Requirements at a glance
| Agency | California Contractors State License Board (CSLB); exams by PSI |
|---|---|
| Experience | 4 years of journey-level experience in the trade within the last 10 years |
| Exams | C-36 Plumbing trade exam, plus the Law and Business exam |
| Format | Closed book, 4-choice, 3.5 hours per exam; question count and pass score not published |
| Study references | 2025 California Plumbing Code (UPC 2024 base) and Mechanical Code |
| Fees | $450 application (one classification); $200 (sole owner) or $350 initial license fee after you pass; $25,000 contractor bond; fingerprints |
Qualifiers for a California C-36 Plumbing contractor license. Taken together with the Law and Business exam. California has no statewide journey plumber license.
Official links
How to get licensed, step by step
Pick your classification
Find the CSLB classification for your work. The qualifier named on the license needs 4 years of journey-level experience in it within the past 10 years.
Apply to CSLB
Submit the $450 application with your experience verification. CSLB reviews it and refers you to test.
California Contractors State License Board (CSLB) (opens in a new tab)CSLB: List of all fees (opens in a new tab)
Schedule Law and Business and the C-36 exam with PSI
Book both exams with PSI. Pass both within 18 months of acceptance; each exam sitting costs $51.43 paid to PSI. Passing results stay good for 5 years.
PSI: schedule your CSLB exam (877-392-6422) (opens in a new tab)
Bond, fees and fingerprints
After you pass, CSLB sends a Bond and Fee letter: file the $25,000 contractor bond, pay the initial license fee and complete fingerprints to receive your license.
How to prepare
- The CSLB exams are closed book and CSLB doesn't publish question counts or the passing score, so aim for steady scores well above 80% on our practice tests rather than a bare minimum.
- Use CSLB's free study guide for your classification: it lists the sections, approximate weights and the references the questions come from.
- Every license needs two exams (Law and Business plus the trade exam). Pass both within 18 months of CSLB accepting your application.
- Underground and rough systems and planning and estimating are each about 22%: practice drain and vent sizing, fixture units and slope.
- Know USA/811 underground utility notice before digging (Government Code 4216) and trench safety.
- Start with the free questions above to find your weak topics, then drill those first.
- Take at least two full timed simulations before exam day. Timing is where most people fail open-book exams.
- Read every explanation, including for questions you got right, and look the section up in your own book.
What to study
This is a closed-book exam, so nothing comes into the exam room. Study from these:
CSLB examination study guide for your classificationEssential
Free from CSLB. Lists the sections, approximate weights and references for the exam.
2025 California Building, Electrical, Plumbing and Mechanical Codes
Not allowed in the exam room. CSLB's study guides cite the 2025 California codes (effective January 1, 2026).
Official reference list (as published by the testing agency)
- CSLB C-36 Plumbing study guide (3/2025)
- 2025 California Plumbing Code (UPC 2024 base), Mechanical Code, Building Code and CALGreen
- California MUTCD (Rev 8); USA/811 and Government Code 4216 (underground utility notice)
What's on the exam
Official content outline from PSI Services (number of questions per topic):
| Topic | Questions | |
|---|---|---|
| Planning and Estimating | 22 | |
| Underground and Rough Systems | 22 | |
| Finish Plumbing Installations | 20 | |
| Service, Repair, and Remodel | 19 | |
| Safety | 17 |
Exam day details
- Administered by PSI Services for the California Contractors State License Board (CSLB).
- Fee: $450 CSLB application fee (one classification), paid to CSLB. Separately, each exam sitting costs $51.43, paid directly to PSI (a retake costs it again, after a 21-day wait). Cancel or reschedule at least 2 days ahead to keep your fee. The $200 or $350 initial license fee and the $25,000 bond come after you pass.
- Closed book: no code books, notes or calculators from home. PSI provides a calculator, and every question has four choices with no penalty for guessing.
- You get 3.5 hours per exam and see your result on screen. A failing report breaks your performance down by section.
- Every license needs two exams: Law and Business plus the trade exam for the classification (C-61 has no trade exam). You must pass both within 18 months of CSLB accepting your application, and passing results stay good for 5 years.
- The qualifier needs 4 years of journey-level experience within the last 10 years. Each exam sitting costs $51.43 paid to PSI, and you must cancel or reschedule at least 2 days before the appointment to keep the fee.
- Work worth $500 or more (labor and materials) requires a California contractor license.
Note: CSLB does not publish the number of questions or the passing score for its exams. The 100-question practice length is ours, and the pass line shown in our practice tests is only a study target. Check CSLB's study guide and the PSI bulletin for current details.
Frequently asked questions
What's on the California C-36 exam?
CSLB lists approximate weights: planning and estimating 22%, underground and rough systems 22%, finish plumbing installations 20%, service, repair and remodel 19% and safety 17%.
Which plumbing code does the C-36 exam use?
The study guide cites the 2025 California Plumbing Code, built on the 2024 Uniform Plumbing Code, in effect from January 1, 2026. You can't bring it into the exam.
Does California have a journeyman plumber exam?
Not statewide. Plumber licensing below the contractor level is handled locally. The state exam is the CSLB C-36 contractor exam.
How many questions are on the exam and what score do I need?
CSLB doesn't publish either number, so we don't state them. Each exam is closed book with 4-choice questions and 3.5 hours to finish. Your result appears on screen, and a failing report shows how you did by section.
