Requirements at a glance
| Agency | NYC Department of Buildings; exams by CPS HR Consulting at Pearson VUE |
|---|---|
| Exam | Written: 100 questions, 4 hours, 70 to pass. Then a practical exam |
| Books allowed | None; closed book |
| Fees | $585 written exam fee per DOB's pages (older 2023 bulletins print $525), plus DOB license and registration fees |
Applicants for a New York City master plumber license from the NYC Department of Buildings. The license applies within the five boroughs; plumbers elsewhere in New York State are licensed by their county or city.
Official links
How to get licensed, step by step
Apply to DOB for the exam
Submit a typed exam application (form LIC41 or DOB NOW) with the exam fee to the NYC Department of Buildings. DOB reviews it before CPS HR can schedule you.
Schedule the written exam
CPS HR emails scheduling instructions in about 2 to 3 weeks. Tests are taken at Pearson VUE centers, and you have 6 months from your application date to sit. Each eligibility notice covers one attempt; after a fail you reapply and pay again.
CPS HR: NYC DOB exams and candidate bulletins (opens in a new tab)
Pass the written, then the practical
After the written exam you apply for the practical, a hands-on pipe assembly exam. The practical is a separate fee and is not covered by our practice tests.
NYC DOB: obtain a Master Plumber license (opens in a new tab)
Background investigation and license
DOB runs a background investigation, then issues the license on payment of the license fee. Before you apply you need 7 years of plumbing experience within the 10 years before application, with at least 2 as a registered journeyman plumber (DOB lists shorter routes for engineering degree holders, licensed architects/engineers and plumbing inspectors).
NYC DOB: obtain a Master Plumber license (opens in a new tab)
How to prepare
- The exam is closed book, so you need to know the 2022 NYC Plumbing Code from memory. Gas piping (29) is the largest section, followed by equipment (23) and drainage (21).
- NYC codes differ from the model IPC: use NYC Plumbing Code chapter numbers, not IPC numbers, when you study.
- Start with the free questions above to find your weak topics, then drill those first.
- Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
- Read every explanation, including for questions you got right, and look the section up in your own book.
What to study
This is a closed-book exam, so nothing comes into the exam room. Study from these:
2022 New York City Plumbing CodeEssential
The main reference for the master plumber exam. Free to read online, not allowed in the master plumber exam room.
2022 NYC Plumbing Code (UpCodes, free to read) (opens in a new tab)
2022 New York City Fuel Gas CodeEssential
Gas piping is the largest section of the master plumber exam.
2022 NYC Fuel Gas Code (UpCodes, free to read) (opens in a new tab)
2022 New York City Building Code (Chapters 1 and 33, Appendices G and Q)
Permits, inspections and site safety items on the master plumber outline.
2022 NYC Building Code (UpCodes, free to read) (opens in a new tab)
Official reference list (as published by the testing agency)
- 2022 NYC Plumbing Code (PC), Chapters 1 and 3 to 13 and Appendix E
- 2022 NYC Fuel Gas Code (FGC), Chapters 1, 3 and 4
- 2022 NYC Building Code (BC), Chapters 1 and 33 and Appendices G and Q
- 2022 NYC Administrative Code Title 28, Chapters 1 to 3 (per the 7/24/2023 candidate bulletin)
What's on the exam
Official content outline from CPS HR Consulting (number of questions per topic):
| Topic | Questions | |
|---|---|---|
| Drainage | 21 | |
| Equipment | 23 | |
| Gas Piping | 29 | |
| Water Supply | 17 | |
| Fire Protection | 10 |
Exam day details
- Administered by CPS HR Consulting for the NYC Department of Buildings (tests at Pearson VUE).
- Fee: $585 written exam fee per DOB's Master Plumber and Gas Work Qualification pages (the 2023 candidate bulletins and an older gas work PDF still print $525). DOB license, background investigation and registration fees are separate.
- 100 written questions in 4 hours; 70 correct (70%) to pass. The exam is closed book.
- This is the written exam only. After you pass it you take a hands-on practical exam (pipe assemblies), then a background investigation, before DOB issues the license.
- The content outline is from the CPS HR candidate information bulletin dated 7/24/2023, for candidates authorized on or after 5/1/2023.
- Apply to DOB first (form LIC41 or DOB NOW). CPS HR then emails scheduling instructions in about 2 to 3 weeks, and you have 6 months from the date of your application to sit.
- Each eligibility notice covers one attempt. If you fail, you must reapply to DOB and pay the exam fee again.
- Pearson VUE test centers: CPS HR candidate line 855-224-6977, NYCDOB@cpshr.us.
Note: The written fee is $585 on DOB's page but $525 in the 2023 bulletin, and the code editions come from that 2023 bulletin. Check the current CPS HR bulletin before you test.
Frequently asked questions
What is on the NYC master plumber written exam?
