Illinois licensing exam

Chicago Plumber Written Exam: Practice Test & Licensing Guide

Practice for the written part of the City of Chicago journeyman plumber exam given by CTS: 3 hours covering plumbing theory, the Chicago Plumbing Code, drawings and repairs. 70 to pass. CTS's guide is from 2013 and Chicago's code has since changed.

Questions
Not published by Illinois
Time limit
3 hours
Passing score
70%
Books
Closed book
What to study ↓

Full practice test: $19One-time payment · 12 months of access

Try 10 free practice questions

No sign-up. Every answer explains the rule and tells you where to find it in your book.

Question 1 of 10Plumbing Theory, Practices & Job Safety

A crew is digging a 6-foot-deep trench in ordinary soil to lay a water service. Before anyone works in the trench, what does the OSHA excavation standard require?

Requirements at a glance

AgencyCity of Chicago Department of Buildings; exam by Continental Testing Services (CTS)
ExperienceAge 21 and 4 years as a plumber's apprentice, with a letter from a licensed, bonded plumbing contractor and a copy of your apprentice license
ExamWritten exam timed at 3 hours, 70 to pass; question count not published. A separate practical exam follows
Book allowedClosed book; CTS provides any references you need
Fee$175 for Chicago or Illinois licensed apprentices (CTS); not refundable. Practical retake $74.50

Plumbers applying to the City of Chicago for a journeyman plumber license: age 21 with 4 years as a plumber's apprentice, verified by a letter from a licensed, bonded plumbing contractor. The written exam comes first; a separate practical exam follows.

How to get licensed, step by step

  1. Confirm the code edition

    CTS's guide is from 2013 and cites the 2003 and 2006 Chicago Plumbing Code. Chicago's code has since changed, so confirm the current edition and exam content with CTS and the Department of Buildings.

    Continental Testing Services: City of Chicago exams (opens in a new tab)City of Chicago Department of Buildings: trade licenses (opens in a new tab)

  2. Document your apprenticeship

    Get the employer letter showing 4 years as a plumber's apprentice, with the contractor's license number and a copy of your apprentice license.

    City of Chicago Department of Buildings: trade licenses (opens in a new tab)

  3. Register and pay

    Apply by the deadline for a scheduled CTS date. There are no make-up exams and no refunds.

    Continental Testing Services: City of Chicago exams (opens in a new tab)

  4. Pass written, then practical

    Pass the written exam with 70 before applying for the separate practical exam. Our bank covers the written part only.

    CTS: Chicago Plumber study guide (2013) (opens in a new tab)

How to prepare

  • Edition caveat: CTS's guide is from 2013 and keyed to the 2003 and 2006 Chicago Plumbing Code, and Chicago's code has changed since. Do not rely on old section numbers without checking the current code.
  • Plumbing systems (Chapters 18-29: fixtures, water heaters, supply, drainage, vents, traps, storm drainage, pools) is 44% of the exam. Plumbing theory and job safety is 20%.
  • CTS does not publish a question count, so our test length is a practice setting only.
  • Start with the free questions above to find your weak topics, then drill those first.
  • Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
  • Read every explanation, including for questions you got right, and look the section up in your own book.

What to study

This is a closed-book exam, so nothing comes into the exam room. Study from these:

  • Chicago Plumbing Code (2003/2006 editions in CTS's 2013 guide)Essential

    CTS's guide is keyed to the 2003 and 2006 Chicago Plumbing Code. Chicago's code has since changed, so confirm the current edition with CTS and the Department of Buildings.

