes, 2018 to 2021 editions)
- NRCA Safety Manual, 3rd Edition (2012), and NRCA Pocket Guide to Safety (2015)
- NRCA Waterproofing Manual (2005) and Repair Manual for Low-Slope Membrane Roof Systems, 2nd Edition (2018)
- A Practical Guide to Handling Asbestos-Containing Materials (NRCA)
- NASCLA Contractors Guide to Business, Law and Project Management, 12th Edition (2017)
- Roofing Construction and Estimating (Atcheson, 1995)
What's on the exam
Official content outline from Continental Testing Services (CTS) (number of questions per topic):
| Topic | Questions | |
|---|---|---|
| Safety & Employee Protection | 25 | |
| Roofing Preparation & Materials | 12 | |
| Steep-Slope Roofing Systems | 20 | |
| Low-Slope Roofing Systems | 8 | |
| Rules, Regulations & Business Practices | 15 |
Exam day details
- Administered by Continental Testing Services (CTS) for the Illinois Department of Financial and Professional Regulation (IDFPR).
- Fee: $248
- 80 questions in 90 minutes; 70 to pass.
- Multiple choice, four answers per question; 70 to pass. Our topic counts come from CTS's May 2021 study guide.
- The Roofing Industry Licensing Act (225 ILCS 335) requires a qualifying party; limited (residential only) and unlimited (residential, commercial and industrial) licenses differ in scope.
- CTS gives roofing exams on scheduled dates for IDFPR applicants. Fees are not refundable and a missed exam is re-registered for the next date.
- Eligibility is set by the Act and IDFPR; check the IDFPR roofing page and apply there first.
Note: CTS's May 2021 study guide gives the topic counts but does not say whether the exam is open or closed book; we assume closed. The NRCA manuals are not freely readable, so our questions rest on the Roofing Industry Licensing Act and general roofing practice.
Frequently asked questions
What's on the Illinois residential roofing exam?
80 questions: safety and employee protection 25, steep-slope roofing systems 20, rules, regulations and business practices 15, roofing preparation and materials 12 and low-slope roofing systems 8.
How long is the exam?
90 minutes for 80 multiple-choice questions, with 70 to pass.
Is it open book?
CTS's study guide does not say, so treat it as closed book and confirm with CTS when you register.
Free questions with answers
Show all 10 free questions and answers
A crew is shingling a residential roof with a 9:12 slope. Which set of options does OSHA's steep-roof provision allow for protecting workers at the eave?
Answer: Guardrail systems with toeboards, safety nets, or a personal fall arrest system
1926.501(b)(11) covers roofs steeper than 4 in 12 and lists guardrails with toeboards, safety nets or personal fall arrest. Warning lines and safety monitors are options only on low-slope roofs under (b)(10), and flagging alone is not fall protection.
Reference: 29 CFR 1926 (OSHA Construction Standards), 1926.501(b)(11)
For OSHA purposes, a roof is treated as 'low-slope' when its pitch is no more than which value?
Answer: 4 in 12
1926.501(b)(10) applies to roofing work on low-slope roofs, defined in 1926.500 as a slope of 4 in 12 or less. Note this differs from the NRCA roofing-industry definition of low-slope (3:12 or less), so read which standard the question uses.
Reference: 29 CFR 1926 (OSHA Construction Standards), 1926.500(b) (low-slope roof) and 1926.501(b)(10)
A 3-tab shingle measures 12 inches by 36 inches and is installed with a 5-inch exposure. About how many shingles are needed to cover one square (100 sq ft)?
Answer: 80 shingles
Each shingle shows 36 in x 5 in = 180 sq in of exposed area. One square is 100 x 144 = 14,400 sq in, and 14,400 / 180 = 80 shingles. Dividing by the full 12-inch height of the shingle ignores the overlap and undercounts.
Reference: Atcheson, Roofing Construction and Estimating (1995), Concept: shingles per square
A roof measures 12.0 squares. The estimator adds 10 percent for waste and the shingles come 3 bundles per square. How many bundles should be ordered?
Answer: 40 bundles
12.0 x 1.10 = 13.2 squares; 13.2 x 3 = 39.6 bundles, which is rounded up to 40 because bundles are sold whole. 36 omits the waste, 39 rounds down and leaves the job short.
Reference: Atcheson, Roofing Construction and Estimating (1995), Concept: waste factor and bundle count
In NRCA terminology, a roof is generally classed as 'steep-slope' when its slope is greater than which value?
Answer: 3 in 12
NRCA treats roofs steeper than 3:12 as steep-slope and 3:12 or less as low-slope. This differs from OSHA's 4:12 break for fall protection, so note which standard applies.
Reference: NRCA Roofing Manual (2018-2021): Steep-Slope Roof Systems, Concept: steep-slope versus low-slope definition
A roof slope given as 8:12 means that the roof does which of the following?
Answer: Rises 8 inches vertically for every 12 inches of horizontal run
Slope is stated as rise per 12 inches of horizontal run. Reversing the numbers would describe a much steeper roof.
Reference: NRCA Roofing Manual (2018-2021): Steep-Slope Roof Systems, Concept: roof slope notation
What is the 'rake' of a gable roof?
Answer: The sloped edge of the roof along the gable end
The rake is the inclined edge at the gable end; the eave is the horizontal lower edge, the ridge is the top line, and the valley is the internal angle where slopes meet.
Reference: NRCA Roofing Manual (2018-2021): Steep-Slope Roof Systems, Concept: roof terminology
What is the minimum design slope that NRCA recommends for a low-slope roof deck to promote positive drainage?
Answer: 1/4 inch of rise per 12 inches of run
NRCA recommends a minimum design slope of 1/4 in 12 so water drains and does not pond. Deflection, construction tolerance and settlement can leave low spots on a deck designed dead level.
Reference: NRCA Roofing Manual (2018-2021): Membrane Roof Systems, Concept: positive drainage and minimum slope
What continuous bond amount must an applicant file for a limited roofing license under the Illinois Roofing Industry Licensing Act?
Answer: $10,000
Section 3(2)(d) requires a continuous bond of $10,000 for a limited license and $25,000 for an unlimited license. The $25,000 figure is the unlimited bond amount.
Reference: Illinois Roofing Industry Licensing Act (225 ILCS 335), Sec. 3(2)(d)
What is the maximum fine the Department may impose for each violation as part of disciplinary action under the Illinois Roofing Industry Licensing Act as currently written?
Answer: $15,000
Section 9.1(1) lets the Department take disciplinary action, including fines not to exceed $15,000 for each violation. Older study materials may show a lower figure, so use the current Act.
Reference: Illinois Roofing Industry Licensing Act (225 ILCS 335), Sec. 9.1(1)
Sources
- CTS: Roofer examination study guide (May 2021) (opens in a new tab)
- IDFPR: Roofing Contractor (opens in a new tab)
Questions last verified November 13, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.