Kentucky licensing exam

Kentucky Journeyman Plumber Exam: Practice Test & Licensing Guide

Kentucky's journeyman plumber exam, given by DHBC: written questions on plumbing principles, KRS 318 and 815 KAR 20, a pipe-sizing drawing and a practical. 75% to pass each portion.

Questions
Not published by Kentucky
Time limit
Not published by Kentucky
Passing score
75%

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10Basic Principles of Plumbing

Under the definitions in 815 KAR 20:010, what is the trap seal of a fixture trap?

Requirements at a glance

AgencyKentucky DHBC, Division of Plumbing (exam given by DHBC)
Experience2 years as an apprentice, or an approved course plus 1 year
ExamWritten, pipe-sizing drawing and practical portions, 75% on each; question count not published
ReferenceKentucky State Plumbing Code (815 KAR 20), KRS 318, 815 KAR 2
Fees$50 exam, $60 license

Applicants for a Kentucky journeyman plumber license from the Department of Housing, Buildings and Construction.

How to get licensed, step by step

  1. Qualify

    Journeyman: 2 years as an apprentice, or an approved course plus 1 year. Master: 2 years as a journeyman in the past 5 years plus 2 years under a master plumber, or an engineer or other-state path.

    815 KAR: DHBC administrative regulations (opens in a new tab)

  2. Register for the journeyman plumber exam

    Send DHBC Form PLB-3 and the non-refundable exam fee. Exams are held in February, May, August and November at regional sites, and applications must be in 3 weeks before the exam; seats are first come, first served. Sites include Louisville (Local 502), Reidland (184), Lexington (452), Owensboro (633), Hazard CTC and Erlanger (Enzweiler).

    Kentucky Department of Housing, Buildings and Construction (DHBC) (opens in a new tab)DHBC: Plumbing exam schedule (opens in a new tab)815 KAR: DHBC administrative regulations (opens in a new tab)

  3. Pass every portion

    You need the passing score on each portion (written, pipe-sizing drawing and, for journeymen, the practical). You have 1 year from your first notice to finish, and a passing score is valid for 3 years.

    815 KAR: DHBC administrative regulations (opens in a new tab)

  4. Get licensed

    Send DHBC your passing results and the license fee ($60 journeyman, $250 master).

    Kentucky Department of Housing, Buildings and Construction (DHBC) (opens in a new tab)

How to prepare

  • Kentucky's State Plumbing Code is the set of regulations in 815 KAR 20. Read the sections on drainage, venting, water supply and fixtures.
  • The written part also covers KRS Chapter 318 (plumber licensing) and 815 KAR 2.
  • For the practical you bring your own plumbing materials; DHBC tells you what to bring in your notice of examination.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

Books for this exam

This is an open-book exam: you can bring the references below, and most questions come from 815 KAR 20. Tabs and highlighting are allowed. Free online copies are read-only and can't be used in the exam room.

Official reference list (as published by the testing agency)
  • Kentucky State Plumbing Code (815 KAR 20)
  • Kentucky Revised Statutes Chapter 318 (plumbers)
  • 815 KAR 2 (plumbing licensing and administration)

What's on the exam

Estimated topic weighting. No official breakdown is published:

TopicQuestions
Basic Principles of Plumbing25
Kentucky Plumbing Law (KRS 318)10
Plumbing Administration (815 KAR 2)5
Kentucky State Plumbing Code (815 KAR 20)40
Pipe Sizing from Drawings20

Exam day details

  • Administered by Kentucky Department of Housing, Buildings and Construction (Division of Plumbing).
  • Fee: $50 non-refundable to DHBC per exam; license fee $60 (815 KAR 20:030).
  • Written questions on basic principles of plumbing, KRS Chapter 318, 815 KAR 2 and 815 KAR 20, a pipe-sizing drawing, and a practical section where you bring your own plumbing materials (815 KAR 20:030). Our practice tests cover the written portion.
  • You need 75% on each portion. If you pass some portions but not all, you may retake only the failed portion (full fee each time). A passing score is valid for 3 years.
  • Journeyman license: 2 years as an apprentice, or an approved course plus 1 year. License fee $60.
  • Exams are held in February, May, August and November at union training centers and colleges. Applications are due 3 weeks ahead and seats are first come, first served; DHBC lists the practical materials to bring at least 1 week ahead.

Note: DHBC publishes no question count, time limit, reference list or topic weights for the plumbing exams, and does not say whether they are open book. The question count, time and open-book setting here are our practice values, and the topic weights are our estimate from 815 KAR 20:030; the pass scores, fees and schedule are from that regulation, form PLB-3 and the DHBC exam schedule (docs/sources/kentucky/gap/plb-schedule2.txt). Ask DHBC Plumbing at 502-573-0397 for the exam format.

Frequently asked questions

What are the parts of the Kentucky journeyman plumber exam?