100 questions: gas piping 29, equipment 23, drainage 21, water supply 17 and fire protection 10, all from the NYC codes.
Is there a statewide plumber license in New York?
No. The NYC Department of Buildings licenses master plumbers for the five boroughs. Outside the city, counties and cities such as Westchester, Nassau and Suffolk run their own licensing.
Is the exam open book?
No. The master plumber written exam is closed book. (The Gas Work Qualification exam is the open-book one.)
Free questions with answers
Show all 10 free questions and answers
A 2-inch horizontal fixture drain is being roughed in. What is the minimum slope the NYC Plumbing Code allows?
Answer: 1/4 inch per foot
Table 704.1 groups pipe sizes of 2-1/2 inches or less at a minimum 1/4 inch per foot. The 1/8 inch per foot figure applies only to 3-inch through 6-inch pipe.
Reference: 2022 NYC Plumbing Code, Table 704.1
The effluent level control in an ejector pit must be adjusted so that the effluent never rises within how far of the invert of the gravity drain inlet into the sump?
Answer: 2 inches
Section 712.3.4 requires the level control to keep effluent from rising to within 2 inches of the invert of the gravity drain inlet.
Reference: 2022 NYC Plumbing Code, 712.3.4
A temperature and pressure relief valve is being installed on a storage water heater. Where must the temperature relief element be located in the tank?
Answer: Where it is actuated by the water in the top 6 inches of the tank
Section 504.4.1 requires the valves in the shell of the tank with the temperature relief located so the water in the top 6 inches of the tank actuates it. No check or shutoff valve may sit between the relief valve and the tank.
Reference: 2022 NYC Plumbing Code, 504.4.1
What is the maximum temperature setting allowed for a temperature relief valve on a storage water heater?
Answer: 210 degrees F
Section 504.5 limits the temperature setting to not more than 210 degrees F (99 degrees C). The pressure setting may not exceed the tank's rated working pressure, and the relieving capacity must equal or exceed the heater's input.
Reference: 2022 NYC Plumbing Code, 504.5
An underground water service pipe runs parallel to a building drain. Without a code exception, what separation is required?
Answer: 5 feet of undisturbed or compacted earth
Section 603.2 requires 5 feet of undisturbed or compacted earth between the service pipe and a building sewer or drain, with exceptions such as a 12-inch vertical offset above the drain, same-trench installation with listed drain materials, or sleeving at crossings.
Reference: 2022 NYC Plumbing Code, 603.2
A booster pump in a pressure booster system must be protected by a low-pressure cutoff. At what suction-side pressure is it intended to act?
Answer: A positive pressure of 10 psi or less on the suction side
Section 606.5.5 requires a low-pressure cutoff on house pumps filling tanks and on booster pumps to prevent a vacuum or negative pressure on the suction side when positive pressure of 10 psi or less occurs.
Reference: 2022 NYC Plumbing Code, 606.5.5
What is the maximum design operating pressure for gas piping inside a building, before any exception applies?
Answer: 1/2 psig
Section 402.6 limits piping inside buildings to 1/2 psig. Up to 5 psig is allowed where the system serves appliances that need more than 1/2 psig, which is why 5 psig is a tempting but conditional answer.
Reference: 2022 NYC Fuel Gas Code, 402.6
A gas distribution line inside a building will operate at 2 psig to serve a boiler. What type of joints must the distribution piping have?
Answer: Welded, since pressure over 1/2 psig must be welded
Section 403.1.1 requires gas distribution piping operating over 1/2 psig to be welded (manufactured, listed gas trains supplied with the appliance may be threaded). Section 404.21.2 repeats this.
Reference: 2022 NYC Fuel Gas Code, 403.1.1
Which of these fittings or joints is prohibited on gas piping under the NYC Fuel Gas Code?
Answer: A threaded close nipple
Section 403.10.1.1 prohibits unions and threaded close nipples, with an exception for unions downstream of the appliance valve (Section 411.1.6).
Reference: 2022 NYC Fuel Gas Code, 403.10.1.1
During construction of a new building that will require a standpipe system, at what height of the topmost working deck must a standpipe be kept in a state of readiness?
Answer: 75 feet or greater above the ground
Section 3303.8, Item 1 (Chapter 33 as amended by Local Law 77 of 2023, effective June 10, 2023) requires a permanent or temporary standpipe meeting Section 905 to be kept in a state of readiness once the topmost working deck of a new building reaches 75 feet or more above the ground.
Reference: 2022 NYC Building Code, 3303.8
Sources
- NYC Department of Buildings: exams and qualifications (opens in a new tab)
- NYC DOB: obtain a Master Plumber license (opens in a new tab)
- CPS HR Consulting: NYC DOB license exams and candidate bulletins (opens in a new tab)
Questions last verified November 15, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.