Official reference list (as published by the testing agency)
  • Chicago Plumbing Code (2003/2006 editions named in CTS's 2013 guide; Chicago has since changed its codes)
  • Blankenbaker, Modern Plumbing, 6th Edition (2005)
  • Ripka, Plumbing Design and Installation, 3rd Edition (2006)
  • Mathematics for Plumbers and Pipefitters, 7th or 6th Edition
  • Blueprint Reading and Drafting for Plumbers, 2nd Edition
  • Audel Plumbers Pocket Manual, 10th Edition

What's on the exam

Official content outline from Continental Testing Services (CTS) (number of questions per topic):

TopicQuestions
Plumbing Theory, Practices & Job Safety20
Code Requirements for Plumbers & Contractors (Ch. 4-332)2
Plumbing Systems (Ch. 18-29, Articles I-XII)44
Rehabilitation Requirements (Ch. 13-200: 420, 460)5
Drawings, Charts & Plans8
Cutting & Assembling Plumbing System Components12
Troubleshooting, Maintenance & Repairs10

The outline totals 101; the other items on the 100-question exam are unscored or unassigned.

Exam day details

  • Administered by Continental Testing Services (CTS) for the City of Chicago Department of Buildings.
  • Fee: $175 for plumbers licensed as an apprentice in Chicago or Illinois; $225 for others. The practical exam is separate (retake $74.50).
  • The written exam is timed at 3 hours; 70 to pass. CTS does not publish the number of questions, so our length is a practice setting only.
  • Closed book: CTS says any references you need are provided with the exam, and no calculators or printed materials other than those provided are allowed.
  • Topic weights are as printed by CTS (they add to 101% in the guide). Plumbing systems is the largest at 44%, then plumbing theory and job safety at 20%.
  • Candidates must pass the written exam before applying for the separate practical exam.
  • Edition check: CTS's study guide is from 2013 and is keyed to the 2003 and 2006 Chicago Plumbing Code. Chicago's code has since changed, so confirm the current code and exam content with CTS and the Chicago Department of Buildings.
  • Chicago honours IDPH plumber licenses when the employer holds a Chicago plumbing contractor license.

Note: CTS does not publish the written exam's question count, and its guide is from 2013, keyed to the 2003/2006 Chicago Plumbing Code. Chicago's code has since changed, so our length is an estimate and the code content should be confirmed with CTS and the Department of Buildings.

Frequently asked questions

Which code is the Chicago plumber exam based on?

CTS's guide is from 2013 and cites the 2003 and 2006 Chicago Plumbing Code. Chicago's code has since changed, so confirm the current edition with CTS and the Department of Buildings.

How many questions are on the Chicago plumber exam?

CTS does not publish a question count. The written exam is timed at 3 hours with 70 to pass.

Is there a practical exam?

Yes. It is separate and you must pass the written exam first. Our questions cover the written part only.

Free questions with answers

Show all 10 free questions and answers
  1. A crew is digging a 6-foot-deep trench in ordinary soil to lay a water service. Before anyone works in the trench, what does the OSHA excavation standard require?

    Answer: A protective system, such as sloping, shoring or a box, unless in stable rock

    29 CFR 1926.652(a)(1) requires a protective system for excavations 5 feet or deeper unless they are cut entirely in stable rock. A sign or barricade does not hold back a cave-in, and a ladder is only the means of egress.

    Reference: 29 CFR Part 1926 (OSHA Construction Standards), 1926.652(a)(1)

  2. While digging a sewer trench, where should the excavated soil (spoil) be kept?

    Answer: At least 2 feet back from the trench edge, or held back by a retaining device

    29 CFR 1926.651(j)(2) requires excavated material and equipment to be kept at least 2 feet from the edge of the excavation or otherwise restrained so it cannot fall or roll in. Spoil at the lip adds load to the wall and can fall onto workers.

    Reference: 29 CFR Part 1926 (OSHA Construction Standards), 1926.651(j)(2)

  3. Under Chicago Municipal Code Chapter 4-332, how much continuing education must a licensed plumber complete as a condition of each annual license renewal?

    Answer: Four hours in plumbing

    Section 4-332-140(c) requires each licensed plumber to certify or show completion of four hours of continuing education in plumbing for each annual renewal, in courses supervised directly by another licensed plumber (also referenced in 4-332-030(1)). Two hours is the additional minimum the Commissioner may require of a plumber who violated the chapter or the building provisions, not the base requirement.