A written portion, a drawing where you insert pipe sizes, and a practical you do with your own materials. Each needs 75%.

Can I retake only the part I failed?

Yes. Within one year of your first notice you can retake a failed portion by paying the full exam fee again.

How much does it cost?

The exam fee is $50 and the license fee is $60.

Free questions with answers

Show all 10 free questions and answers
  1. Under the definitions in 815 KAR 20:010, what is the trap seal of a fixture trap?

    Answer: The vertical distance between the crown weir and the top of the dip of the trap

    The code defines trap seal as the vertical distance between the crown weir and the top of the dip. It is not the trap-to-vent length (that is governed by the distance table in 815 KAR 20:090 Section 2(11)) and not the drop from the fixture outlet.

    Reference: 815 KAR 20:010, Section 1(223)

  2. A short pipe is connected upward from a soil stack to the vent stack so that pressure changes in the stack are relieved. What does 815 KAR 20:010 call this pipe?

    Answer: Yoke vent

    Section 1(248) defines a yoke vent as a pipe connecting upward from a soil or waste stack to a vent stack to prevent pressure changes in the stack. The loop, circuit and wet vents each serve fixture branches and are defined separately in Section 1.

    Reference: 815 KAR 20:010, Section 1(248)

  3. Which backflow hazard level does 815 KAR 20:120 apply to a connection with potential contamination by a toxic substance or disease-causing organism?

    Answer: Severe hazard

    Section 1(7)(j) of 815 KAR 20:120 sets three degrees: severe for toxic substances or disease-causing organisms, moderate for nontoxic but objectionable substances, and minor for generally nontoxic, nonobjectionable substances that might make a consumer question water quality. The degree of hazard decides which protection is required.

    Reference: 815 KAR 20:120, Section 1(7)(j)

  4. An atmospheric type vacuum breaker serves a laundry machine without a built-in vacuum breaker. How high above the flood level of the machine must its critical level be?

    Answer: At least 6 inches

    The critical level settings table in Section 1(7)(e) lists laundry machines at CL at least 6 inches above the flood level of the machine. Cup beverage vending machines, steam tables and lawn sprinklers need 12 inches.

    Reference: 815 KAR 20:120, Section 1(7)(e)

  5. A journeyman plumber's license expired 100 days ago and was not renewed. What does KRS 318.054(4) allow?

    Answer: Renewal on payment of the renewal fee and a $3 revival fee, with proof of continuing education

    A licensee who fails to renew before expiration may renew by paying the renewal fee, a revival fee ($3 for a journeyman, $5 for a master), and showing continuing education. If renewal and revival fees are not paid within 180 days after expiration the license is canceled by operation of law and can be reinstated only on payment of delinquent fees plus a $6 journeyman or $10 master fee.

    Reference: KRS Chapter 318, KRS 318.054(4)

  6. How much experience must a department plumbing inspector have under KRS 318.090?

    Answer: At least eight years as a journeyman or master plumber, and a license under the chapter at appointment

    KRS 318.090(2) requires at least eight years of experience as a journeyman or master plumber and a current license at the time of appointment. KRS 318.140(2) sets the same eight-year rule for local government plumbing inspectors.

    Reference: KRS Chapter 318, KRS 318.090(2)

  7. A journeyman plumber completed 10 hours of approved continuing education in one year. How much of the excess can be carried forward under 815 KAR 2:010?

    Answer: The 4 excess hours, up to a total carry-forward of 12 hours

    Section 1(3) lets a licensee who earns more than the annual requirement carry the excess into the two successive educational years, limited to a total of 12 hours. With a 6-hour requirement, the 4 excess hours carry forward in full.

    Reference: 815 KAR 2:010, Section 1(3)

  8. What is the maximum distance from the bottom of a fixture to the dip of its trap seal under 815 KAR 20:090?

    Answer: Ten inches

    Section 2(1) requires each fixture to be separately trapped by a water seal trap placed as near as possible to the fixture, not to exceed ten inches from the bottom of the fixture to the dip of the seal.

    Reference: 815 KAR 20:090, Section 2(1)

  9. A three compartment sink is being roughed in. What minimum trap size does 815 KAR 20:080 require for the sink?

    Answer: 2 inches

    The table in 815 KAR 20:080 Section 1 lists Sink: three compartment at 2 inches for trap and branch (both columns). A residence kitchen sink is 1 1/2 inches, and a service sink is 3 inches.

    Reference: 815 KAR 20:080, Section 1 (table)

  10. What is the minimum size of the branch pipe to a flush valve type water closet under the schedule in 815 KAR 20:120 Section 8?

    Answer: 1 inch

    The fixture branch schedule gives a tank type water closet at 1/2 inch, a flush valve type water closet at 1 inch, a single head shower at 3/4 inch and a bathtub at 1/2 inch.

    Reference: 815 KAR 20:120, Section 8(2) schedule

Sources

Questions last verified November 15, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.