Free questions with answers
Show all 10 free questions and answers
A takeoff calls for 240 feet of 3/4-inch Type L copper tube, which is sold in 20-foot sticks. The estimator adds 10 percent for cuts and waste. How many sticks should be ordered?
Answer: 14 sticks
240 ft x 1.10 = 264 ft. 264 / 20 = 13.2 sticks, and you cannot buy a fraction of a stick, so round up to 14. 12 ignores the waste allowance, 13 rounds 13.2 down (leaving the job short), and 15 would come from a 20 percent allowance (288 / 20 = 14.4).
Reference: General trade practice, Material takeoff calculation (waste allowance)
A journeyman's base wage is $38.00 per hour and the labor burden (payroll taxes, workers' compensation, insurance and benefits) is 32 percent of wages. What is the cost of 120 hours of this labor for a bid?
Answer: $6,019.20
Burdened rate = 38.00 x 1.32 = $50.16 per hour. 120 h x $50.16 = $6,019.20. $4,560 is wages only (38 x 120); $1,459.20 is the burden alone (38 x 0.32 x 120); $5,016 uses 100 h of burdened labor by mistake.
Reference: General trade practice, Estimating calculation (labor burden)
What is the minimum uniform slope the CPC requires for a building sewer in normal conditions?
Answer: 1/4 inch per foot
CPC 718.1 requires building sewers to run in practical alignment at a uniform slope of not less than 1/4 inch per foot toward the point of disposal. A 1/8 inch per foot slope is allowed only where impractical and approved by the AHJ.
Reference: 2025 California Plumbing Code, Section 718.1
Gas piping inside a building must not be installed in or through which of the following?
Answer: A clothes chute, chimney, gas vent, dumbwaiter, elevator shaft or air duct
CPC 1210.3.4 prohibits gas piping in or through a clothes chute, chimney or gas vent, dumbwaiter, elevator shaft or air duct, other than combustion air ducts (and 1210.3.3.1 allows accessible spaces above a fixed ceiling, with no valves in them).
Reference: 2025 California Plumbing Code, Section 1210.3.4
A temperature and pressure relief valve discharge pipe is being installed on a new storage water heater. Which feature is required by the CPC?
Answer: It has no valves or isolation and is at least the size of the valve outlet
CPC 608.5 says discharge piping from a relief valve may have no valves, obstructions or means of isolation, must be not smaller than the valve outlet, and must discharge by gravity through an air gap, pointing down. A valve or cap in the line could block the relief and let the tank rupture.
Reference: 2025 California Plumbing Code, Section 608.5
A T&P relief valve on a water heater discharges to the outside of the building. Where may the end of the discharge pipe terminate?
Answer: Between 6 inches and 2 feet above the ground, pointing downward
CPC 608.5 requires the discharge pipe end to be not more than 2 feet and not less than 6 inches above the ground and to point down, discharging so as not to cause injury or damage. The end of the line must never be threaded or capped.
Reference: 2025 California Plumbing Code, Section 608.5
After a repair, a section of potable water piping with a working pressure of 65 psi is tested with water. What are the minimum test pressure and test duration the CPC requires?
Answer: At least 65 psi, with no leakage for at least 15 minutes
CPC 609.4 requires a potable water test pressure greater than or equal to the system's working pressure (here 65 psi), and the piping must hold with no leakage for not less than 15 minutes. 50 psi is the minimum for an air test, not a water test; 5 minutes is too short; 100 psi for 24 hours exceeds the code minimum.
Reference: 2025 California Plumbing Code, Section 609.4
A repair is billed time-and-materials. Two plumbers work 3 hours each at $85 per hour per plumber, and materials cost $142 with a 15 percent markup on materials. What is the total bill?
Answer: $673.30
Labor = 2 plumbers x 3 h x $85 = $510. Materials with markup = 142 x 1.15 = $163.30. Total = 510 + 163.30 = $673.30. $652 omits the markup (510 + 142); $531.30 adds only the markup amount (510 + 21.30); $418.30 counts labor for just one plumber (255 + 163.30).
Reference: General trade practice, Estimating calculation (time and materials)
A contractor has a USA (811) ticket number for an excavation job that will last 6 weeks. How long is the ticket number valid, and what must be done if work continues beyond that time?
Answer: 28 calendar days; the ticket must be revalidated before it expires
Per the CSLB Law Book summary of Government Code 4216, the ticket number is valid for 28 calendar days. If work continues past 28 days, the excavator must notify the center again to revalidate the ticket before it expires.
Reference: CSLB Contractors License Law and Reference Book (2025), Gov. Code 4216 (Law Book, Ch. 4, Regional Notification Centers)
Under the CPC, how many slip joint fittings may be used on the outlet side of a fixture trap?
Answer: A maximum of one
CPC 1003.2 permits a maximum of one approved slip joint fitting on the outlet side of a trap. Also, no tubing trap may be installed without a listed tubing trap adapter.
Reference: 2025 California Plumbing Code, Section 1003.2
Sources
- CSLB: Examination study guides (content outlines) (opens in a new tab)
- CSLB: Examination FAQ (opens in a new tab)
- CSLB: List of all fees (opens in a new tab)
- CSLB: Get Licensed to Build (PDF) (opens in a new tab)
Questions last verified October 26, 2026. Licensing rules change. Always confirm current requirements with the licensing agency before you apply.