    Reference: Municipal Code of Chicago (2026, amlegal S-75), 4-332-140(c)

  4. Why should a plumber survey existing piping and fixtures before the plan for a building remodel is finalized?

    Answer: To find the materials, sizes and conditions that new work must tie into

    Remodel plumbing connects to old pipe, so the material, size, grade and condition of what is there drives the scope, the fittings needed and any code upgrades. The other items do not affect piping design.

    Reference: CTS Chicago Plumber Candidate Guide (2013), Part II, content area IV (Rehabilitation Requirements, Ch. 13-200 sec. 460); general practice

  5. At a scale of 1/8 inch = 1 foot, how long on the drawing is a 36-foot pipe run?

    Answer: 4 1/2 inches

    36 ft x 1/8 in = 4.5 in. Using 1/4 inch gives 9 in; dividing 36 by 12 gives 3 in.

    Reference: CTS Chicago Plumber Candidate Guide (2013), Part II, content area V (Drawings, Charts & Plans)

  6. Why is the inside edge of a cut piece of copper tube reamed before it is soldered?

    Answer: To remove the burr that restricts flow and causes erosion

    Cutting leaves a burr inside the tube that narrows the bore and creates turbulence and erosion. Reaming removes it. It does not affect the outside diameter or the temper.

    Reference: CTS Chicago Plumber Candidate Guide (2013), Part II, content area VI (Cutting & Assembling Plumbing System Components)

  7. When a no-hub coupling is tightened on cast iron soil pipe, what standard torque do the usual clamp-type couplings call for?

    Answer: 60 inch-pounds, using a calibrated torque wrench

    Standard shielded no-hub couplings (CISPI 310 type) are tightened to 60 in-lb with a torque wrench; follow the manufacturer's instructions for other types. Over- or under-tightening causes leaks or damage.

    Reference: CTS Chicago Plumber Candidate Guide (2013), Part II, content area VI (Cutting & Assembling Plumbing System Components)

  8. The T&P relief valve on a water heater drips every time the heater fires, and the house has a pressure reducing valve with a check. What is the most likely cause and fix?

    Answer: Thermal expansion in a closed system; add an expansion tank

    A closed system has no place for heated water to expand, so the pressure rises and the relief valve opens. An expansion tank gives the volume a place to go. Valve size and thermostat settings do not fix it.

    Reference: CTS Chicago Plumber Candidate Guide (2013), Part II, content area VII (Troubleshooting, Maintenance & Repairs)

  9. A new water service pipe has just been laid and joined in its trench. When may the trench be backfilled over the pipe?

    Answer: Only after it is tested and inspected, with the full length left exposed until then

    Work that will be concealed must stay exposed until it has been tested and inspected, so the inspector can see every joint along the whole service. Leaving only the ends exposed hides most of the joints, and the contractor's own test does not replace the inspection. The CTS guide's sample key (2002 code) says the same; confirm current Chicago inspection procedures on the job.

    Reference: CTS Chicago Plumber Candidate Guide (2013), Part II, content area III (Plumbing Systems); Part III sample key on service pipe inspection (cites 2002 code 18-29-601.2, 601.3)

  10. A roof drains 1,000 square feet in a rainfall of 4 inches per hour. Using 0.0104 gallons per minute per square foot per inch of rain per hour, what is the flow to the drain?

    Answer: About 41.6 gallons per minute

    Flow = 1,000 sq ft x 4 in/hr x 0.0104 = 41.6 gpm. Leaving out the rainfall rate gives 10.4, and slipping the decimal gives 4.2 or 416.

    Reference: CTS Chicago Plumber Candidate Guide (2013), Part II, content area III (Plumbing Systems, Ch. 18-29 Articles I-XII); general plumbing principle

Sources

Questions last verified November 13, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.